 |
 Call 1-800-458-3687
Monday - Friday 8:00 AM- 7:00 PM ET
|
|
Established in 1875, Edwards has been supporting the steel fabrication industry with a full line of high quality, low cost and low maintenance ironworking machines. Long considered the Swiss Army Knife of the industry, these do-all machines punch, shear, notch and brake mild steel plate, bar-stock and angle. A wide range of accessories are available to fabricate rod, square stock, sheet metal and pipe.
|
Limited Offer FREE: Punch & Die Starter Box-8 Sets: 3/16,5/16,7/16,9/16,11/16,13/16,15/16,1 1/16" |
The Ironworker below is not the 120 Ton Unit and is for Informational
Purposes only
New Features For 2008
-
Electric Stroke Control Standard
(Value $996) - New Power Unit Design
-
New "Whisper Quiet" Hydraulic System
(patent pending) - New Electronic Controls
- New Electric Foot Pedal
- Includes Coper Notcher as Standard Equipment
Key Features
- 5 Availiable Stations
- Universal Open Tooling Cavity
- Electric Foot Pedal
- 24" Bar SHear
- The Powerhouse!
Download spec sheet PDF (860k)
| 120 Ton Ironworker | |
|---|---|
| IW120-02 | 120 Ton Ironworker 1PH/220V |
| IW120-04 | 120 Ton Ironworker 3PH/220V |
| IW120-06 | 120 Ton Ironworker 3PH/440V |
| IW120-09 | 120 Ton Ironworker 3PH/575V |
| SPECIFICATIONS | ||
|---|---|---|
| PUNCH | US | Metric |
| Max. Capacity | 1-1/2" dia. in 1" plate | 3.81cm x 2.54cm |
| Work Height | 36 5/8" | 93.02cm |
| FLAT BAR SHEAR | ||
| Max. Width | 1/2" x 24" | 1.27cm x 60.96cm |
| Max. Thick. | 1" x 12" | 2.54cm x 30.48cm |
| Max. Round | 1 1/4" | 3.17cm |
| Max. Square | 1 1/4" | 3.17cm |
| Work Height | 33 3/4" | 85.72cm |
| ANGLE SHEAR | ||
| Max. Size | 6" x 6" x 1/2" | 15.24cm x 15.24cm x 1.27cm |
| Work Height | 40" | 101.6cm |
| COPER / NOTCHER | ||
| Max. Capacity | 3" x 6" x 1/2" | 7.62cm x 15.24cm x 1.27cm |
| Work Height | 40" | 101.6cm |
| OPEN CAVITY | ||
| Specifications | 11-3/4" wide x 9" tall | 29.845cm x 22.86cm |
| Work Height | 51 3/4" | 131.445cm |
| GENERAL SPECS | ||
| Rated Capacity | 120 ton | |
| Throat Depth | 11" | 27.94cm |
| Open Height | 9-1/8" | 23.17cm |
| Shut Height | 7 | 17.78cm |
| Stroke | 2 1/2" | 6.35cm |
| Electric Motor Standard | 10 HP, 3 Phase, 208/240 v, 1725 rpm, 26 amp | |
| Electric Motor Options | 10 HP, 3 Phase, 440/480 v or 575 v, 13 amp, 10 HP, 1 Phase, 230 v, 40 amp | |
| Hydraulic Pump Size | 24 gpm - stage | 90.84L per min |
| Valve Pressure | 4500 psi | 310.26bar |
| Reservoir | 17 gallons | 64L |
| Cylinder | 2 3/4" Ram | 6.98cm |
| Dimensions: Base x Height | 60" x 60" x 84" | 152.4cm x 152.4cm x 213.36cm |
| Shipping Weight | 5500 pounds | 2494.75kg |
|
Please Call 800-458-3687 To Place an Order for items listed Below! Special Order Items! Delivers usually Ground UPS in 1 Week |
||
| S T A N D A R D P U N C H E S & D I E S | ||
| Punch & Die Starter Box - #E08-00 | (8 sets: 3/16" to 1-1/16") | $239.00 |
| Hex Punch & Die up to 29/32" | Set: one punch, one die | $183.46 |
| Oblong Punch & Die up to 1-1/16" | Set: one punch, one die | $122.30 |
| Rectangular Punch & Die up to 5/8" x 7/8" | Set: one punch, one die | $245.78 |
| Round Punch & Die up to 1-1/16" | Set: one punch, one die | $34.95 |
| Square Punch & Die up to 3/4" | Set: one punch, one die | $108.19 |
| O V E R S I Z E P U N C H E S & D I E S | ||
| Round Punch & Die up to 1-9/16" | Set: one punch, one die | $56.45 |
