 |
Here’s “The
Original” - Model EF1459 – The Bandsaw that Cuts Metals, Plastics
and Woods Safely and Efficiently
Roll-In Saw built its reputation on the
versatility and durability of this terrific bandsaw – the EF1459,
a.k.a, “The Original.” This was the first saw in America to use a
patented gravity-feed system that saves time and energy.
The EF1459 is actually a horizontal bandsaw on a
vertical frame. An all-purpose band saw, it handles all metals,
plastics, and woods in a wide variety of cuts. It is a fast,
accurate cut-off machine that is perfect for notching, slitting, and
slotting. A reliable addition to your shop floor, this bandsaw
doubles as a contour, profile, and rip saw.
Accurate Gravity Feed
The EF1459 band saw has a capacity of 14½ inches
under the guides and a 9 inch cut. The blade and vertical column
travel on an inclined track that feeds into the cut in a straight
path. Gravity enables the blade to find its most efficient feed
rate. Counterweight control provides adjustment for optimum cutting
pressure and long blade life. The work piece remains stationary and
your hands need not be in the cutting area during cut-off, an
important safety feature.
Hydraulic Feed Control and Blade Shield
The Roll-In Saw Vertical EF1459 is equipped with a
hydraulic safety feed regulator and adjustable saw blade guard. An
adjustable stop can be pre-set to control the depth that the blade
travels into the work.
High Quality Yet Cost-Effective
The Roll-In Saw EF1459 is equipped with a
large, rigid 18 ½ inch x 30 inch precision-ground table. Hardened
grooved roller guides allow blades from ¼ to ¾ inch wide without
adjustment. Blade wheels have rubber tires to prevent blade
slippage. The bandsaw comes furnished with an angle plate swivel
work block, large C-clamp, blade/speed selector chart, blade, one
horsepower motor and switch. It is available in either 110V or 220V
single-phase, or 220V or 440V three-phase options. |
 Optional
Equipment
- 1" Guide Rollers
- Casters 4 per set
- Chip dust blower
- Contour guide assembly
- Saw Master accessory Package
- Factory installed work light
- 1" or 5/8" welder, grinder and shear/bench model
 |
|
SPECIFICATIONS |
| Capacity Under Guides |
14 1/2" |
| Throat |
8 3/4" |
| Blade Travel |
9" Blade travel into work |
| Blade Size |
3/4" Width x 8/12T x 10'
Length .035 thick (bi-metal) |
| Blade Guards |
Covers 4 step pulleys and
blade |
| Guide Rollers for Blade Width |
1/4", 3/8", 1/2", 5/8", and
3/4" |
| Blade Speeds |
70, 140, 270, and 525 fpm |
| Table |
Precision ground, cast iron
table, 18 1/2" x 30" |
| Table Height |
30" from floor |
| Wheels |
Cast iron, 14" x 1 1/8" |
| Wheels Tires |
Replaceable rubber |
| Motor |
1HP, 110/220V, 60-cycle
single-phase
1HP, 220/440V, 60-cycle three-phase |
| Dimensions |
30" Width x 66" Height x 40"
length |
| Shipping Weight |
585 lbs F.O.B. Cleveland Ohio |
|
