| The gear driven
BS-260SA is a 9" dual miter Band Saw and is the perfect saw
for cutting at 90 degrees or miter angles. This saw has a
dual angle head capable of cutting 0-60 degrees (R) and 0-45
(L), making it one of the most versatile saws on the market.
Quick releases allow the operator to change the miter angle
in seconds. The vise clamp uses a handwheel coupled to a low
ratio acme screw for positioning and a quick release and
load hydraulic clamping system. Each semi-automatic gear
driven metal cutting band saw we offer has variable speed,
miter heads, hydraulic vise, and semi automatic downfeed and
up feed for perfect feeds and longer blade life. Our band
saws are constructed of a heavy cast iron saw head and base
and the blades are guided via a tungsten carbide insert
offering rigidity and accuracy. Each band saw has a powerful
coolant system and a broken blade tensioning devise that
shuts down the machine if the blade breaks. |
The hydraulic
descent has a down feed adjustment for feed pressure. The
saw head is automatically lifted when the cut is complete
and is ready for the next cut. This metal bandsaw can cut up
to 8" x 9-1/2" rectangle. These models have service
requirements of 220V, Single Phase, 60 Hertz. The BS-260-SA
horizontal bandsaw has a dual swiveling miter head, allowing
the operator to miter 60 degrees in one direction and 45
degrees in the other direction. This series of horizontal
band saw comes standard with a variable speed drive allowing
the operator to fine tune the blade speed from 114' to 262'
/ min. The SA metal cutting saw series requires a 1" wide
saw blade by .035" wall thickness, making this series a very
precise semi-automatic miter saw. Baileigh Industrial
provides quality mitering bandsaws at an exceptional value.
Baileigh keeps this machine as well as all other machines in
stock for same day shipments. |
