Baileigh BS-210M Bandsaw at Southern Tool Catalog

BS-210M metal cutting band saw
Click on image to enlarge

Baileigh's heavy duty bandsaws are built to the highest standards in the market, for example the BS-210 comes standard with a solid cast iron sawing head allowing for straighter cuts than welded frames. Our band saws have quality Koya taper bearings connected to hardened and ground drive shafts offering further stability. The blade guides employ a hardened roller bearing 1/4 turn devise to straighten out the blade that is further held securely in Tungston carbide guides, assuring very straight and accurate cuts.

General Specifications:

Blade Size is .78" x .035" x 83.071"
Variable Blade Speed is 114' to 262'/min
1.5 HP Motor
Measurements are 45.5"x22.5"x32.5" (W x L x H)
Weight is 344lbs.
Includes Blade Tension Device
Two cutting functions (Manual or Controlled Descent)
Service Requirements: 110 Volt, 60Hz, Single Phase

Capacity:
Cutting Degree	90°	45°	60°
Round	6-3/4"	4-3/4"	2-3/4"
Rectangle	8-1/4" x 6-3/4"
Square	6-3/4"	4-1/2"	2-1/2"

Baileigh's BS-210M is the perfect horizontal band saw when your job requires miter cuts up to sixty degrees. This compact bandsaw requires only 110 volts of power, so it is perfect for small to large machine shops where metal sawing applications under 6-3/4" are required to be cut. Like other Baileigh bandsaws, it comes standard with the ability to manually cut using a trigger switch and handle, or it can be switched over to utilize a hydraulic descent feature normally seen on more expensive models. When using the hydraulic descent feature you can control the descent pressure for perfect cuts and can walk away from the machine that will automatically stop the blade once the metal is finished being cut. A powerful 1-1/2 HP DC motor has the proper torque to drive the direct drive gearbox with no chatter, even at slower cutting speeds that are required when cutting the likes of mild steel. This impressive piece of equipment comes standard with a DC variable speed drive allowing the operator to use the proper speed when cutting different materials like mild steel or aluminum, that increases blade life and cutting speed.

The mitre angle takes seconds to change for increased production in any fabrication or machine shop and offers toolless changeovers. The vise has a rapid advancing handwheel and the vise is locked by a 1/4 turn taper handle that holds the material very secure against the serrated vise plates that further reduce any slippage. Such a vise system increases blade life especially when cutting round material like tubing or pipe. This horizontal band saw has a vise height of 35 inches that reduces operator back fatigue when lifting. The BS-210's single mitering capability allows you to miter from zero to 60 degrees in seconds without any adjustments to the vise. We have employed a very powerful industrial grade coolant pump that lubricates the blade, cools the teeth and blasts away cut chips that extends blade life. A precise liquid filled blade tension gauge extends blade and bearing life offering decades of precision sawing