Features and Benefits
- No water needed - eliminate the mess associated with drilling wet.
No water to find, contain, or clean up.
- No expensive core rigs - No need for high priced core drilling
machines. The Cobra is used on 1/2" drills, and hammer drills capable of
running at 2500 rpm.
- No long setup time - Plug in, you drill and go to work. Save all of
the hassle normally associated with drilling. Between setup, drilling,
and cleanup, a normal job can take as long as 20 to 40 minutes per hole.
- Interchangeable center pin and shank - The Cobra uses the same
drilling accessories between all sizes for further convenience.
- Drills reinforced concrete - The cobra is capable of drilling up to
6000 PSI cured concrete with up to 1" rebar.
- Deeper Drilling depth - Almost twice the depth of a carbide core
drill, the Cobra will give you 6" or 10" depending on bit length.
- Use on 1/2" hammer drill.
- Drill where no standard dry diamond or carbide core bit will -
Conventional dry diamond core bits will drill brick and block, not
reinforced concrete. Carbide core bits will drill concrete without steel
reinforcement and usually limit you to about 3 1/2" of drilling depth
|
6 inch drilling depth COBRA dry diamond core bits.
6 inch Drilling Depth
6 inch drilling depth COBRA dry diamond core bits.
Compatible Drills:
Milwaulkee - 1/2" hammer - 5370-6, 5374-1, 5375-1, 5376-1, 5377-6,
5378-20
Metabo
1/2" drill - 703
1/2" hammer drill - 655, 751, SBE13R, SBE600RL
Bosch
1/2" drill - 1169VSR
1/2" hammer drill - 1141VSR, 1194VSR
Dewalt - 1/2" hammer drill - DW505, DW515
B&D D - 1/2" hammer drill - DR700
Porter Cable - 1/2" hammer drill - 7751
Makita - 1/2" hammer drill - NHP 1310
Hilti
1/2" hammer drill - TM7SII
1" SDS rotary hammer - TE18ME
![[]](http://www.diamondbackblades.com/images/spacer.gif) |
|
6 in. Drilling Depth |
| Model |
Description |
| 1CBD |
1" (32mm) Cobra
Dry Bit Set |
| 1CDBBO |
1" (32mm) Cobra
Dry Bit Only |
| 112CDB |
1 1/2" (40mm)
Cobra Dry Bit Set |
| 112CDBBO |
1 1/2" (40mm)
Cobra Dry Bit Only |
| 2CDB |
2" (52mm) Cobra
Dry Bit Set |
| 2CDBBO |
2" (52mm) Cobra
Dry Bit Only |
| 212CDB |
2 1/2" (65mm)
Cobra Dry Bit Set |
| 212CDBBO |
2 1/2" (65mm)
Cobra Dry Bit Only |
| 3CDB |
3" (80mm) Cobra
Dry Bit Set |
| 3CDBBO |
3" (80mm) Cobra
Dry Bit Only |
| 4CDB |
4" (100mm) Cobra
Dry Bit Set |
| 4CDBBO |
4" (100mm) Cobra
Dry Bit Only |
| 434CDB |
4 3/4" (120mm)
Cobra Dry Bit Set |
| CCP |
Replacement center
pin (6" length) |
| CHS |
Replacement Hex
shank |
| CHS12 |
12" extension
(with shank) |
|
10 inch Drilling Depth
10 inch drilling depth COBRA dry diamond core bits.
Compatible Drills:
Metabo - 1/2" hammer drill - 1010HD
|
|
10 in. Drilling Depth |
| Model |
Description |
| 1CDBL |
1" (32mm) x 10"
Cobra Dry Bit Set |
| 1CDBLBO |
1" (32mm) x 10"
Cobra Dry Bit Only |
| 112CDBL |
1 1/2" (40mm) x
10" Cobra Dry Bit Set |
| 112CDBLBO |
1 1/2" (40mm) x
10" Cobra Dry Bit Only |
| 2CDBL |
2" (52mm) x 10"
Cobra Dry Bit Set |
| 2CDBLBO |
2" (52mm) x 10"
Cobra Dry Bit Only |
| 212CDBL |
2 1/2" (65mm) x
10" Cobra Dry Bit Set |
| 212CDBLBO |
2 1/2" (65mm) x
10" Cobra Dry Bit Only |
| 3CDBL |
3" (80mm) x 10"
Cobra Dry Bit Set |
| 3CDBLBO |
3" (80mm) x 10"
Cobra Dry Bit Only |
| 4CDBL |
4" (100mm) x 10"
Cobra Dry Bit Set |
| 4CDBLBO |
4" (100mm) x 10"
Cobra Dry Bit Only |
| 434CDBL |
4 3/4" (120mm) x
10" Cobra Dry Bit Set |
| 5CDBLBO |
5" (130mm) x 10"
Cobra Dry Bit Only |
| CCPL |
Replacement center
pin (10" length) |
|
Accessories for COBRA dry diamond core bits.
|
|
Accessories |
| Model |
Description |
| CHS |
Replacement Hex
shank (all) |
| 1RPS |
1" Rubber Pin
Support |
| 112RPS |
1 1/2" Rubber Pin
Support |
| 2RPS |
2" Rubber Pin
Support |
| 212RPS |
2 1/2" Rubber Pin
Support |
| 3RPS |
3" Rubber Pin
Support |
| 4RPS |
4" Rubber Pin
Support |
| 434RPS |
4 3/4" Rubber Pin
Support |
|
|
