chat now with southern tool
Chat Now!
Call 1-800-458-3687
Monday - Friday 8:00 AM- 7:00 PM ET

 

Save 10% on Select  jet metalworking machinery logo Metalworking Machines
Free Freight on ALL
Jet and Wilton Metalworking and Metalforming Machines.

Edwards 100 Ton IV Ironworker

 

 

ironworker

edwards logo

Standard features include a Punch Assembly, a 14" wide Flat Bar Shear, a high capacity Angle Shear and a universal open tooling station designed for optional Tooling Accessories allowing you to select the perfect tool for your needs.

The Workhorse

  • Four Available Workstations
  • High Capacity Angle Shear
  • Universal Open Tooling Station
  • Electric Stroke Control Standard

If you're looking for versatility and power, the Edwards 100 Ton Ironworker is perfect for your shop. Standard features include a Punch Assembly, a 14 inch wide Flat Bar Shear, a high capacity (6 x 6 x 1/2 inch) Angle Shear and a universal open tooling station designed for optional Tooling Accessories allowing you to select the perfect tool for your needs.

The optional Hydraulic Accessory Pack allows your Ironworker to act as a power source to our expanding line of innovative Hydraulic Accessory Tools, such as the 10 Ton Tube/Pipe Bender, 20 Ton Shop Press, and 40 Ton Shop Press.

Shown with optional 12 inch Brake tooling.

edwards/edwrd_pnchdie_sm.jpg

Limited Offer FREE: Punch & Die Starter Box-8 Sets: 3/16,5/16,7/16,9/16,11/16,13/16,15/16,1 1/16" 
 (VALUE $303.00)

 

PUNCH
RATED TONNAGE 100T
MAX. CAPACITY 1-1/16 inch dia. in 1 inch A36 (65,000 PSI Tensile)
STROKE 1-13/16 inch
THROAT DEPTH 11 inch
OPEN HEIGHT 8-3/4 inch
SHUT HEIGHT 6-15/16 inch
WORK HEIGHT 39-1/16 inch
FLAT BAR SHEAR
MAX. CAPACITY 3/4 x 14 inch
1 x 10 inch
MAX. ROUND CAPACITY 1-1/4 inch
MAX. SQUARE CAPACITY 1-1/4 inch
WORK HEIGHT 37 inch
ANGLE SHEAR
MAX. SIZE 6 x 6 x 1/2 inch
WORK HEIGHT 43-7/8 inch
OPTIONAL COPER NOTCHER
Max. Capacity 2-1/2 x 6 x 1/2 inch
Work Height 42 inch
OPEN STATION
THROAT DEPTH 14-3/4 inch
OPEN HEIGHT 8-3/4 inch
SHUT HEIGHT 6-3/4 inch
STROKE 1-13/16 inch
WORK HEIGHT 37 inch
GENERAL SPECIFICATIONS
STANDARD MOTOR 7.5 HP 3 Phase 208/240v 1765 RPM 21 AMP
OPTIONAL MOTORS 7.5 HP 3 Phase 440/480v 1765 RPM 12 AMP

7.5 HP 3 Phase 575v 1770 RPM 8 AMP

5 HP 1 Phase 208/240v 1725 RPM 26 AMP

*7.5 HP 1 Phase 208/240v 1765 RPM 36 AMP
*Required for 1 Ph Hydraulic Accessory Pack
HYDRAULIC PUMP 10-1/2 GPM - 2 STAGE
VALVE PRESSURE 3500 PSI
RESERVOIR 17 GALLONS
CYLINDER 3-1/2 inch Ram
DIMENSIONS
HEIGHT 61-11/16 inch
WIDTH 56-1/8 inch
DEPTH 45 inch
SHIPPING WEIGHT 4650 lb

