Comes with Stand and Mini Shrink Dies (1 set)
Reciprocating Hammer PH-19
Made in United States
Baileigh industrial is making metal forming easier and more available to the masses with the economical PH-19 reciprocating power hammer. The Baileigh Industrial PH-19 power hammer would be a great addition to any shop that has to form metal fast. The PH-19 is considered to be the little brother to the Baileigh Industrial MH-19 multi hammer. They took what they learned from the best hammer on the market, the MH-19 multi hammer, and created what they consider to be the best reciprocating hammer period. The PH-19 can do many of the same functions as the MH-19, shrink, stretch, dome, edge turn, bead, offset, but at a price that fits any budget. What is even better is that the PH-19 also accepts a lot of the readily available MH-19 tooling.
The PH-19 uses a 110V motor to produce 1700 beats per minute and enough force to shape 16 gauge mild steel. It also has a 19 inch deep throat to allow for even the most unique shaping designs. A tooling quick release handle allows the operator to start working in the middle of the panel with keeping the working pressure constant. A quick release bottom tooling holder makes life on the operator easy by making tooling changes a breeze.
Contact a customer service representative for more information on the PH-19 or any of the other great Baileigh Industrial products.
SPecifications | |
---|---|
Model | PH-19 |
Speed | 0 - 1700 beats / minute |
Mild Steel Capacity | 16 ga. |
Tooling Height Adjustment | 5 inch |
Throat Depth | 19 inch |
Capacity (Mild Steel) | 16 ga. |
Aluminum Capacity | 12 ga. |
Power | 110V |
Shipping Weight | 1,000 lbs. |
Shipping Dimensions | 60 x 48 x 84 inch |
Power Hammer PH-19VS
Made in United States
The PH-19VS takes over where the PH-19 reciprocating power hammer leaves off. By adding an inverter drive to an already potent machine,
Baileigh Industrial raised the bar again. When precise speed control is needed for those delicate jobs, the PH-19VS shines. Powered by 110 volts, the PH-19VS allows the operator to
control the beats per minute from 0 to 1700. The beats are controlled by either a foot pedal or a control box on the side of the machine, it is your choice.
The PH-19VS was designed from the MH-19, to give a more economical way to shape metal fast. Baileigh Industrial believes the PH-19VS is the best reciprocating power hammer on the market,
bar none. It has the ability to shrink, stretch, dome, edge turn, bead, and offset with the readily available tooling.
It also has a large 19 inch deep throat and a tooling quick release handle allows the operator to start working in the middle of the panel while keeping the working pressure constant. A quick release bottom tooling holder makes life on the operator easy by making tooling changes a breeze.
Contact a customer service representative for more information on the PH-19VS or any of the other great Baileigh Industrial products.
Specifications | |
---|---|
Model | PH-19-VS |
Speed | 0 - 1700 beats / minute |
Tooling Height Adjustment | 5 inch |
Throat Depth | 19 inch |
Capacity (Mild Steel) | 16 ga. |
Aluminum Capacity | 12 ga. |
Power | 110V |
Shipping Weight | 1,000 lbs. |
Shipping Dimensions | 60 x 48 x 84 inch |
Tooling | |
---|---|
PHD-ST-BT{00 | 1.5 RADIUS LOWER DIE, 2.0DIA. |
PHD-ST-BT{01 | 2.0 RADIUS LOWER DIE, 2.0DIA. |
PHD-ST-BT{02 | 3.0 RADIUS LOWER DIE, 2.0DIA. |
PHD-ST-BT{03 | 6.0 RADIUS LOWER DIE, 3.0DIA. |
PHD-ST-BT{04 | 8.0 RADIUS LOWER DIE, 3.0DIA. |
PHD-ST-BT{05 | 12.0 RADIUS LOWER DIE, 3.0DIA. |
PHD-ST-BT{06 | 24.0 RADIUS LOWER DIE, 3.0DIA. |
PHD-ST-BT{07 | 36.0 RADIUS LOWER DIE, 3.0DIA. |
PHD-ST-BT{08 | 1.0F X 6.0R LOWER PLANISHING, 3.0DIA. |
PHD-ST-TO{00 | P-FLAT}Master Flat Top Die, 3.0"dia |
PHD-ST-TO{02 | RUBBER TOP DIE, 80 DUROMETER, 3.0DIA. |
PHD-UTHS-{00 | UNIV. TOOL HOLDERS (2) .5 OPENING, 2.0DIA. |
PHD-ST-BT{09 | .5 LINEAR LOWER STRETCH DIE, 3.0DIA. |
PHD-BDS-0250 | 1/4" Beading Dies (2) |
PHD-SH-ME{00 | MECHANICAL SHRINK DIES (2) 1 X 2 |
PHD-ST-ME{00 | MECHANICAL STRETCH DIES (2) 1 X 2 |
PHD-THDS-V4 | Thumbnail Shrink Dies (2) 3.0"dia. |
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR BEST BROTHER-IN-LAW PRICE & FREE SHIPPING
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR BEST BROTHER-IN-LAW PRICE & FREE SHIPPING