E-Mail Us Today!
Click Here

Southern-Tool.Com
Call Us Toll Free: 1-800-458-3687
Phone: 786-866-9865   Fax: 865-376-9792 
New Extended Hours
Customer Service: M - F / 8:00  -  7:00 EST

Satisfying Customers  
Since 1954!

Join our Mailing List

New & Featured Products

FREE Tooling!
Or FREE Freight
New
MH-0215-0M10-sm.jpg
New!
ZABJ-20C3-th.jpg
New!
New!
new-250-E.jpg
Edwards Defelsko Hiretech Wilton Van Mark ICS Baileigh Space Heaters ESAB Zinko CST Bomag Cana-Vac
   

Original Saw Accessories

Original Saw Blades
 

   
Wood Cutting Saw Blades
T2008-00 12” x 48t x 1” carbide
T2008-01 12” x 60t x 1” carbide
T2008-03 12” x 100t x 5/8 carbide
T2008-09 13” x 72t x 5/8 carbide
 (type 1-3 3512)
T2009-00 14” x 40t x 1” carbide
T2009-01 14” x 80t x 1” carbide
T2009-02 14” X 60t x 1” carbide
Wood Cutting Saw Blades
T2009-03 14” x 100t x 1” carbide
T2010-00 16” x 40t x 1” carbide
T2010-01 16” x 60t x 1” carbide
T2010-02 16” x 80t x 1” carbide
T2010-03 16” x 100t x 1” carbide
T2011-00 20” x 60t x 1” carbide
T2011-01 20” x 80t x 1” carbide
T2014-00 22” x 80t x 1” carbide

Metal Cutting Saw Blades

T1413-00 14” x 100t x 1” carbide –non ferrous
T1613-00 16” x 100t x 1” carbide –non ferrous
T1614-00 16” x 300t x 1” HSS —ferrous
T1618-00 18” x 300t x 1” HSS—ferrous
T2013-00 20” x 120t x 1” carbide non ferrous
T2014-02 22” x 120t x 1” carbide non ferrous
     

Original Saw Clamping Systems
 

   
clamp1.jpg
Rear Pushing cylinder
(presses against fence)
clamp2.jpg
Over Center Clamp
(presses down on table)
clamp3.jpg
Multi-Part over arm clamping system
Original Saw’s Pneumatic clamping systems allow for a variety of clamping applications. The below listed items consist of cylinders clamping the material back against the fence or over center cylinders clamping the material against the table top, or a combination of both. The front firing cylinders are mounted on adjustable slide carriages with locking handle to adjust to any material width. The over center clamps are mounted behind the fence and when not clamped are fully behind the fence to allow for clear loading and unloading of the machine.

900500-00

Pneumatic clamping system
2 cylinders clamp against fence

900500-01

Pneumatic clamping system
2 cylinders clamp against fence
2 cylinders clamp against table

900500-02

Pneumatic clamping system
2 cylinders clamp against fence

     
SS Series Sliding Stops  

slstops1.jpg

Our manual adjustable sliding stop system is designed to stand up to rigorous daily use and heavy material. The system consists of a heavy extruded aluminum rail with measuring tape, a powder coated formed steel slide assembly with locking knob, and an adjustable aluminum extrusion used to fine tune the system and allows it to measure down to 2”. These stops attach to our roller tables with included mounting hardware, and are available in 8’ and 16’ sections and it both right and left hand configurations.

900700

Sliding Stops


 