100 Ton Spec

Click to View Spec Sheet

EDWARDS 100 TON IRON WORKER
IW100-1PH230 100 Ton Ironworker  1PH/220V
FREE - 8 Pc  Punch & Die (EDWE08-00) Retail Value of $303.00
IW100-3PH208 100 Ton Ironworker  3PH/208V
FREE - 8 Pc  Punch & Die (EDWE08-00) Retail Value of $303.00
IW100-3PH230 100 Ton Ironworker  3PH/220V
FREE - 8 Pc  Punch & Die (EDWE08-00) Retail Value of $303.00
IW100-3PH460 100 Ton Ironworker  3PH/460V
FREE - 8 Pc  Punch & Die (EDWE08-00) Retail Value of $303.00
IW100-3PH575 100 Ton Ironworker  3PH/575V
FREE - 8 Pc  Punch & Die (EDWE08-00) Retail Value of $303.00
100 Ton Edward's IronWorker Accessories
E08-00 Punch & Die Starter Box-8 Sets: 3/16,5/16,7/16,9/16,11/16,13/16,15/16,1 1/16"
0900-KIT-HD AC0900-KIT-HD -  Heavy Duty Gauging Table Kit - 1" x 12" x 16" with 1" x 6" x 10" support plate - includes 1 short & 1 long fence, standard to 1 - 1/16"
0900-KIT-HD-OHD AC0900-KIT-HD-OHD -  Oversize Heavy Duty Gauging Table Kit - 1" x 12" x 16" with 1" x 6" x 10" support plate - includes 1 short & 1 long fence, oversize to 1-9/16"
0900-01 AC0900-01 -  Fence (short) - 2 handles
0900-02 AC0900-02 -  Fence (long) - 2 handles
1098 AC1098 -  Coper-Notcher for the 100 Ton JAWS IV, ELITE 68 & ELITE 110 TON  Iron Workers ** 
0125-31 AC0125-31 -  "Vee Notches-3" x 3" x 1/4" (ANGLE NOTCHER)
0925-00 AC0925-00 -  Pipe Notcher Housing for Schedule 40 Pipe - 1/2" thru 2" ** Dies Sold Seperatly - SEE BELOW **
1044 AC1044 -  Pipe Notching Dies - 1/2" (sched 40) ** Call for availability of dies for schedule 80 pipe and special tubing
1045 AC1045 -  Pipe Notching Dies - 3/4" (sched 40) ** Call for availability of dies for schedule 80 pipe and special tubing
1046 AC1046 -  Pipe Notching Dies - 1" (sched 40) ** Call for availability of dies for schedule 80 pipe and special tubing
1047 AC1047 -  Pipe Notching Dies - 1-1/4" (sched 40) ** Call for availability of dies for schedule 80 pipe and special tubing
1048 AC1048 -  Pipe Notching Dies - 1-1/2" (sched 40) ** Call for availability of dies for schedule 80 pipe and special tubing
1049 AC1049 -  Pipe Notching Dies - 2" (sched 40) ** Call for availability of dies for schedule 80 pipe and special tubing
CL1000 AL1000 -  Super Bright LCD Accessory Light
1035 AC1035 -  12" Brake w/4-way Die-1/16", 1/8",3/16",1/4" 10" (for use with the 75 & 100 Ton JAWS IV Ironworker
1011 AC1011 -  Manual Back Gauge - up to 48"
48AC AC48AC -  48" AUTO CUT FOR PRODUCTION CUTTING
1017 AC1017 -  Fabricators Protractor
0895-01 AC0895-01 -  Oversize Pedestal Die Table - Oversize to 1-9/16"
1024 AC1024 -  Oversize Punch Assembly (1024) - For 25 to 100T units
1055 AC1055 -  241 Punch Assembly (1055) For Round Punch & Dies 1" - 4" 
1075 AC1075 -  MULTI SHEAR
0858-01 AC0858-01 -  "Rod Shear and Housing-1/4",3/8",1/2",5/8",3/4",1"
1099 AC1099 -  Urethane Stripper Assembly
0895-00 AC0895-00 -  Pedestal Die Table - Standard to 1-1/16"
0127-02 AC0127-02 -  Greaseless Slides
FACTORY Installed Hydraulic Power Packs (Required for Bender, H-Frame Press and Other Externatl Hydraulic Equipment)
AC600/AC700 Factory Installed Hydraulic Accessory Pack Available on new machines only 65, 75 & 100 Ton ModelS Only. (NOT FOR 100 TON DELUXE MODEL) 

 

Please Call 800-458-3687 To Place an Order for items listed Below!
Special Order Items! Delivers usually Ground UPS in 1 Week
S T A N D A R D  P U N C H E S  and  D I E S
Punch and Die Starter Box - #E08-00 (8 sets: 3/16 to 1-1/16 inch) E08-00
Hex Punch and Die up to 29/32 inch Set: one punch, one die HP/D
Oblong Punch and Die up to 1-1/16 inch Set: one punch, one die KOP/D
Rectangular Punch and Die up to 5/8 x 7/8 inch Set: one punch, one die RP/D
Round Punch and Die up to 1-1/16 inch Set: one punch, one die P/D
Square Punch and Die up to 3/4 inch Set: one punch, one die SQP/D
O V E R S I Z E   P U N C H E S  and  D I E S
Round Punch and Die up to 1-9/16 inch Set: one punch, one die OSP/D
Square Punch and Die up to 1-1/16 inch Set: one punch, one die OSSQP/D
Oblong Punch and Die up to 1-9/16 inch Set: one punch, one die OSKOP/D
Hex Punch and Die up to 1-1/4 inch Set: one punch, one die OSHP/D
2 4 1   P U N C H E S  and  D I E S
241 Round Punch and Die 1  to  2 inch Set: one punch, one die 241P/D
241 Round Punch and Die 2-1/32 to 2-1/2 inch Set: one punch, one die 241P/DA
241 Round Punch and Die 2-17/32 to 3 inch Set: one punch, one die 241P/DB
241 Round Punch and Die 3-1/32 to 3-1/2 inch Set: one punch, one die 241P/DC
241 Round Punch and Die 3-17/32 to 4 inch Set: one punch, one die 241P/DE

NOTES:

All punch & die sets are available in 1/32 inch increments and are
shipped with a 1/32 inch die clearance unless otherwise noted.

Refer to punch & die list for all other shapes and sizes.

All shaped punches are shipped with keyway and drill spots.

Prices subject to change without notice.

