Wilton 1100R-4 Radial Drill Presses at

Features:

4' Arm Radial Drill Presses
Power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel"giving extra strength and smoothness to high torque loads
The spindle is made of the finest case hardened steel, for extra strength and wear
The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
The spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy
Push button controls are all reduced to 110V
Electrical circuits are located in the built-in control box at the rear of the arm"this keeps the controls dust and humidity free while making them easily accessible for maintenance
Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobs
Arm raising safety device prevents arm from dropping
Counter balanced mechanism for spindle return
12 speeds/3 feed rates make exotic materials easier to drill, bore and tap
Centralized control center
Automatic tool ejector
Independent manual arm clamping system, which locks and unlocks the head and column
Built-in work light
Coolant pump
Tool kit
Box table

Specifications
Model Number	1100R-4
Part Number	1100R-4
Motor	1-1/2 to 3HP, 460V, 3Ph
Number of Spindle speeds	12 (44–1500)
Spindle Taper	4MT
T-Slots Number and Size (in.)	3 & 3/4
Column Diameter (in.)	10-1/4
Drilling Capacity Cast Iron (in.)	2-1/4
Drilling Capacity Mild Steel (in.)	1-3/4
Tapping Capacity Cast Iron (in.)	1-1/4
Tapping Capacity Mild Steel (in.)	1
Boring Capacity Steel (in.)	3-3/8
Boring Capacity Cast Iron (in.)	4-3/4
Distance Column to Spindle (max/in.)	43-5/16
Distance Column to Spindle (min/in.)	9-5/8
Travel of Head Horizontal (in.)	33-3/8
Distance Base to Spindle (max/in.)	50-3/8
Distance Base to Spindle (min/in.)	12-5/8
Arm Travel Vertical (in.)	24
Quill Travel (in.)	9
Quill Travel w/ Powerfeed engaged (in.)	4
Quill Down feed Rates (IPR)	3 (.002, .004, .006)
Elevating Motor	1HP
Base Dimensions (in.)	67-3/4 x 28 x 6-1/2
Coolant Pump Motor	1/8HP
Machine Hieght from Floor (in.)	100
Table Dimensions (in.)	24-3/4 x 20-1/2 x 16-1/2
Net Weight	4290 pound
Overall Dimensions	74 x 34 x 39
Height	89 inch
Width	34 inch
Length	74 inch