| Square Punch & Die up to 1-1/16" | Set: one punch, one die | $176.40 |
| Oblong Punch & Die up to 1-9/16" | Set: one punch, one die | $210.50 |
| Hex Punch & Die up to 1-1/4" | Set: one punch, one die | $245.78 |
| 2 4 1 P U N C H E S & D I E S | ||
| 241 Round Punch & Die 1" to 2" | Set: one punch, one die | $296.35 |
| 241 Round Punch & Die 2-1/32" to 2-1/2" | Set: one punch, one die | $329.28 |
| 241 Round Punch & Die 2-17/32" to 3" | Set: one punch, one die | $362.21 |
| 241 Round Punch & Die 3-1/32" to 3-1/2" | Set: one punch, one die | $408.07 |
| 241 Round Punch & Die 3-17/32" to 4" | Set: one punch, one die | $435.12 |
|
NOTES:
All punch & die sets are available in 1/32" increments and are All shaped punches are shipped with keyway and drill spots. Prices subject to change without notice. Custom Punch & Dies are available. |
||
Ironworker Accessories
Edwards Ironworkers are used in all types of steel fabrication. As a time saving alternative to any saw, all standard Ironworker models may be fitted with optional
accessory tooling to help you make the most of your time and money. From heavy structural steel building components to delicate ornamental ironwork; trailer building, to the Discovery
Channel. Edwards Ironworkers are the most versatile, time saving tool in any fabrication shop. |
||
 Coper-Notcher-Nibbler Standard on 60, 65, 100 deluxe, 120 ton. Used for square, rectangular or angle V notching. Copes angle iron flanges. CLICK FOR VIDEO |
 Press-Brake Has 4-way style lower die. Has V die openings for bending metal 1/16, 1/8, 3/16, and 1/4" thick. Can bend 3/8". CLICK FOR VIDEO |
 Pipe Notcher Cuts pipe with a semi-circular cut to allow one pipe to fit 90° against another for railings. Sizes from 1/2 to 2" pipe. CLICK FOR VIDEO |
|
|
 Rod-Shear (shears 1/4, 3/8, 1/2, 5/8, 3/4, 1"diameter rod cleanly and quickly) |
 Pedestal Die Table (for punching 2"angle iron leg down. Included with most ironworkers) |
 Large Gauging Table (for attaching jigs, fixtures & fences. Choose from 3/8" thick or 1" thick) |
 Protractor Angle Gauge Sets the pice part angle when shearing flat bar or when punching. |
 Urethane Stripper (prevents distortion when punching soft aluminum, copper, brass, bronze, etc.) |
 Adjustable Back Gauge for setting repeat distances for punching holes, shearing angle and shearing flat bar. |
 Automatic Cut Back Gauge for setting repeat distances for punching or shearing. Automatically cuts without stepping on foot pedal. |
 Electric Stroke Control Saves time by shortening stroke when punching thin metal or to control upper press brake die for repeat bend angles. |
 Stripper Reducer minimizes distortion in thin metals when using smaller punches & dies |
 Oversize Punching Assembly includes oversize punch stem, nut, & die table for punching up to 1- 9/16" dia. |
 241 Large Punching Assembly for punching up to 4"diameter. Can also be used for corner radius notching. |
| 10 Ton Tube and Pipe Bender | 20 Ton and 40 Ton Shop Press & Brake |
Stand Alone and Factory Installed Hydraulic Pump for Benders and Presses |
|
|
|
Click on Picture above to be redirected to these items
|
|||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|||||||||||
|
|
|||||||||||
|
|||||||||||
|
|
|||||||||||
|
|||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|
|
0.012 1517 08:08:26