chat now with southern tool
Chat Now!
Call 1-800-458-3687
Monday - Friday 8:00 AM- 7:00 PM ET

 
FREE FREIGHT on ALL Jet, Powermatic, Wilton and Performax Orders! over $199.99

Roll-In Saw EF1459 Bandsaw

 

Here is The Original - Model EF1459 -  The Bandsaw that Cuts Metals, Plastics and Woods Safely and Efficiently

Roll-In Saw built its reputation on the versatility and durability of this terrific bandsaw  the EF1459, a.k.a, The Original.  This was the first saw in America to use a patented gravity-feed system that saves time and energy. 

The EF1459 is actually a horizontal bandsaw on a vertical frame.  An all-purpose band saw, it handles all metals, plastics, and woods in a wide variety of cuts.  It is a fast, accurate cut-off machine that is perfect for notching, slitting, and slotting.  A reliable addition to your shop floor, this bandsaw doubles as a contour, profile, and rip saw.

Accurate Gravity Feed

The EF1459 band saw has a capacity of 14-½ inches under the guides and a 9 inch cut.  The blade and vertical column travel on an inclined track that feeds into the cut in a straight path.  Gravity enables the blade to find its most efficient feed rate.  Counterweight control provides adjustment for optimum cutting pressure and long blade life.  The work piece remains stationary and your hands need not be in the cutting area during cut-off, an important safety feature.

Hydraulic Feed Control and Blade Shield

The Roll-In Saw Vertical EF1459 is equipped with a hydraulic safety feed regulator and adjustable saw blade guard.  An adjustable stop can be pre-set to control the depth that the blade travels into the work.

High Quality Yet Cost-Effective

The Roll-In Saw EF1459 is equipped with a large, rigid 18 ½ inch x 30 inch precision-ground table.  Hardened grooved roller guides allow blades from ¼ to ¾ inch wide without adjustment.  Blade wheels have rubber tires to prevent blade slippage.  The bandsaw comes furnished with an angle plate swivel work block, large C-clamp, blade/speed selector chart, blade, one horsepower motor and switch.  It is available in either 110V or 220V single-phase, or 220V or 440V three-phase options.

Technical Data
Capacity Under Guides
14 "
Throat
8 "
Blade Travel
9  Blade travel into work
Blade Size
3/4 " Width x 8/12T x 10' Length .035 thick (bi-metal)
Guards
Covers 4 step pulleys, blade and lower wheel
Guide Rollers for Blade Width
1/4 ", 3/8 ", 1/2 ", 5/8 " and 3/4 "
Blade Speeds
70, 140, 270 and 525 fpm
Table
Precision ground, cast iron table, 18 1/2 "x 30 "
Table Height 30" from floor
Wheels
Cast iron, 14 " x 1 1/8 "
Wheel Tires
Replaceable rubber
Motor
1 HP, 110/220V, 60-cycle single-phase; 1 HP 220/440V, 60 cycle three-phase
Dimensions
30 " Width x 66 " Height x 40 " Length
Shipping Weight
650 lbs. F.O.B Cleveland, Ohio
Models and Accessories
EF1459 14-1/2 inch VERTICAL BANDSAW / 110 V, 1 PHASE
EF1459A 14-1/2 inch VERTICAL BANDSAW 220V, 1 PHASE
EF1459B 14-1/2 inch VERTICAL BANDSAW 220V, 3 PHASE
EF1459C 14-1/2 inch VERTICAL BANDSAW 440V, 3 PHASE
1A95R CHIP DUST BLOWER
174 FACTORY INSTALLED WORK LIGHT
179 1 inch GUIDE ROLLERS - FOR 1" WIDTH BLADE
1A132 CASTER SET - 4 PCS.
1A49 CONTOUR GUIDE ASSEMBLY
1A192 SAW MASTER ACCESSORY PKG.

 

ROLL-IN SAW EF1459 & SF8590
Vertical All-Purpose Band Saw
Replacement Parts List

Effective January 1, 2011

Please Give Machine Serial Number With Order
Minimum Charge $20.00      Handling Charge $5.00

Call 216-459-9001 for Parts 

PART NO.
DESCRIPTION
1A40
STOP CLAMP, to control depth of cuts
1A41
ANGLE PLATE, graduated block
1A42
C-CLAMP with rod, for angle plate
1A36
UPPER WHEEL - complete with axle, bearings and rubber tire
1A37
LOWER WHEEL - complete with axle, bearings and rubber tire, less 80 tooth spur gear
167
 
BEARING, for upper and lower wheels (2 required per wheel) ea.
1133
 
RUBBER TIRE, for upper and lower wheels (2 required per saw) ea.
1A48
GUIDE ASSEMBLY - complete upper and lower, includes housing, stem, 4 rollers, and 4 bearings
169
 
