 |
Standard Features:
|
Standard Equipment:
-
15” 3-jaw chuck with top reversible jaws
-
25” 4-jaw chuck with top reversible jaws
-
31 ½” Face plate
-
12” drive plate
-
16” large steady rest with roller jaws
-
Follow rest
-
Removeable gap
-
4-way tools post
-
Remote foot brake
-
Work light and coolant system
-
Section splash guard on rear of carriage
-
(2) dead centers and (1) reducing sleeve
-
Thread chasing dial
-
4-way rapid traverse on carriage
-
tool box
|
Optional Equipment:
-
Taper turning attachment # TA-40160
-
Leveling pads, need (8)pcs for both models# LPAD-32160
-
20” 3-jaw chuck, upgraded #D11-3J-20
-
24” 3-jaw chuck, upgraded # D11-3J-24
-
32” 4-jaw chuck, upgraded # D11-4J-24
-
10” steady rest with roller jaws # SR10-32160
-
24” large steady rest with roller jaws # SR-24-32160
-
DRO for #GML-4080,NEWALL # NW2080, 2 axis
-
DRO for #GML-40120,NEWALL # NW20120, 2 axis
-
DRO for #GM-40160,NEWALL # NW20160, 2 axis
-
DRO for #GML-40200,NEWALL # NW20200, 2 axis
-
DRO for #GML-40240,NEWALL # NW20240, 2 axis
|
|
SPECIFICATIONS |
| Model |
GML - 4080 |
GML- 40120 |
GML - 40160 |
GML - 40200 |
GML - 40240 |
|
Max. swing over bed |
40” |
|
Max. length of workpiece |
80” |
120” |
160” |
200” |
240” |
|
Max. swing over cross slide |
28” |
|
Max. Swing in gap |
48” |
|
Width of Bed |
21-11/16” |
|
Effective length in gap to spindle |
14” |
|
Effective length in gap to chuck |
9” |
|
Spindle bore |
5 1/8” , D1-11 |
|
Taper of spindle center |
M.T.# 5 |
|
Spindle speeds |
7.5 – 1,000 rpm / 18 steps |
|
Longitudinal feeds |
0.002-0.96 IPR, 64 kinds |
|
Cross feeds |
0.001-0.48 IPR, 64 kinds |
|
Inch threads |
32-1/16 TPI, 74 kinds |
|
Metric threads |
1-256 mm , 58 kinds |
|
Module threads |
0.5-128 mm, 58 kinds |
|
Diametral pitch threads |
32 – 1/8 DP , 58 kinds |
|
Max. travel of top slide |
8” |
|
Max. travel of cross slide |
19 -3/4” |
|
Longitudinal rapid travel speed |
150” / min. |
|
Cross slide rapid travel speed |
75” / min. |
|
Diameter of tailstock quill |
5” |
|
Max. travel of tailstock quill |
9 ½” |
|
Taper of tailsotck quill center |
M.T. # 6 |
|
Main motor |
20 HP, 220V or 440V, 3 phase, prewired on 220V |
|
Rapid traverse motor |
2 HP, 220 or 440V, 3 phase, prewired on 220V |
|
Coolant pump motor |
1/8 HP, 220V or 440V, 3 phase, prewired on 220V |
|
Machine weight, approx., LBS |
13,100 |
13,900 |
14,800 |
15,800 |
16,700 |
|
Overall dimensions, LxWxH |
177x61x79 |
212x61x79 |
288x61x79 |
296x61x79 |
337x61x79 |
|
|
GMCGML-4080
$33,950.00
"40"" x 80"" 5-1/8"" Spindle bore , 20 HP, 220V/440V, 3 ph ====> FREE FREIGHT On This Order Anywhere within the Continental US, Note: Any Tailgate/Residential Charges NOT INCLUDED!"
|
GMCGML-40120
$37,950.00
"40"" x 120"" 5-1/8"" Spindle bore , 20 HP, 220V/440V, 3 ph ====> FREE FREIGHT On This Order Anywhere within the Continental US, Note: Any Tailgate/Residential Charges NOT INCLUDED!"
|
GMCGML-40160
$43,950.00
"40"" x 160"" 5-1/8"" Spindle bore , 20 HP, 220V/440V, 3 ph ====> FREE FREIGHT On This Order Anywhere within the Continental US, Note: Any Tailgate/Residential Charges NOT INCLUDED!"
|
GMCGML-40200
$47,950.00
"40"" x 200"" 5-1/8"" Spindle bore , 20 HP, 220V/440V, 3 ph ====> FREE FREIGHT On This Order Anywhere within the Continental US, Note: Any Tailgate/Residential Charges NOT INCLUDED!"
|
GMCGML-40240
$52,950.00
"40"" x 240"" 5-1/8"" Spindle bore , 20 HP, 220V/440V, 3 ph ====> FREE FREIGHT On This Order Anywhere within the Continental US, Note: Any Tailgate/Residential Charges NOT INCLUDED!"
|
GMCNW20120
$3,550.00
"NEWALL DRO for #GML-40120, 2 axis, free install only when purchased with Machine ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate"
|
GMCNW20160
$5,150.00
"NEWALL DRO for #GM-40160, 2 axis, free install only when purchased with Machine ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate"
|
GMCNW20200
$5,950.00
"NEWALL DRO for #GML-40200, 2 axis, free install only when purchased with Machine ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate"
|
GMCNW20240
$6,950.00
"NEWALL DRO for #GML-40240, 2 axis, free install only when purchased with Machine ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate"
|
GMCNW2080
$2,950.00
"NEWALL DRO for #GML-4080, 2 axis, free install only when purchased with Machine ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate"
|
GMCLPAD-32160
$55.00
Leveling pads ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate
|
GMCD11-3J-20
$1,950.00
20” 3-jaw chuck ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate
|
GMCD11-3J-24
$2,350.00
24” 3-jaw chuck ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate
|
GMCD11-4J-24
$2,950.00
32” 4-jaw chuck ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate
|
GMCSR10-32160
$850.00
10” steady rest with roller jaws ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate
|
GMCSR24-32160
$1,950.00
24” large steady rest with roller jaws ---->FREE FREIGHT On This Item Only When Ordered with a GMC Gap Bed Lathe-Otherwise See UPS Chart For Freight Rate
|
