JET 14" Woodworking Bandsaws at

14" Open & Closed Stand Bandsaws

Closed stand models feature a rigid one-piece welded stand which requires no assembly
The open stand model features a widestance 16 gauge steel stand
All motors are totally enclosed and fan-cooled for long life
All three models are completely prewired and feature a unique quick connect motor-to-switch plug for easy set-up
Upper blade guide micro-adjustments
"V"-groove blade guide bar for consistent alignment
Graphite impregnated polymer "JET Blocks" in the blade guides for quicker set-up and a cooler running blade
Extra large 15" x 15" cast iron work table offset for more work area in front of the blade
3/8" woodworking blade; 6 teeth per inch
Built-in dust chute
A full 6" under guide cutting capacity with 13-1/2" blade to frame capacity.

Standard Equipment

Stand
2" dust chute
3/8" bandsaw blade

Additional Documentation

Woodworking Catalog Page

Adobe Acrobat Required to read these files.

Specifications
Stock Number:	708113	708115K	708116K	710115K
MODEL:	JWBS-14OS	JWBS-14CS	JWBS-14MW (For Aluminum & Light Steel Only)	JWBS-14DX
Cutting Cap'y (H/in):	6	6	6	6
Cutting Cap'y (W/in):	13-1/2	13-1/2	13-1/2	13 1/2
Min Saw Blade (W/in):	1/8	1/8	1/8	1/8
Max Saw Blade (W/in):	3/4	3/4	3/4	3/4
Saw Blade (L/in):	93-1/2	93-1/2	93-1/2	93 1/2
Table Size (in):	15 x 15	15 x 15	15 x 15	15 x 15
Table Tilt (R x L):	45 degrees x 10 degrees	45 degrees x 10 degrees	45 degrees x 10 degrees	45 degrees x 10 degrees
Stand Type:	Open	Closed	Closed	Closed
Table Height From Floor (in):	44	43-1/2	43-1/2	43-1/2
Dust Chute Diameter (OD/in):	2	2	2	4
Overall Dimensions (HxWxD/in):	68 x 34 x 20	68 x 26 x 19	68 x 26 x 19	68 x 26 x 19
Motor (TEFC):	3/4 HP, 1 Ph	1 HP, 1 Ph	1 HP, 1 Ph	1 1/4hp, 1 Ph,
	115/230V	115/230V	115/230V	115/230V
	Prewired 115V	Prewired 115V	Prewired 115V	Prewired 115
Blade Speed (SFPM):	3,000	3,000	735 - 1,470 - 2,350	3000
Net Weight (lbs):	172	185	194	190

Choose The Right Blade For Your Jet Bandsaw
STOCK NUMBER	BANDSAW SIZE (IN.)	BLADE LENGTH (IN.)	BLADE WIDTH (IN.)	PITCH (TPI)	TOOTH STYLE	BLADE THICKNESS
Carbon Steel - Made with carbon steel band stock, ground and set for sawing consistency
709370	14	93-1/2	1/8	14	Hook	0.02
709371	14	93-1/2	3/16	6	Skip	0.02
709373	14	93-1/2	3/8	4	Skip	0.02
709374	14	93-1/2	1/2	4	Hook	0.02
709375	14	93-1/2	3/4	4	Hook	0.02
709376*	14	105	1/8	14	Hook	0.02
709377*	14	105	3/16	6	Skip	0.02
709679*	14	105	3/8	4	Skip	0.02
709680*	14	105	1/2	4	Hook	0.02
709681*	14	105	3/4	4	Hook	0.02
Band Plus - Hardened tooth points and tempered flex-back, ground and milled teeth and band back, larger gullet capacity for a longer life
709351	14	93-1/2	1/8	14	Raker	0.025
709352	14	93-1/2	3/16	4	Skip	0.025
709354	14	93-1/3	1/4	6	Hook	0.025
709355	14	93-1/2	1/4	14	Raker	0.025
709356	14	93-1/4	3/8	4	Hook	0.025
709357	14	93-1/2	1/2	3	Hook	0.025
709358	14	93-1/5	1/2	6	Hook	0.025
709359	14	93-1/6	3/4	3	Hook	0.032
709361*	14	105	1/8	14	Raker	0.025
709362*	14	105	3/16	4	Skip	0.025
709364*	14	105	1/4	6	Hook	0.025
709366*	14	105	1/4	4	Hook	0.025
709367*	14	105	1/2	3	Hook	0.025
709368*	14	105	1/2	6	Hook	0.025
709369*	14	105	3/4	3	Hook	0.032
709276*	14	105	3/4	10	Raker	0.032
Silicon Steel - Higher content of silicon, narrow kerf and flex-back, full tooth is flame hardened and produces less friction for extended life
709588	14	93-1/2	3/16	10	Raker	0.025
709589	14	93-1/2	3/8	6	Hook	0.025
709590	14	93-1/2	3/8	10	Raker	0.025
709591	14	93-1/2	3/8	14	Raker	0.025
709592	14	93-1/2	1/2	4	Hook	0.025
709593	14	93-1/2	1/2	6	Hook	0.025
709488	14	93-1/2	3/4	3	Hook	0.032
709489	14	93-1/2	3/4	10	Raker	0.032
* Requires 6" Riser Block Assembly, Stock Number 708717—Includes 6" riser block, blade guard assembly, guide post, 105" bandsaw blade, mounting hardware and instructions