GUIDE ROLLER BEARING - (4 required per saw) ea.
175
 
3/4" GUIDE ROLLER - for 3/4" maximum blade width (4 required per saw) ea.
179
 
1" GUIDE ROLLER - for 1" maximum blade width (4 required per saw) ea.
162
80 TOOTH SPUR GEAR, for lower wheel
163-A  
24 TOOTH SPUR GEAR, for outer gearbox; short shaft  
170
MOTOR, 1 HP, 60 cycle, single-phase 110V/220V
171
MOTOR, 1 HP, 60 cycle, three-phase 220V/440V
172
MAGNETIC STARTER, single-phase 110V 
172-A
MAGNETIC STARTER, single-phase 220V
173
MAGNETIC STARTER, three-phase 220V 
173-A
MAGNETIC STARTER, three-phase 440V
1125
PULLEY GUARD
1126
PULLEY, 2-3-4-5" step x 5/8" bore for motor
1128
PULLEY, 2-3-4-5" step x 3/4" bore for gearbox
1131
V-BELT- 33" O.D.
132
TABLE, 18 X 30 Blanchard ground
174
WORK LIGHT, - complete
   
LIGHT SHADE, only
1134
HYDRAULIC CYLINDER
1A142
BLADE GUARD
1A33
COUNTERWEIGHT ASSEMBLY
1A164
TENSION ADJUSTMENT HANDLE
1A15O
FLAT TRACK ROLLER, with stud
1A151
GROOVED TRACK ROLLER, with bearing and hex head stud
1A152
GROOVED TRACK ROLLER, with bearing and counterweight stud
154
BLADE, 3/4" x 10T x 9', for SF8590 Model
1X54
BLADE, 3/4" x 10T x 10', for EF1459 Model
1X57
BLADE, 3/4" x 8/12T x 10', for EF1459 Model (bi-metal)
1A95R
CHIP DUST BLOWER
1A132
CASTERS - (set of 4; 2w/locks)
1135
SIDE PANELS-(pair)
1A49
CONTOUR GUIDE ASSEMBLY - complete
1257
 
CONTOUR GUIDE INSERTS, for 3/8" & 1/2" blades pr.
1258
 
CONTOUR GUIDE INSERTS, for 1/4" blades pr.
1A160
CONTOUR GUIDE ASSEMBLY - complete for 3/4" blades
1256
 
CONTOUR GUIDE INSERTS, for 3/4" blades pr.
1A185
RIP FENCE with RAIL
1A189
QUICK CLAMP with BACK PLATES and table plate
6A56
GEARBOX - complete (includes 24 tooth outside gear)
 

 

RISEF1459 mfg. item #: EF1459
$4315.50   msrp $4795.00  
14-1/2 VERTICAL BANDSAW / 110 V, 1 PHASE
lease to own for as little as:$86 per month! 479
Call for freight quote on this item or we will confirm freight charges before shipping.1


RISEF1459A mfg. item #: EF1459A
$4315.50   msrp $4795.00  
14-1/2 VERTICAL BANDSAW 220V, 1 PHASE
lease to own for as little as:$86 per month! 479
Call for freight quote on this item or we will confirm freight charges before shipping.1


RISEF1459B mfg. item #: EF1459B
$4315.50   msrp $4795.00  
14-1/2 VERTICAL BANDSAW 220V, 3 PHASE
lease to own for as little as:$86 per month! 479
Call for freight quote on this item or we will confirm freight charges before shipping.1


RISEF1459C mfg. item #: EF1459C
$4315.50   msrp $4795.00  
14-1/2 VERTICAL BANDSAW 440V, 3 PHASE
lease to own for as little as:$86 per month! 479
Call for freight quote on this item or we will confirm freight charges before shipping.1


RIS1A95R mfg. item #: 1A95R
$76.20   msrp $80.00  
CHIP DUST BLOWER
  479
FREE shipping when ordered with a machine from this manufacturer.20


RIS174 mfg. item #: 174
$79.06   msrp $83.00  
FACTORY INSTALLED WORK LIGHT
  479
FREE shipping when ordered with a machine from this manufacturer.20


RIS179 mfg. item #: 179
$106.68   msrp $112.00  
1 GUIDE ROLLERS - FOR 1 WIDTH BLADE
  479
FREE shipping when ordered with a machine from this manufacturer.20


RIS1A132 mfg. item #: 1A132
$115.25   msrp $121.00  
CASTER SET - 4 PCS.
  479
FREE shipping when ordered with a machine from this manufacturer.20


RIS1A49 mfg. item #: 1A49
$122.87   msrp $129.00  
CONTOUR GUIDE ASSEMBLY
  479
FREE shipping when ordered with a machine from this manufacturer.20


RIS1A192 mfg. item #: 1A192
$376.24   msrp $395.00  
SAW MASTER ACCESSORY PKG.
  479
FREE shipping when ordered with a machine from this manufacturer.20



  • Hours: Monday - Friday
    8:00 AM to 7:00 pm Eastern
  • Toll Free: 1-800-458-3687
    786-866-9865

  • Fax: 865-376-9792
  • American Express American Express American Express
  •  
Copyright © 2014 Smith-Hamilton, Inc
0.006 3607 11:10:52