Custom Punch and Dies are available.
Punches and Dies
Standard ROUND Oversize ROUND Metric ROUND
Punch Die Punch Die Punch Die
1/8 inch 5/32 inch 1 inch 1-1/32 inch 4mm 4.8mm
5/32 inch 3/16 inch 1-1/32 inch 1-1/16 inch 5mm 5.8mm
3/16 inch 7/32 inch 1-1/16 inch 1-3/32 inch 6mm 6.8mm
7/32 inch 1/4 inch 1-3/32 inch 1-1/8 inch 7mm 7.8mm
1/4 inch 9/32 inch 1-1/8 inch 1-5/32 inch 8mm 8.8mm
9/32 inch 5/16 inch 1-5/32 inch 1-3/16 inch 9mm 9.8mm
5/16 inch 11/32 inch 1-3/16 inch 1-7/32 inch 10mm 10.8mm
11/32 inch 3/8 inch 1-7/32 inch 1-1/4 inch 11mm 11.8mm
3/8 inch 13/32 inch 1-1/4 inch 1-9/32 inch 12mm 12.8mm
13/32 inch 7/16 inch 1-9/32 inch 1-5/16 inch 13mm 13.8mm
7/16 inch 15/32 inch 1-5/16 inch 1-11/32 inch 14mm 14.8mm
15/32 inch 1/2 inch 1-11/32 inch 1-3/8 inch 15mm 15.8mm
1/2 inch 17/32 inch 1-3/8 inch 1-13/32 inch 16mm 16.8mm
17/32 inch 9/16 inch 1-13/32 inch 1-7/16 inch 16.5mm 17.3mm
9/16 inch 19/32 inch 1-7/16 inch 1-15/32 inch 17mm 17.8mm
19/32 inch 5/8 inch 1-15/32 inch 1-1/2 inch 18mm 18.8mm
5/8 inch 21/32 inch 1-1/2 inch 1-17/32 inch 19mm 19.8mm
21/32 inch 11/16 inch 1-17/32 inch 1-9/16 inch 20mm 20.8mm
11/16 inch 23/32 inch 1-9/16 inch 1-19/32 inch 20.5mm 21.3mm
23/32 inch 3/4 inch Standard OBLONG 21mm 21.8mm
3/4 inch 25/32 inch Punch Die 22mm 22.8mm
25/32 inch 13/16 inch 1/4x1/2 inch 9/32x17/32 in 23mm 23.8mm
13/16 inch 27/32 inch 9/32x9/16 inch 5/16x19/32 in 24mm 24.8mm
27/32 inch 7/8 inch 3/16x3/4 inch 7/32x25/32 in 24.5mm 25.3mm
7/8 inch 29/32 inch 1/4x3/4 inch 9/32x25/32 in 25mm 25.8mm
29/32 inch 15/16 inch 5/16x3/4 inch 11/32x25/32 in 26mm 26.8mm
15/16 inch 31-32 inch 7/16x3/4 inch 15/32x25/32 in Standard SQUARE
31/32 inch 1 inch 9/16x3/4 inch 19/32x25/32 in Punch Die
1 inch 1-1/32 inch 3/8x3/4 inch 13/32x25/32 in 1/4 inch 9/32 inch
1-1/32 inch 1-1/16 inch 1/2x3/4 inch 13/32x25/32 in 5/16 inch 11/32 inch
1-1/16 inch 1-3/32 inch 13/32x13/16 inch 7/16x27/32 in 11/32 inch 3/8 inch
 Standard HEX 3/16x1 inch 7/32x1-1-3/32 in 3/8 inch 13/32 inch
Punch Die 1/4x1 inch 9/32x1-1-3/32 in 13/32 inch 7/16 inch
3/8 inch 13/32 inch 9/32x1 inch 5/16x1-1-3/32 in 7/16 inch 15/32 inch
7/16 inch 15/32 inch 5/16x1 inch 11/32x1-1-3/32 in 15/32 inch 1/2 inch
15/32 inch 1/2 inch 11/32x1 inch 3/8x1-1-3/32 in 1/2 inch 17/32 inch
1/2 inch 17/32 inch 3/8x1 inch 13/32x1-1-3/32 in 17/32 inch 9/16 inch
17/32 inch 9/16 inch 13/32x1 inch 7/16x1-1-3/32 in 9/16 inch 19/32 inch
9/16 inch 19/32 inch 7/16x1 inch 15/32x1-1-3/32 in 19/32 inch 5/8 inch
19/32 inch 5/8 inch 1/2x1 inch 17/32x1-1-3/32 in 5/8 inch 21/32 inch
5/8 inch 21/32 inch 17/32x1 inch 9/16x1-1-3/32 in 21/32 inch 11/16 inch
11/16 inch 23/32 inch 9/16x1 inch 19/32x1-1-3/32 in 11/16 inch 23/32 inch
23/32 inch 3/4 inch 5/8x1 inch 21/32x1-1-3/32 in 12/32 inch 3/4 inch
3/4 inch 25/32 inch 11/16x1 inch 23/32x1-1-3/32 in 3/4 inch 25/32 inch
25/32 inch 13/16 inch 3/4x1 inch 25/32x1-1-3/32 in ** 25/32 inch 16/16 inch
  13/16x1 inch 27/32x1-1-3/32 in ** 13/16 inch 27/32 inch
5/16x1-1/16 in 11/32x1-1-3/32 in Part number 0222-02
Notched Coupling Nut Required
3/8x1-1/16 in 13/32x1-1-3/32 in
9/16x1-1/16 in 19/32x1-1-3/32 in  
11/16x1-1/16 in 23/32x1-1-3/32 in
13/16x1-1/16 in 27/32x1-1-3/32 in

 

Click On Any Picture Below for Larger View

punch die starter set

Punch / Die Starter Set

Get started with the basics!

