|
The 15-263 includes motor and controls, belt and pulley guard, belt
and motor pulley (supplied wit 5/8" bore unless 1/2" bore is
specified), self-locking depth stop, depth gage, self-ejecting chuck
key. |
|
15" Production
Drill Press
Features:
- Extra-large spindle bearings "6 PLUS 6" and "VS6" spindle
and spindle pulley are supported by four over-sized, pre-loaded,
lubrcated-for-life ball bearings. Massive quill is a full 2"
diameter. "VS6" has the same excellent construction, PLUS an
extra bearing below the spindle pulley. This fine combination of
features assures freedom from chatter, long, maintenance-free
life and maximum pressure at the drill point.
- Wide, test-proven speed range gives you a true 10-to-1 speed
ratio. You get the exact speed you need for every drillingjob on
any material- 450 to 4700 rpm with a 1725 rpm motor and 300 to
3100 with an 1140 rpm motor.
- Quick belt tension release is provided by the pivoting motor
mounting plate which has a reverse, self-locking taper on the
spring loaded, rubber-tipped plunger that quickly restores
correct belt tension.
- Extra-long quill travel gives the extra depth you need for
deep-hole jobs like skip and gang drilling... PLUS, the extra
stroke required for clearing jigs and fixtures.
- Six speeds offer unbelievably wide range of speeds with a
low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500
rpm- 11.8 to 1 speed ratio. You can choose an extra-slow speed
for drilling very hard materials... an extra-fast speed for
working soft materials... or an optimum speed for any size bit
material.
- Efficient variable-speed drive lets you select any spindle
speed instantly while machine is running. A self-locking cam,
plus a "snubber" feature, hold speed settings constant under all
load conditions. Proper belt tension is automatically maintained
for full power transmission.
|
|
SPECIFICATIONS |
|
Motor: |
3
Phase, 3/4 HP |
|
Motor Control:
|
24V Push-Button Station, Magnetic
Starter, Transformer and 3- Leg Overload Protection (LVC) |
|
Speeds:
|
With 1,725 RPM motor: 450 to 4,700
RPM
With 1,140 RPM motor: 300 to 3,100 RPM
|
|
Table Size |
: Standard: 11" x 14" (279 x 356
mm) Production (overall): 15-1/2" x 21-1/2" (394 x 546 mm)
Production (inside of collant trough): 12" x 18" (305 x 457 mm) " |
|
Table Tilt:
|
90° L and R ° |
|
Column Diameter:
|
2-3/4"(70 mm) " |
|
Quill Diameter: |
2" (51 mm) " |
|
Quill Stroke:
|
6" (152 mm) " |
|
Key Chuck Capacity:
|
(With Std. Jacobs #33 taper) 1/2"
(13 mm) " |
|
Height:
|
"6 PLUS 6: 71-1/2" (1816 mm)
VS6: 74" (1880 mm) " |
|
Width:
|
Tilting Table: 15-1/2" (394 mm)
21-1/2" (546 mm) " |
|
Weight:
|
283 lbs (127 kg) |
|