   
Roller Tables  
040030-01 Roller Table Extension with adjustable leg Wood Cutting 20” wide by 8’ long roller table with 8 rollers set on 12” centers. Ships complete with adjustable leg and mounting bracket for Heavy Duty and Super Duty Series wood cutting Radial Arm Saws
040030-02 Roller Table Extension with adjustable leg Wood Cutting 20” wide by 8’ long roller table with 15 rollers set on 6” centers. Ships complete with adjustable leg and mounting bracket for Heavy Duty and Super Duty Series wood cutting Radial Arm Saws
040030-03 Roller Table Extension with adjustable leg Metal Cutting Left Hand side mounting 20” wide by 8’ long roller table with 8 rollers set on 12” centers. Ships complete with adjustable leg and mounting bracket for Super Duty Series Metal Cutting Radial Arm Saws
040030-04 Roller Table Extension with adjustable leg Metal Cutting Right Hand side mounting 20” wide by 8’ long roller table with 8 rollers set on 12” centers. Ships complete with adjustable leg and mounting bracket for Super Duty Series Metal Cutting Radial Arm Saws
040030-05 Roller Table Extension with adjustable leg Metal Cutting Left Hand side mounting 20” wide by 8’ long roller table with 15 rollers set on 6” centers. Ships complete with adjustable leg and mounting bracket for Super Duty Series Metal Cutting Radial Arm Saws
T1735 Adjustable leg kit ( one included with above kits (040030-01 – 040030-10) Includes: leg stand, adjustable foot kit, mounting hardware
040030-07 Roller Table Extension with adjustable leg Wood Cutting Contractor Duty Series Left hand side mounting 20” wide by 8’ long roller table with 8 rollers set on 12” centers. Ships complete with adjustable leg and mounting bracket for Contractor Duty Series
040030-08 Roller Table Extension with adjustable leg Wood Cutting Contractor Duty Series Right hand side mounting 20” wide by 8’ long roller table with 8 rollers set on 12” centers. Ships complete with adjustable leg and mounting bracket for Contractor Duty Series
040030-09 Roller Table Extension with adjustable leg Wood Cutting Contractor Duty Series Left hand side mounting 20” wide by 8’ long roller table with 15 rollers set on 6” centers. Ships complete with adjustable leg and mounting bracket for Contractor Duty Series
040030-10 Roller Table Extension with adjustable leg Wood Cutting Contractor Duty Series Right hand side mounting 20” wide by 8’ long roller table with 15 rollers set on 6” centers. Ships complete with adjustable leg and mounting bracket for Contractor Duty Series
040030 Roller Table Extension table and rollers only no legs 20” wide by 8’ long roller table with 8 rollers set on 12” centers
040030-06 Roller Table Extension with adjustable leg Metal Cutting Right Hand side mounting 20” wide by 8’ long roller table with 15 rollers set on 6” centers. Ships complete with adjustable leg and mounting bracket for Super Duty Series Metal Cutting Radial Arm Saws
     
Manual Chain Feed    
Super20Duty20Chain20Feed.jpg (standard on metal cutter)

Provides full control for heavy production work, for heavy sawing, dadoing, and rafter notching. For Super Duty models only.
 
40021 Chain Feed -- 44" Arm for Models #3551, 3571, 3553
40022 Chain Feed -- 52" Arm for Models #3556, 3576, 3558
   
Adjustable Arm Stop  
35003 Adjustable Crosscut Stop
   
 
   
ORGT2008-00
$145.80 $142.88
12” x 36 tooth carbide x 1” arbor - Wood 0o hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORGT2008-01
$149.22 $146.24
12” x 60 tooth carbide x 1” arbor—Wood negative hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORGT2008-03
$185.70 $181.99
12” x 100 tooth carbide x 1” arbor –Wood negative hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORGT2008-09
$137.50 $134.75
13” x 72 tooth carbide x 5/8 arbor - Wood negative hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORGT2009-00
$180.44 $176.83
14” x 40 tooth carbide x 1” arbor - Wood positive hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORGT2009-02
$149.13 $146.15
14” x 60 tooth carbide x 1” arbor - Wood positive hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORGT2010-00
$153.69 $150.62
16” x 40 tooth carbide x 1” arbor - Wood positive hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORGT2010-01
$178.43 $174.86
16” x 60 tooth carbide x 1” arbor - Wood positive hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORGT2011-00
$206.51 $202.38
20” x 60 tooth carbide x 1” arbor - Wood positive hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORGT2011-01
$289.00 $283.22
20” x 80 tooth carbide x 1” arbor - Wood positive hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORGT2012-00
$352.89 $345.83
20” x 300 tooth HSS x 1” arbor - Ferrous zero hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORGT2013-00
$381.88 $374.24
20” X 120 tooth carbide x 1” arbor - non ferrous negative hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORGT2014-00
$364.58 $357.29
22” x 80 tooth carbide x 1” arbor Wood negative hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORGT2014-02
$531.25 $478.13
22” x 120 tooth carbide x 1” arbor Non-ferrous negative hook +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORG900500-00
$1,425.00 $1,368.00
Pneumatic Clamping System (2 Cylinder front only) +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORG900500-01
$1,550.00 $1,488.00
Pneumatic Clamping System (4 Cylinders front and over fence) +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORG900500-02
$1,925.00 $1,848.00
Pneumatic Clamping System (overarm clamp & front pushing cylinders) for cutting and clamping multiple pieces of material at one time +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORG40021
$385.49 $377.78
Chain Carriage Cross feed 44” ARM (Manual) +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORG40022
$404.21 $396.13
Chain Carriage Cross feed 52” ARM (Manual) +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif 
 
   
ORG900700-01
$470.00 $423.00
Manual Stops 8 foot left side mounting R-L reading +++> Call 1-800-458-3687 For Freight Rate.
tab_blue_button_add.gif