|
 |
|
SPECIFICATIONS: |
|
CAPACITIES: |
|
Swing Over Bed |
31.5" |
|
Swing Over Cross Slide |
18.9" |
|
Swing Over Gap |
39.4" |
|
Length Of Gap |
39.4" |
|
Center Distance |
200" |
|
HEADSTOCK: |
|
Spindle Speeds‑Number |
18 |
|
Spindle Speeds‑Range |
5.4‑720 RPM |
|
Hole Thru Spindle |
4.09" |
|
Spindle Nose Type |
D1‑11 |
|
GEARBOX: |
|
Threads Per Inch (#) Range |
(26) 1‑14 tpi |
|
Metric Threads (#) Range |
(50) 1‑240 mm |
|
Module Threads (#) Range |
(53) 0.5‑120 mm |
|
Diametral Pitch (#) Range |
(24) 1‑28 |
|
CARRIAGE &
APRON: |
|
Cross Slide Travel |
19.7" |
|
Maximum Travel of Top Slide |
7.9" |
|
Rapid Speed of Carriage |
157"/min |
|
TAILSTOCK: |
|
Travel of Spindle Barrel |
9‑87 |
|
Taper of Center Sleeve |
MT #6 |
|
Taper of Center |
MT #5 |
|
BED: |
|
Width Of Bed |
23.6" |
|
Hardness of Bed (Rockwell C) |
52 |
|
DRIVE &
MOTOR: |
|
Main Drive Motor |
15 HP |
|
Rapid Motor |
1.5 HP |
|
SHIPPING DATA
(W X H X L ON SKID) |
|
W X H X L ON SKID |
6' X 6'6" X 25'4" |
|
SHIPPING WEIGHT/NET WEIGHT |
18,221/15,211 LBS |
|
|
FEATURES:
The bed is
of large width, the side wall of the bed is constructed of
double-rib plates, and internal rib plate consists of
box-type bevel ribs. The rigidity of this type of lathe
increases by up to 1/3 times as compared to other styles.
Load strength is
impressive. A workpiece weighing 6,000 lbs (this rating for
120" Center) can be worked with the chuck only, no steady
rest support. Using one steady rest this can be increased
to 7,000 lbs and using two steady rests or a steady rest and
tailstock support an 8,000 lb workpiece can be turned.
Permissible cutting force (PZ) is 21372N, and (PX) is
7845N. Size/accuracy of machining is up to Grade II.
These lathes
are suitable for general turning such as internal and
external, taper turning, facing, cutting Metric, Inch,
Module, and Diametral threads, and are also used for drawing
oil grooves and keyways.
The forward
and reverse rotation and braking of the spindle are
hydraulically controlled as well as the lubrication of the
headstock and feed box.
Operations
are concentrated. On the Apron is the Rapid 4-Way Control
and this single lever also activates taper cutting through
power to the tool compound (32" only, 25" has a standard
factory installed taper attachment) for short tapers, and
when in concert with longitudinal motion for long tapers.
The
construction and rigidity of transmission are higher than
those of universal lathes. Precision is repeatable and yet
heavy duty cutting can also be obtained. Guideway which is
made of FQ-1" wear-resisting, inlaid materials allow for
smooth and nimble carriage motion and extends the service
life. A lubrication system circulates from the external
independent storage tank which maintains better flow,
cleaner lubricity, and ultimately increases precision as
well as longevity.
Spindle bore
will handle 4" bar stock and the machine is neat,
functional, rugged, easily maintained, well conceived, and
easy to keep clean.
|
ACCESSORIES: |
-
3‑Jaw Chuck (16")
-
4‑Jaw Chuck (24")
-
Follow Rest
-
Lighting System
-
Face Plate
|
-
Steady Rest
-
Coolant System
-
Hand Tools
-
Built in Tapering With Power Top
Slide
-
One Year Parts and Labor Warranty
|
|
