CONSTRUCTION - The Frame is made of high tension
strength stress relieved steel plate and rigidly
bolted/welded to manufacture strong/u-transform machine
body. 2.
WIDE GUIDEWAY - To ensure the movement of the guideblock
more smoothly and stable for high accuracy.
MECHANICAL PARALLEL DEVICE - The compulsory
synchronization of the mechanical structure to ensure
the top die and bottom die fully parallel at any
position of stroke movement.
HYDRAULIC OIL TANK & PUMP - A large tank allows the ail
to run smoothly and efficiently. The high-efficiency,
low-noise pump improves the quality of the working
environment.
STROKE - Depth positioning by accurate mechanical stops
inside the cylinder t ensure every bending to the same
angle. Adjustable strokes shorten machine time.
SAFETY FOOT CONTROL - Removable foot control pedal with
safety protection. The upper die beam is raised back to
the top position immediately upon the operator removing
his foot from the pedal.
HYDRAULIC SYSTEM - High-efficient hydraulic circulation
system, quality solenoids and two powerful cylinders
provide maximum and stable output to execute excellent
performance. Ram downward by two=step speed, fast-speed
approaching and slow -speed press bending to shorten the
circulation time. Easy setting work pressure by stepless
regulator with overload protection device to provide a
proper pressure.
SINGLE-SIDE MICRO ADJUSTMENT - Two micro-fine adjusting
bending angles, this device provides two directional
adjustments, increase or decrease bending angle(s), to
achieve uniform angle on both ends of the bent workpeice.
DIES - One-piece upper forming punch. One-piece 4-way
bottom lower die. Multi-size V-slot design to meet most
bending applications.
POWER BACK GAUGE - Motorized precision ballscrew type
back gauge with readout display and micro adjustor.
Resolution 0.004".
Hydraulic bottom die angle compensation.
Power bending angle setup.
Jog, single and auto bending modes.
STANDARD
EQUIPMENT
24" or 32" ballscrew back gauge with digital counter
display and front control (optional for 22/33/38/50 ton
model).
24" front operated manual ballscrew back gauge with
digital counter and micro adjustor (22/33/38/50 ton
models).
24" (2) front support arms
Powered benging angle setting device (opt: 22/33/38/50
ton models).
Hydraulic bottom-die angle compensation (opt:
22/33/38/50 ton models).
One top die and one 4-way bottom die (6Vs for 66ton and
over, single V for 50tons and lower).
Control panel with all switch low voltage wired
Removable foot pedal with safety protection housing.
Safety sensor protection system.
Tool box with maintenance tools and leveling pads.
OPTIONAL
ACCESSORIES
24" Power ballscrew back gauge with digital counter
display and front control (optional for 22/33/38/50 ton
models only).
Powered bending angle setting device (22/33/38/50 ton
models).
Hydraulic bottom-die angle compensation (opt:
22/33/38/50 ton models).