 |
14"-16" Dry Cut Double Mitering Saws
Complete with 7.5 or 10 HP TEFC motor,
magnetic starter with 110 volt at the pushbuttons, air operated dual chain
hold-down vise
Fast, Low Cost Cutting of Hardened Tool Steel,
Drills, Reamers,
Bars, Pipe, Angle Iron, Tubing, Flat Stock & Rod.
Capacity: 2" solid • 5" pipe •
30°-45°—1.75" Solids • 3" Most Shapes
Double Mitering Cutting Head can swivel 45° right
or left of center. Indicators for 0°, 15°, 30° and 45°. Cutting head and
pedestal are mounted on rugged swinging knee secured in lubricated for life
bearings. Lock to hold desired cutting angle is quick and easy to operate.
Use a steel blade to cut plastic, and with
an oil mist spray to cut aluminum, copper and nonferrous material
|
|
Cutting Speeds
(average) 90° |
| Size |
Material
|
Time |
| 1" |
Angle Iron |
2 sec. |
|
2" |
Angle Iron |
4 sec. |
| 2" |
Cold Roll Solid |
7 sec. |
| 1.5" |
Pipe |
3 sec |
|
Options/Accessories |
| Product # |
Description |
| 169003 |
Dust Collector Fume
Exhauster |
| 169040 |
Double Miter Hood
|
| 169402 |
Air Operated Work Length
Gage |
| 169403 |
Adjustable Outboard
Support |
| 169502 |
Oil Mist Spray (for
cutting nonferrous materials) |
|
Specifications |
| Wheel
Capacity |
14" or 16"
diameter |
| Motor |
7.5 or 10
HP Special Hi-Torque, 1 or 3 Phase |
| Starter |
Magnetic
with thermal overload; 110 volt at the pushbuttons |
| Spindle
Bearings |
Heavy-duty
sealed ball bearings. Lubricated for life |
| Arbor
Shaft |
1" |
| Drive |
Multiple
“V” belt, raw-edge sure grip, stretch resistant |
| Safety
Guards |
Cut-off
wheel and guards exceed safety code requirements |
| Stop |
Adjustable
down stop limits depth of chop stroke |
| Vise |
Air
operated dual chain hold-down vise. Holds on both sides of the cut-off
wheel |
|
Hydraulic Power Head |
(PH
models only) with hydraulic feed control valve for smooth accurate cutting |
| Wheel
Wear Compensator |
(WWC &
PH models only) senses end of cut, returns wheel to up position. |
|
Shipping Weight |
510-800 lbs |
|
|
7.5 HP Double Mitering (Left & Right to
45°— 45°, 30°, 15°, 0°, indicators) |
| Product # |
Description |
| 160441
|
14"-16" DM
7.5HP 230 Volt 1Ø Mag Starter |
| 160442 |
14"-16"
DM 7.5HP 208 Volt 3Ø Mag Starter |
| 160443
|
14"-16" DM
7.5HP 230 Volt 3Ø Mag Starter |
| 160445
|
14"-16" DM
7.5HP 440 Volt 3Ø Mag Starter |
|
7.5 HP Double Mitering (Left & Right to
45°— 45°, 30°, 15°, 0°, indicators)
Hydraulic Power Head
Models (PH) |
| Product # |
Description |
| 162442
|
14"-16" DM
PH 7.5HP 208 Volt 3Ø |
| 162443
|
14"-16" DM
PH 7.5HP 230 Volt 3Ø |
| 162445
|
14"-16" DM
PH 7.5HP 440 Volt 3Ø |
7.5 HP Double Mitering (Left & Right to
45°— 45°, 30°, 15°, 0°, indicators)
Hydraulic Power Head
Models (PH)
with patented Wheel Wear Compensator (WWC) |
| Product # |
Description |
| 164442
|
14"-16" DM
PH WWC 7.5HP 208 Volt 3Ø |
| 164443
|
14"-16" DM
PH WWC 7.5HP 230 Volt 3Ø |
| 164445
|
14"-16" DM
PH WWC 7.5HP 440 Volt 3Ø |
Everett Dry Cut Abrasive Blades
|
|
|
