Wilton 720R Radial Drill Presses at

Features:

3' Arm Radial Drill Press
The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel"giving extra strength and smoothness to high torque loads
The spindle is made of the finest case hardened steel, for extra strength and wear
The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
The spindle is built to withstand exceptionally heavy drilling and boring loads and ti insure maximum accuracy
Arm raising safety device prevents arm from dropping
Counter balanced mechanism for spindle return
6 speeds/3 feed rates make exotic materials easier to drill, bore and tap
Centralized control center
Automatic tool ejector
Independent arm manual clamping system, which locks and unlocks the head and column
Push button controls are all reduced to 110V
Electrical circuits are located in the built-in control box at the rear of the arm--this keeps the controls dust-and-humidity-free while making them easily accessible for maintenance
Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobs
Built-in work light
Coolant pump
Tool kit
Box table

Specifications
Model Number	720R
Part Number	720R
Motor	3HP, 230/460V, 3Ph, Prewired 230V
Number of Spindle speeds	6 (88–1500)
Spindle Taper	4 MT
T-Slots Number and Size (in.)	3 & 3/4
Column Diameter (in.)	8-1/4
Drilling Capacity Cast Iron (in.)	2
Drilling Capacity Mild Steel (in.)	1-1/2
Tapping Capacity Cast Iron (in.)	1
Tapping Capacity Mild Steel (in.)	3/4
Boring Capacity Steel (in.)	2-3/4
Boring Capacity Cast Iron (in.)	4
Distance Column to Spindle (max/in.)	29-1/2
Distance Column to Spindle (min/in.)	8-5/8
Travel of Head Horizontal (in.)	20-7/8
Distance Base to Spindle (max/in.)	41-3/4
Distance Base to Spindle (min/in.)	9-5/8
Arm Travel Vertical (in.)	23-13/16
Quill Travel (in.)	8-1/4
Quill Down feed Rates (IPR)	.002, .004, .006
Elevating Motor	1HP
Base Dimensions (in.)	23-5/8 x 17-1/2 x 15
Coolant Pump Motor	1/8HP
Machine Hieght from Floor (in.)	85-7/16
Table Dimensions (in.)	23-5/8 x 17-1/2 x 15
Clamping Motor	1HP
Overall Dimensions	64 x 32 x 85
Height	83 inch
Width	64 inch
Length	32 inch