Selected to accomodate some of the most commonly used bolts, our Punch/Die Starter Set includes 8 standard round punch and die sets with 1/32 inch clearance. Sized in 1/8 inch increments from 3/16 to 1-1/16 inch and organized in a handy steel box, these are a must-have.

Customize your set - choose any eight of our standard round punch and die sets to fit your needs.

gauging table kit

Gauging Table Kit - Precision Punching

Add precision and speed to your repeated punching projects with our 3/8 inch thick Gauging Table Kit. The large 12 x 16 inch table bolts to standard or oversize Pedestal Die Tables. The included adjustable fences and handles clamp down with heavy-duty hardware to guide your material to the same punch location every time. Custom table size and additional fences available.

heavy duty gauging table kit

Heavy Duty Gauging Table Kit - Heavy Duty Precision

Available in standard and oversize, the robust 1 x 12 x 16 inch Heavy Duty Gauging Table Kit takes the guesswork out of making precise, repeatable standard or oversize holes. Movable fences clamp down to the table surface with heavy-duty hardware to guide your material to the same punch location every time. The kit includes heavy duty table, mounting plate, hardware and one short and one long movable fence.

  • Standard up to 1-1/16 inch round
  • Oversize up to 1-9/16 inch round
coper notcher

Coper Notcher - Notch with Versatility

Coper Notcher tooling, also known as a Nibbler, creates anything from a small nibble to a large notch out of plate or angle. Our three sizes of Coper Notchers are designed to uniquely maximize the capacity and utility of each Ironworker. When versatility is key, our Coper Notcher is indispensable.

The Coper Notcher is standard on 50 Ton, 60 Ton, 65 Ton, 75 Ton, 100 Ton Deluxe, 120 Ton and ELITE 110|65 Ironworkers. See your machine specifications for details.

Order the Coper Notcher as an optional tooling accessory on the 25 Ton, 40 Ton, 55 Ton, 100 Ton, ELITE 68 and ELITE 110 Ironworkers. ** All Other Models the Coper Notcher is a STANDARD EQUIPMENT

  • 25 Ton, 40 Ton, 55 Ton
  • 100 Ton, ELITE 68, ELITE 110
angle notcher

Angle Notcher - V Notcher

Efficiently Work Angle Iron

The Angle Notcher takes a precise 92 degrees notch from the bottom leg of angle up to 3 x 3 x 1/4 inch profiles. Bend 90 degrees and quick and clean youre on your way to building a steel frame.

pipe notcher

Pipe Notcher - A Quick, Clean, Time-Saving Tool

The Edwards Pipe Notcher eliminates hours of cutting and grinding required for clean saddle joint connections. Simply place your pipe into the bump-die housing and cut a perfect saddle each and every time. Contact  us for Schedule 80, tube dies and custom dies.

  • Pipe Notcher Housing
  • Pipe Notcher Housing - 65 Ton, 120 Ton, ELITE 110|65
  • 1/2 inch Die (Sched. 40)
  • 3/4 inch Die (Sched. 40)
  • 1 inch Die (Sched. 40)
  • 1-1/4 inch Die (Sched. 40)
  • 1-1/2 inch Die (Sched. 40)
  • 2 inch Die (Sched. 40)
turret pipe notcher

Turrent Pipe Notcher - Multiple Sizes... No Problem!

The Edwards Turret Pipe Notcher Housing allows you to load your favorite pipe dies into the carousel and quickly switch from one die size to the next. Designed with a centering detent, the Turret Pipe Notch tooling eliminates the cutting and grinding required for your saddle joint connections in Schedule-40 pipe. Simply insert your mild-steel or aluminum pipe into the bump-die housing, activate the machine and cut a perfect saddle without any additional finishing work.

  • 1/2 inch Die (Sched. 40)
  • 3/4 inch Die (Sched. 40)
  • 1 inch Die (Sched. 40)
  • 1-1/4 inch Die (Sched. 40)
  • 1-1/2 inch Die (Sched. 40)
  • 2 inch Die (Sched. 40)
ACCESSORY LIGHT

Assessory Light - Can you see the light?!

Designed with m12 connections, this super bright LED light plugs in to late model Edwards Ironworkers and has a 100,000 hour rating. Super durable lexan lens and magnetic base allow you to attach the light on any Ironworker surface.

Accessory work lights contain magnets - Magnet Safety Warning!

