GMC TL-618EVS & TL-618E Toolroom Lathes at

Picture Shown Above is TL-618E Model

Standard Features

Made in Taiwan
ISO 9001 certified
Spindle run-out within 0.00005” ( 50 millionths inch )
Turcite-B coating on guideways
3HP Yaskawa inverter drive spindle motor
Infinity Yaskawa inverter drive spindle speeds from 0-4,000 rpm
Easy to read digital readout on actual spindle rpm speeds
Electric variable automatic feeding control on carriage and cross slide
Quick change tool post slide for threading
Dual range inch/metric quick change gear box for model # GMCTL-618EVS
Digital control & inverter drive gearbox ( no change gear ) for #GMCTL-618E, easy cutting threads, variable inch / metric threads range
Automatic thread length control w/ fine adjustable stops for accurate threading
36 kinds of inch threads, and 36 kinds of metric threads
Spindle is balanced, hardened and precision ground
High precision pre-loaded angular contact bearings for spindle
Lubrication system for headstock, feed box, ways and leadscrews
Power 220V, 3 phase ( 220V, 1 phase is optional )
One year industrial warranty for parts

Standard Equipment for GMC TL-618EVS & TL-618E

5C collet closer installed
Quick change gear box
8” drive plate with drive dog
Dual inch / metric dials
Drive gear
Coolant system
Halogen work light
Tool box with tools

Optional Accessories

6” zero-set 3-jaw chuck with taper back plate
Taper turning attachment (installation is optional)
Full length rear splash guard
NEWALL DRO C80
33 pc round 5C collet set, from 1/16 to 1-1/16” by 32ndth
13 pc hexagon 5C collet set, 1/8” to 7/8” by 1/16^th
11 pc square 5C collet set, 1/8” to ¾” by 1/16”
220V, 1 phase version ( upgrade to 5HP inverter)

Specifications:
Model No.	GMC TL-618EVS	GMC TL-618E
Max. swing over cross slide	6”	6”
Distance between centers	18”	18”
Max. swing over bed	11”	11”
Swing over carriage	9”	9”
Spindle capacity:
with 3-jaw chuck	6”	6”
With expanding collets	3”	3”
With round 5C collets	1-1/16”	1-1/16”
With hexagon 5C collets	7/8”	7/8”
With Square 5C collets	3/4”	3/4 ”
With step chucks	1-1/16” to 6”	1-1/16” to 6”
Spindle nose diameter	2.189”	2.189”
Spindle nose ID/OD	5C / 4 degree taper	5C / 4 agree taper
Spindle thru hole	1-1/4”	1-1/4”
Bar stock diameter with 5C closer	1-1/16”	1-1/16”
Variable spindle speeds	0-4,000 rpm (5C) / 0-3,000 rpm ( with 6” 3-jaw chuck)
Other Specifications
Leadscrew diameter / pitch	1” / 8TPI	1” / 8 PTI
Carriage power feed speed range	5/16” to 7” /min	5/16” to 7” / min
Cross slide power feed range	3/16” to 4” / min.	3/16” to 4 “ / min
Cross slide travel	6”	6”
Quick change compound slide travel	0.1”	0.1”
Compound slide travel	3”	3”
Inch threads	11-118 TPI , 36 kinds	4-120 TPI , variable
Metric threads	0.275-2.7mm, 36 kinds	0.2-6.35mm, variable
Tailstock quill diameter	1-3/8”	1-3/8”
Tailstock quill taper	MT# 2	MT# 2
Tailstock quill travel	3-3/4”	3-3/4”
Spindle motor ( inverter drive )	3HP, 220V, 3 phase	3HP, 220V , 3 phase
DC feeding motor	110V, 70 W	110V, 70 W
Inverter drive for gear box	N/A	1/2 HP,220V, 3phase
Coolant pump	1/8HP, 220V, 3 phase	1/8HP, 220V, 3phase
Machine weight , approx	2,530 LBS	2,640 LBS
Machine dimensions, LxWxH	73” x 30”x 67”	73” x 30” x 67”