|
 SERIES
5124
Portable
Davit Cranes
Hand or Power Winch Operation
Up to 2000 lb capacity
Quick
Disconnect Anchor for quickly attaching or removing the wire
rope from the winch drum.
Corrosion Resistant Finish with
electrostatic powder coating. Galvanized finish also available, see
models ending in GAL.
Stainless Steel models for long
service life in corrosive environments, with spur gear, worm gear,
or stainless steel hand winch.
Adjustable Boom telescopes to 4
different lengths, and adjusts in height while under load with
ratchet style screw-jack.
Two Part Line Kit improves load rating
performance with mechanical advantage of two part rigging. See model
5124TPL.
|
Model 5124
|
Hand Winch Operated Models include
spur gear or worm gear hand winch with brake for load control.
The worm gear hand winch on models 5124M2 and
5124M2GAL only, can be power driven with a maximum 400 rpm
drill-motor, see model ED120BD.
Power Winch Operated Models include
115 volt 1 phase AC electric winch with pendant control and brake.
Other voltages and phases, 12 volt DC, pneumatic, and hydraulic
available, contact factory.
Crane Rotates 360° on a pin and
sleeve bearing in the base. Handle on the boom makes rotation easy.
Bases sold separately in pedestal,
socket, or wall mount style. See models starting with 524.
Wire
Rope Assemblies sold separately.
|
|
Series 5124 Crane
Configurations |
| Model |
Description |
Approx. Ship Wt. |
| 5124M1 |
up to 2000 lb – with M4311PB-K spur gear hand winch |
300 lb |
| 5124M1GAL |
up to 2000 lb – with M4311PB-K spur gear hand
winch – galvanized finish (on crane only) |
300 lb |
| 5124M1SSA |
up to 2000 lb – with M4311PBSS-K spur gear hand winch –
stainless steel (winch and crane) |
300 lb |
| 5124M1SSB |
up to 2000 lb – with M4311PB-K spur gear hand
winch – stainless steel (crane only) |
300 lb |
| 5124M2 |
up to 2000 lb – with 4WM2-K worm gear hand winch |
315 lb |
| 5124M2GAL |
up to 2000 lb – with 4WM2-K worm gear hand winch
– galvanized finish (on crane only) |
315 lb |
| 5124M2SS |
up to 2000 lb – with 4WM2-K worm gear hand winch – stainless
steel (crane only) |
315 lb |
| 5124E2 |
up to 2000 lb – with 4WP2-K electric winch –
115 VAC, 1 phase, 6 ft pendant control |
355 lb |
| 5124E4 |
up to 2000 lb – with 4777-K electric winch – 115 VAC, 1 phase, 6
ft pendant control |
365 lb |
| 5124E4DC |
up to 2000 lb – with 4777DC-K electric winch –
12 volt DC, 10 ft pendant control
(other configurations available, please contact factory) |
377 lb |
|
|
Series 5124 Crane Bases and Accessories |
| Model |
Description |
Approx. Ship Wt. |
| 524 |
pedestal base (upright mount) |
67 lb |
| 524GAL |
pedestal base (upright mount) – galvanized
finish |
67 lb |
| 524SS |
pedestal base (upright mount) – stainless steel |
67 lb |
| 524F |
socket base (flush mount) |
55 lb |
| 524FGAL |
socket base (flush mount) – galvanized finish |
55 lb |
| 524SSF |
socket base (flush mount) – stainless steel |
55 lb |
| 524W |
wall mount base |
80 lb |
| 524WGAL |
wall mount base – galvanized finish |
80 lb |
| 524SSW |
wall mount base – stainless steel |
80 lb |
| 5124TPL |
"two part line kit – includes turn around
sheave block with hook, swivel anchor, and fasteners" |
7 lb |
| 5124SJH |
handle extension – for ratchet style screw-jack |
7 lb |
| ED120BD |
for 5124M2 and 5124M2GAL only
electric 400 rpm drill-motor – 120 VAC with 1-1/8” hex socket |
12 lb |
| Optional |
wire
rope assemblies, base covers, wire rope keepers, boom chain hook |
|
Important: It is the owner's or
operator's responsibility to determine the suitability of the equipment
to its intended use. Study all applicable codes, manuals, and
regulations. Be sure to read the Owner's Manual supplied with the
equipment before operating it.
|
|