Disclaimer: Edwards Manufacturing neither assumes nor accepts any liability for damages resulting from the handling or use of magnets. With your purchase, the buyer confirms that you have read and understood the following warnings, the buyer agrees that he/she is responsible for all damages and injuries caused by magnets, which may include personal injuries, property and magnet damages.

brake tooling

Press Brake - Precise, Repeatable Bends

Brackets, frames, pans and tanks are just a few of the applications appropriate for the Edwards Brake Tooling. Available in 7, 8, 10 and 12 inch lengths (length varies by machine), Brake Tooling includes a standard punch and a four-way die that allows for 1/16, 1/8, 3/16 and 1/4 inch material to be broke to a 90 degree angle. The bottom brake die is held with brackets that easily bolt to the mounting table. Repeatable bending is achievable with the combination of Brake Tooling and the Ironworker's electric stroke control.

48 inch back gauge

Manual Back Gauge - 48 inch Back Gauge - Set Your Stop

Fitted to the back of the Ironworker, the 48 inch Back Gauge accessory provides an adjustable stop for the Angle Shear and Flat Bar Shear stations of your Edwards Ironworker. The sturdy construction and positive attachment to the machine frame ensures accurate, repeatable cuts for your production jobs.

48 inch auto cut

Automatic Back Gauge - 48 Inch Auto Cut - Ease Your Production Cutting

Use this plug-and-play accessory when production cutting long material to repeatable lengths. The adjustable proximity switch automatically cycles your machine as you guide the material. The 48 inch Auto Cut, compatible with current Edwards Ironworkers, features a rugged solid-steel housing, guarding snoot, 1 x 48 inch machined back-gauge stock, electrical cording and adjustable electrical tiebacks. Installs in minutes with simple instructions.

fabricators protractor

Protractor - Work With the Right Angle

A useful tool for anyone, the Edwards Fabricators Protractor guides your work to the Shear or Punch stations through 180 degrees. Gauged at 15 degree increments with an additional designation of 22.5 degrees, the protractor features a long leg and a reversible design to accommodate both right and left hand operators.

oversized punch assembly

Oversized Punch Assembly - When a Standard Punch isnt Enough

The Oversize Punch Assembly takes the place of your standard Punch Assembly to accomodate punches and dies in various shapes and sizes from 1 to 1-9/16 inch. Oversize Punch and Die Sets sold separately. See our standard stocked Punch and Die Sets and contact us for custom sizes.

  • Oversize Punch Assembly
  • For 100 Ton Deluxe and 120 Ton

Punched holes or shapes larger than 1-9/16 inch require the 241 Punch Assembly.

241 punch assembly

241 Punch Assembly - When bigger is better, use 241

The 241 Punch Assembly accommodates punch and die sets in various shapes and sizes from 1" through 4". This tooling can be used to punch large holes and slots in anything from sheet metal to plate to steel beams. Shown with optional Oblong Punch and Die Set. Contact Edwards for pricing and availability of the 241 Punch and Die Set to meet your needs.

multi shear

Multi Shera - Maximum Flexibility for Smaller Ironworkers

Cut solids rods, squares, angles and bar-stock all with ONE tool. The Multi-Shear makes quick work of solid round 1/4, 3/8, 1/2, 5/8, 3/4 inch rod, and 13/16 inch square. Also cuts flat bar up to 1/4 x 6 inch and angle up to 2 x 2 x 1/4 inch.

rod shear and housing

Rod Shear Housing - Shears a variety of rod

The Edwards Rod Shear and Housing is a heavy-duty accessory tool that comes ready to work your 1/4, 3/8, 1/2, 5/8, 3/4 and 1 inch solid rod.

stripper reducing plate

Stripper Plate - Quality Results with Easy Operation

The Stripper Reducing Plate is a spring-loaded, self-locating accessory that minimizes distortion in thinner gauge material when using smaller punches and dies. This accessory is easily applied to stripper bars with two bolts and uses a spring-loaded detent to properly align. When not in use, the plate swings easily out of the work area. Not compatible with old-style stripper bars.

Urethane Stripper - Easily Minimizes Distortion

By maintaining constant pressure through the punch cycle, the Urethane Stripper minimizes distortion. A must-have when working with light-gauge material.

press brake back gauge

Press Bake Back Gauge - Making repeatable bends?

Our adjustable Press Brake Back Gauge makes for easy set-up of repeatable bends. Simply bolt it up to the Edwards Ironworker Brake Tooling assembly or Press Brake Tooling for our 20 Ton Shop Press and 40 Ton Shop Press, and a simple hand crank glides the carriage backstop to your desired brake location.

Pedistal Die Table (Standard on all NEW Edward's Iron Workers)

A standard feature on new Edwards Ironworkers from 25 Ton to 100 Ton, add our Pedestal Die Table to your existing Edwards Ironworker to punch flange or web surfaces of 2 x 2 inch steel angle, channel and beam sections. You can even punch larger angle sections leg-down. The Pedestal Die Table allows for the accessory Gauging Table Kit to be easily installed for a larger working and layout surface. Also available in Oversize for your larger Punch applications.

