 |
Standard Features
-
ISO 9001 certified
-
Large spindle bore 5 1/8”
-
Heavy Duty spindle D1-11
-
Heavy Duty guideway width 21-11/16”
-
Heavy Duty main motor 20 HP
-
18 spindle speeds from 7.5 to 1,000 rpm
-
74 kinds of inch threads, and 58 kinds of metric threads
-
Threading and feeding rate change without changing gears
-
4-way rapid traverse to carriage and cross slide
-
Spindle is balanced, hardened and precision ground
-
Spindle is supported at 3-point by high precision
bearings
-
All gears and shafts are hardened and precision ground
-
Guideways induction hardened and precision ground
-
Automatic lubrication system in headstock and feed box
-
Hand oil pump on apron for all guide ways lubrication
-
Adjustable hydraulic clutch for spindle turning and
brake
-
Power source: 220V/208V, 3 phase ( 440V/460V is optional
)
-
One year warranty for parts
|
Standard Equipment
-
15” 3-jaw chuck & 25” 4-jaw chuck, both chucks with top
reversible jaws
-
31 ½” Face plate
-
12” drive plate
-
16” large steady rest with roller jaws
-
Follow rest
-
Removeable gap
-
4-way tools post
-
Remote foot brake
-
Work light and coolant system
-
Section splash guard on rear of carriage
-
(2) dead centers and (1) reducing sleeve
-
Thread chasing dial
-
4-way rapid traverse
-
Tool box
|
Optional Equipment
-
Taper turning attachment # TA-26160
-
10” steady rest with roller jaws # SR-10-26160
-
24” large steady rest with roller jaws # SR-24-26160
-
Leveling pads # LPAD-26160 (#GML-32120 needs 12 pieces
leveling pads, and # GML-32160 needs 14 pcs)
-
20” 3-jaw chuck # D11-3J-20, add extra
-
24” 3-jaw chuck # D11-3J-24, add extra
-
32” 4-jaw chuck # D11-4J-32, add extra
-
DRO for #GML-3280,NEWALL # NW1880, 2 axis
-
DRO for #GML-32120,NEWALL # NW18120,2 axis
-
DRO for #GM-32160,NEWALL # NW18160, 2 axis
-
DRO for #GML-32200,NEWALL # NW18200, 2 axis
-
DRO for #GML-32240,NEWALL # NW18240, 2 axis
|
|
SPECIFICATIONS |
| Model |
GML-3280 |
GML-32120 |
GML-32160 |
GML-32200 |
GML-32240 |
| Max. swing over bed |
32” |
| Max. length
of workpiece |
80” |
120” |
160” |
200” |
240” |
| Max. swing over cross slide |
20 ½” |
| Max. Swing in
gap |
39-1/8” |
| Width of Bed |
21 3/4” |
| Effective
length in gap to spindle |
14” |
| Effective length in gap to
chuck |
9” |
| Spindle bore |
5 1/8”, D1-11 |
| Taper of spindle center |
M.T.# 5 |
| Spindle
speeds |
7.5 – 1,000 rpm / 18 steps |
| Longitudinal feeds |
0.002-0.96 IPR,
64 kinds |
| Cross feeds |
0.001-0.48 IPR, 64 kinds |
| Inch threads |
32-1/16 TPI, 74
kinds |
| Metric
threads |
1-256 mm , 58 kinds |
| Module threads |
0.5-128 mm, 58
kinds |
| Diametral
pitch threads |
32 – 1/8 DP , 58 kinds |
| Max. travel of top slide |
8” |
| Max. travel
of cross slide |
19 1/2” |
| Longitudinal rapid travel speed |
150” / min. |
| Cross slide
rapid travel speed |
75” / min. |
| Diameter of tailstock quill |
5” |
| Max. travel
of tailstock quill |
9 ½” |
| Taper of tailsotck quill center |
M.T. # 6 |
| Main motor |
20 HP, 220V or 440V, 3 phase, prewired on 220V |
| Rapid traverse motor |
2 HP, 220 V or
440V, 3 phase, prewired on 220V |
| Coolant pump
motor |
1/8 HP, 220V or 440V, 3 phase, prewired on 220V |
| Net weight, approx. LBS |
11,300 |
11,900 |
12,900 |
13,500 |
14,200 |
| Overall
dimensions,LxWxH, inch |
178x59x76 |
212x59x76 |
288x59x76 |
296x59x76 |
337x59x76 |
|
|
GMCGML-3280
$29,950.00
"32"" x 80"" 5-1/8"" Spindle bore , 20 HP, 220V/440V, 3 ph ====> FREE FREIGHT On This Order Anywhere within the Continental US, Note: Any Tailgate/Residential Charges NOT INCLUDED!"
|
GMCGML-32120
$31,950.00
"32"" x 120"" 5-1/8"" Spindle bore , 20 HP, 220V/440V, 3 ph ====> FREE FREIGHT On This Order Anywhere within the Continental US, Note: Any Tailgate/Residential Charges NOT INCLUDED!"
|
GMCGML-32160
$34,950.00
"32"" x 160"" 5-1/8"" Spindle bore , 20 HP, 220V/440V, 3 ph ====> FREE FREIGHT On This Order Anywhere within the Continental US, Note: Any Tailgate/Residential Charges NOT INCLUDED!"
|
GMCGML-32200
$44,950.00
"32"" x 200"" 5-1/8"" Spindle bore , 20 HP, 220V/440V, 3 ph ====> FREE FREIGHT On This Order Anywhere within the Continental US, Note: Any Tailgate/Residential Charges NOT INCLUDED!"
|
GMCGML-32240
$47,950.00
"32"" x 240"" 5-1/8"" Spindle bore , 20 HP, 220V/440V, 3 ph ====> FREE FREIGHT On This Order Anywhere within the Continental US, Note: Any Tailgate/Residential Charges NOT INCLUDED!"
|
GMCNW1880
$2,850.00
"NEWALL DRO for GML-3280, 2 axis, free install only when purchased with Machine ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate"
|
GMCNW18120
$3,450.00
"NEWALL DRO for GML-32120, 2 axis, free install only when purchased with Machine ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate"
|
GMCNW18160
$4,950.00
"NEWALL DRO for GM-32160, 2 axis, free install only when purchased with Machine ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate"
|
GMCNW18200
$5,950.00
"NEWALL DRO for GML-32200, 2 axis, free install only when purchased with Machine ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate"
|
GMCNW18240
$6,950.00
"NEWALL DRO for GML-32240, 2 axis, free install only when purchased with Machine ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate"
|
GMCSR10-32160
$850.00
10” steady rest with roller jaws ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate
|
GMCSR24-32160
$1,950.00
24” large steady rest with roller jaws ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate
|
GMCLPAD-32160
$55.00
Leveling pads ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate
|
GMCD11-3J-20
$1,950.00
20” 3-jaw chuck ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate
|
GMCD11-3J-24
$2,350.00
24” 3-jaw chuck ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate
|
