|
This is
a fully geared headstock, gap-bed lathe with precise,
hardened and ground gears, each gear thoroughly tested for
accurate tooth configuration and flank engagement to insure
optimum quietness and smoothness. The drive and brake are
achieved through mechanical multi-disc clutch system. The
precision ground spindle is supported by three tapered
double roller bearings and features D-Cam lock mounting.
The gearbox is totally enclosed and is designed so a
preponderance of standard and metric threads and feeds are
attainable without gear change. The carriage has extended
range, with T-Slots for accommodating special tooling. Nuts
for elimination of backlash are externally adjustable, heavy
duty taper attachment generates tapers of +/- 15 degrees up
to 22 inches. The apron has overload protection. Bed way
is of high grade, alloy cast iron, aged and normalized for
maximum stability, with chrome bearing ways. Heavy cross
ribbing of the bed frame produces extra rigidity and dampens
vibration. Other features include dual spindle control
levers, two-speed tailstock, micro-cutout chuck guard, four
way rapid travel, safety interlock, forced lubricated
head-stock, all which shows that this lathe comes with a
formidable list of desirable features and standard
accessories. |
|
SPECIFICATIONS:
|
|
Swing Over Bed |
19 |
|
Swing Over Carriage |
10
5/8 |
|
Swing in Gap |
27 |
|
Length of Gap |
15
½ |
|
Width of Bed |
14 |
|
Spindle Bore |
4
1/8 |
|
Spindle Type |
D1-8
Cam lock |
|
Spindle Speeds |
12
Choices |
|
Spindle Speed Range |
19,
12-1500 RPM |
|
Cross Slide Travel |
11 |
|
Tool
Slide Travel |
5 ½ |
|
Tailstock Travel |
8 |
|
Tailstock Diameter, Taper |
3,
5MT |
|
Inch
Threads |
58
Kinds, Ύ-92 tpi |
|
Metric Threads |
35
Kinds, 0.25-23mm |
|
Module Threads |
56
Kinds, 0.25-115mm |
|
Diametral Threads |
56
Kinds, 1 ½-184 dp |
|
Longitudinal Feeds |
56
Kinds, 0.0235-2.84 mm/r |
|
Cross Feeds |
56
Kinds, 0.012-1.42 mm/r |
|
Lead
screw |
4
tpi |
|
Main
motor |
10
HP |
|
Coolant, Rapid Motors |
90W |
|