  • Pedestal Die Table
  • Oversize Pedestal Die Table
Porta Power

Porta Power

If you need an additional power source, the Edwards Porta Power with 5hp/2750psi goes anywhere you want it. With a quick connection, the compact design perfectly suits the Edwards Hydraulic Accessory Tools.

 

 

10 Ton Tube and Pipe Bender 20 Ton and 40 Ton Shop Press & Brake Stand Alone and Factory Installed
Hydraulic Pump for Benders and Presses
Edwards "NEW" 10 ton pipe & tube bender press Edwards "NEW" Stand alone hydraulic pump

Click on Picture above to be redirected to these items

EDWIW100-1PH230 mfg. item #: IW100-1PH230
$15849.17   msrp $18796.00  
100 TON IRONWORKER 1PH/220V
STILL MANUFACTURED AND ASSEMBLED IN THE USA
FREE - 8 PC PUNCH & DIE (EDWE08-00) RETAIL VALUE OF $303.00
lease to own for as little as:$317 per month! 17
Call for freight quote on this item or we will confirm freight charges before shipping.1


EDWIW100-3PH208 mfg. item #: IW100-3PH208
$15597.80   msrp $18496.00  
100 TON IRONWORKER 3PH/208V
STILL MANUFACTURED AND ASSEMBLED IN THE USA
FREE - 8 PC PUNCH & DIE (EDWE08-00) RETAIL VALUE OF $303.00
lease to own for as little as:$312 per month! 17
Call for freight quote on this item or we will confirm freight charges before shipping.1


EDWIW100-3PH230 mfg. item #: IW100-3PH230
$15597.80   msrp $18496.00  
100 TON IRONWORKER 3PH/220V
STILL MANUFACTURED AND ASSEMBLED IN THE USA
FREE - 8 PC PUNCH & DIE (EDWE08-00) RETAIL VALUE OF $303.00
lease to own for as little as:$312 per month! 17
Call for freight quote on this item or we will confirm freight charges before shipping.1


EDWIW100-3PH460 mfg. item #: IW100-3PH460
$15698.35   msrp $18616.00  
100 TON IRONWORKER 3PH/460V
STILL MANUFACTURED AND ASSEMBLED IN THE USA
FREE - 8 PC PUNCH & DIE (EDWE08-00) RETAIL VALUE OF $303.00
lease to own for as little as:$314 per month! 17
Call for freight quote on this item or we will confirm freight charges before shipping.1


EDWIW100-3PH575 mfg. item #: IW100-3PH575
$16103.89   msrp $19100.00  
100 TON IRONWORKER 3PH/575V
STILL MANUFACTURED AND ASSEMBLED IN THE USA
FREE - 8 PC PUNCH & DIE (EDWE08-00) RETAIL VALUE OF $303.00
lease to own for as little as:$322 per month! 17
Call for freight quote on this item or we will confirm freight charges before shipping.1


EDWE08-00 mfg. item #: E08-00
$299.95   msrp $303.00  
PUNCH & DIE STARTER BOX-8 SETS: 3/16,5/16,7/16,9/16,11/16,13/16,15/16,1 1/16
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW0900-KIT-HD mfg. item #: 0900-KIT-HD
$566.44   msrp $636.00  
AC0900-KIT-HD - HEAVY DUTY GAUGING TABLE KIT - 1 X 12 X 16 WITH 1 X 6 X 10 SUPPORT PLATE - INCLUDES 1 SHORT & 1 LONG FENCE, STANDARD TO 1 - 1/16
lease to own for as little as:$11 per month! 17
FREE shipping when ordered with a machine from this manufacturer.20


EDW0900-KIT-{00 mfg. item #: 0900-KIT-HD-OHD
$617.20   msrp $693.00  
AC0900-KIT-HD-OHD - OVERSIZE HEAVY DUTY GAUGING TABLE KIT - 1 X 12 X 16 WITH 1 X 6 X 10 SUPPORT PLATE - INCLUDES 1 SHORT & 1 LONG FENCE, OVERSIZE TO 1-9/16
lease to own for as little as:$12 per month! 17
FREE shipping when ordered with a machine from this manufacturer.20


EDW0900-01 mfg. item #: 0900-01
$37.41   msrp $42.00  
AC0900-01 - FENCE (SHORT) - 2 HANDLES
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW0900-02 mfg. item #: 0900-02
$44.53   msrp $50.00  
AC0900-02 - FENCE (LONG) - 2 HANDLES
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1098 mfg. item #: 1098
$1156.65   msrp $1315.00  
AC1098 - COPER-NOTCHER FOR THE 100 TON JAWS IV, ELITE 68 & ELITE 110 TON IRON WORKERS **
lease to own for as little as:$23 per month! 17
FREE shipping when ordered with a machine from this manufacturer.20


EDW0125-31 mfg. item #: 0125-31
$955.23   msrp $1086.00  
AC0125-31 - VEE NOTCHES-3 X 3 X 1/4 (ANGLE NOTCHER)
lease to own for as little as:$19 per month! 17
FREE shipping when ordered with a machine from this manufacturer.20


