|
 .
The 31-735A includes 1-1/2
HP, 230 volts, 60 Hz, 3,450 RPM, single phase TEFC motor and
push-button switch, two tilting tables, 4-1/2" arbor pulley, guard
for arbor pulley, V-belt, 80-grit aluminum oxide belt, 50-grit
aluminum oxide disc. |
|
6" Belt/12" Disc
Finishing Machine
Features:
- Handles 90 to 95% of your finishing operations
- 4" dust port can be used with the micron bag provided or can
be attached to a standard 4" dust collection system and built-in
dust collector fan that collects dust from the body of the
machine and exhausts into the bag. 5 micron bag provided but is
not intended for metal dust collection, but is for wood sanding
only
- Intregrated mobile base for ease of mobility
- The right speeds make it well suited for both metal and wood
shops
- Belt operates at any angle-vertically, horizontally or any
degree in between
- Large tables are scientifically ribbed to prevent distortion
- Furnished with sliding pivot pin for circle sanding
- **1 phase electricals will be supplied wired for 230V. Power
cord and plug supplied for single phase only. Motors and motor
controls may be ordered unmounted
|
|
SPECIFICATIONS |
|
Motor:
|
1 Phase, 1-1/2 HP, 240V, 60 Hz,
3,450 RPM motor with push-button switch, 140 lbs |
|
Abrasive Belt Size:
|
6" x 48 " |
|
Speeds:
|
Belt speed: 3,000 SFPM; Disc Speed:
2,100 SFPM |
|
Table Size: |
Belt Table: 15" x 7-1/2"; Disc
Table: 16-1/2" x 12 " |
|
Miter Gauge Groove |
3/8" x 3/4" |
|
Table Tilt:
|
Belt: tilts 45° down and 20° up;
Disc: tilts 45° down and up 20 ° |
|
Dust Port Diameter:
|
4 " |
|
Sanding Drum:
|
N/A |
|
Width:
|
35 " |
|
Length:
|
21 " |
|
Height:
|
58 " |
|
Weight:
|
350 lbs |
|
Shipping Weight: |
391 lbs |
|
