|
The BS-250M is a single miter band saw capable of cutting
up to 9 inch round metal stock. This mitering bandsaw can cut from zero up to
sixty degree angles. It has a powerful 2 HP DC motor that delivers high torque
even at slower speeds, ensuring no chattering of the blade, extending blade
life. This horizontal metal cutting band saw has a direct drive gear box,
meaning there are no pulleys or belts, so your blade will last longer with such
a positive drive. The BS-250M has a DC variable speed drive for speeds from 114
to 262 feet allowing the operator to precisely adjust the speed for the proper
blade and material, again increasing the life of the blade and decreasing
cutting rates. Like all Baileigh bandsaws this one includes a powerful
industrial grade coolant pump that washes away chips before and after the
cutting area. This cools the blade teeth, lubricates the blade, and removes the
metal chips from the blade.The BS-250 band saw cuts using the pull down
arm and trigger switch to activate the blade and coolant, or if your in more of
a production run, you can switch the machine over to cut metal using the
hydraulic descent feature that will cut through the metal using the pressure you
determine and will shut down the blade and coolant when completed. |
To change the miter
angle takes seconds considering the change uses no tools and there are no
alterations needed to the vise position. The BS-250 comes standard with a stop
gauge in inches and millimeters. The vise can quickly be positioned via hand
wheel and ultimately locked into position on the piece of material using a 1/4
turn taper lock coupled to the serrated clamps to assure no movement to the
material being cut, this ultimately will increase blade life. The cabinet allows
for a back friendly height of 35 inches and uses as little floor space as
possible. Best of all this horizontal band saw requires a 110 volts of power,
meaning it can work in any facility in North America that has power. Perfect for
small to large metal cutting machine shops and metal fabricating shops |