EDW0925-00 mfg. item #: 0925-00
$309.05   msrp $347.00  
AC0925-00 - PIPE NOTCHER HOUSING FOR SCHEDULE 40 PIPE - 1/2 THRU 2 IN ADDITION TO THIS ITEM PLEASE ADD ONE OR MORE OF THE PIPE NOTCHING DIES LISTED BELOW FOR THE CORRECT NOTCHING SIZE THAT YOU REQUIRE.
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1044 mfg. item #: 1044
$348.23   msrp $391.00  
AC1044 - PIPE NOTCHING DIES - 1/2 (SCHED 40) ** CALL FOR AVAILABILITY OF DIES FOR SCHEDULE 80 PIPE AND SPECIAL TUBING
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1045 mfg. item #: 1045
$374.06   msrp $420.00  
AC1045 - PIPE NOTCHING DIES - 3/4 (SCHED 40) ** CALL FOR AVAILABILITY OF DIES FOR SCHEDULE 80 PIPE AND SPECIAL TUBING
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1046 mfg. item #: 1046
$399.00   msrp $448.00  
AC1046 - PIPE NOTCHING DIES - 1 (SCHED 40) ** CALL FOR AVAILABILITY OF DIES FOR SCHEDULE 80 PIPE AND SPECIAL TUBING
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1047 mfg. item #: 1047
$425.72   msrp $478.00  
AC1047 - PIPE NOTCHING DIES - 1-1/4 (SCHED 40) ** CALL FOR AVAILABILITY OF DIES FOR SCHEDULE 80 PIPE AND SPECIAL TUBING
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1048 mfg. item #: 1048
$452.44   msrp $508.00  
AC1048 - PIPE NOTCHING DIES - 1-1/2 (SCHED 40) ** CALL FOR AVAILABILITY OF DIES FOR SCHEDULE 80 PIPE AND SPECIAL TUBING
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1049 mfg. item #: 1049
$477.38   msrp $536.00  
AC1049 - PIPE NOTCHING DIES - 2 (SCHED 40) ** CALL FOR AVAILABILITY OF DIES FOR SCHEDULE 80 PIPE AND SPECIAL TUBING
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDWCL1000 mfg. item #: CL1000
$78.00   msrp $80.00  
AL1000 - SUPER BRIGHT LCD ACCESSORY LIGHT
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1035 mfg. item #: 1035
$1068.69   msrp $1215.00  
AC1035 - 12 BRAKE W/4-WAY DIE-1/16, 1/8,3/16,1/4 10 (FOR USE WITH THE 75 & 100 TON JAWS IV IRONWORKER
lease to own for as little as:$21 per month! 17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1011 mfg. item #: 1011
$205.73   msrp $231.00  
AC1011 - BACK GAUGE - UP TO 48
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW48AC mfg. item #: 48AC
$659.69   msrp $750.00  
AC48AC - 48 AUTO CUT FOR PRODUCTION CUTTING
lease to own for as little as:$13 per month! 17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1017 mfg. item #: 1017
$36.52   msrp $41.00  
AC1017 - FABRICATORS PROTRACTOR
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW0895-01 mfg. item #: 0895-01
$411.47   msrp $462.00  
AC0895-01 - OVERSIZE PEDESTAL DIE TABLE - OVERSIZE TO 1-9/16
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1024 mfg. item #: 1024
$514.78   msrp $578.00  
AC1024 - OVERSIZE PUNCH ASSEMBLY (1024) - FOR 25 TO 100T UNITS
lease to own for as little as:$10 per month! 17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1055 mfg. item #: 1055
$1093.32   msrp $1243.00  
AC1055 - 241 PUNCH ASSEMBLY (1055) FOR ROUND PUNCH & DIES 1 - 4
lease to own for as little as:$22 per month! 17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1075 mfg. item #: 1075
$804.82   msrp $915.00  
AC1075 - MULTI SHEAR, CAPACITIES - CUT SOLIDS RODS, SQUARES, ANGLES AND BAR-STOCK ALL WITH ONE TOOL, THE EDWARDS MULTI-SHEAR. THE MULTI-SHEAR MAKES QUICK WORK OF SOLID ROUND 1/4, 3/8 1/2, 5/8, 3/4 ROD, AND 13/16 SQUARE. ALSO CUTS FLAT BAR UP TO 1/4 X 6 AND ANGLE UP TO 2 X 2 X 1/4.
lease to own for as little as:$16 per month! 17
FREE shipping when ordered with a machine from this manufacturer.20


EDW0858-01 mfg. item #: 0858-01
$1117.07   msrp $1270.00  
AC0858-01 - ROD SHEAR AND HOUSING-1/4,3/8,1/2,5/8,3/4,1
lease to own for as little as:$22 per month! 17
FREE shipping when ordered with a machine from this manufacturer.20


EDW1099 mfg. item #: 1099
$483.61   msrp $543.00  
AC1099 - URETHANE STRIPPER ASSEMBLY
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW0895-00 mfg. item #: 0895-00
$349.13   msrp $392.00  
AC0895-00 - PEDESTAL DIE TABLE - STANDARD TO 1-1/16
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW0127-02 mfg. item #: 0127-02
$251.16   msrp $282.00  
AC0127-02 - GREASELESS SLIDES
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDWAC600/AC700 mfg. item #: AC600/AC700
$868.18   msrp $1000.00  
AC600/AC700 - FACTORY INSTALLED HYDRAULIC ACCESSORY PACK AVAILABLE ON NEW MACHINES ONLY 65, 75 & 100 TON MODELS ONLY. (NOT FOR 100 TON DELUXE MODEL)
lease to own for as little as:$17 per month! 17
FREE shipping when ordered with a machine from this manufacturer.20


EDWHP/D mfg. item #: HP/D
$196.00    
HEX PUNCH & DIE UP TO 29/32 ** INDICATE SIZE OF PUNCH & DIE IN NOTE FIELD AT CHEXK OUT - SET: ONE PUNCH, ONE DIE
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDWKOP/D mfg. item #: KOP/D
$132.00    
OBLONG PUNCH & DIE UP TO 1-1/16 ** INDICATE SIZE OF PUNCH & DIE IN NOTE FIELD AT CHEXK OUT - SET: ONE PUNCH, ONE DIE
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDWRP/D  
call for price
 


EDWP/D mfg. item #: P/D
$36.00    
ROUND PUNCH & DIE UP TO 1-1/16 ** INDICATE SIZE OF PUNCH & DIE IN NOTE FIELD AT CHEXK OUT - SET: ONE PUNCH, ONE DIE
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDWSQP/D mfg. item #: SQP/D
$103.31   msrp $116.00  
SQUARE PUNCH & DIE UP TO 3/4 ** INDICATE SIZE OF PUNCH & DIE IN NOTE FIELD AT CHEXK OUT - SET: ONE PUNCH, ONE DIE
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDWOSP/D mfg. item #: OSP/D
$61.00    
OVERSIZED ROUND PUNCH & DIE UP TO 1-9/16 ** INDICATE SIZE OF PUNCH & DIE IN NOTE FIELD AT CHEXK OUT - SET: ONE PUNCH, ONE DIE
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDWOSSQP/D mfg. item #: OSSQP/D
$193.00    
OVERSIZED SQUARE PUNCH & DIE UP TO 1-1/16 ** INDICATE SIZE OF PUNCH & DIE IN NOTE FIELD AT CHEXK OUT - SET: ONE PUNCH, ONE DIE
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDWOSKOP/D mfg. item #: OSKOP/D
$227.00    
OVERSIZED OBLONG PUNCH & DIE UP TO 1-9/16 ** INDICATE SIZE OF PUNCH & DIE IN NOTE FIELD AT CHEXK OUT - SET: ONE PUNCH, ONE DIE
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDWOSHP/D mfg. item #: OSHP/D
$266.00    
OVERSIZED HEX PUNCH & DIE UP TO 1-1/4 ** INDICATE SIZE OF PUNCH & DIE IN NOTE FIELD AT CHEXK OUT - SET: ONE PUNCH, ONE DIE
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW241P/D mfg. item #: 241P/D
$284.11   msrp $319.00  
AC241P/D - OVERSIZED ** INDICATE SIZE OF PUNCH & DIE IN NOTE FIELD AT CHEXK OUT - SET: ONE PUNCH, ONE DIE
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW241P/DA mfg. item #: 241P/DA
$318.84   msrp $358.00  
AC241P/DA - 241 SERIES 241 ROUND PUNCH & DIE 1 TO 2 ** INDICATE SIZE OF PUNCH & DIE IN NOTE FIELD AT CHEXK OUT - SET: ONE PUNCH, ONE DIE
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW241P/DB mfg. item #: 241P/DB
$350.02   msrp $393.00  
AC241P/DB - 241 SERIES 241 ROUND PUNCH & DIE 2-1/32 TO 2-1/2 ** INDICATE SIZE OF PUNCH & DIE IN NOTE FIELD AT CHEXK OUT - SET: ONE PUNCH, ONE DIE
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW241P/DC mfg. item #: 241P/DC
$391.88   msrp $440.00  
AC241P/DC - 241 SERIES 241 ROUND PUNCH & DIE 2-17/32 TO 3 ** INDICATE SIZE OF PUNCH & DIE IN NOTE FIELD AT CHEXK OUT - SET: ONE PUNCH, ONE DIE
  17
FREE shipping when ordered with a machine from this manufacturer.20


EDW241P/DE mfg. item #: 241P/DE
$421.27   msrp $473.00  
AC241P/DE - 241 SERIES 241 ROUND PUNCH & DIE 3-1/32 TO 3-1/2 ** INDICATE SIZE OF PUNCH & DIE IN NOTE FIELD AT CHEXK OUT - SET: ONE PUNCH, ONE DIE
  17
FREE shipping when ordered with a machine from this manufacturer.20



  • Hours: Monday - Friday
    8:00 AM to 7:00 pm Eastern
  • Toll Free: 1-800-458-3687
    786-866-9865

  • Fax: 865-376-9792
  • American Express American Express American Express
  •  
Copyright © 2014 Smith-Hamilton, Inc
0.017 1515 08:10:11