Mini Drive Centers
These little drive centers are perfect for any of your
smaller projects. They securely hold even the smallest, most delivate turnings
and will quickly become your favorites. |
|
Stock Number |
Description |
|
709981 |
3/8" x MT-1 Drive Center |
|
709982 |
1/2" x MT-1 Drive Center |
|
709983 |
3/8" x MT-2 Drive Center |
|
709984 |
1/2" x MT-2 Drive Center |
|
Ultra Drive Centers
These centers feature a unique serrated circular ring
that delivers extra holding power. The spring-loaded center allows you to
position the center point into the wood blank and use the tailstock RAM to apply
pressure onto the serrated ring. Because there are no sharp edges being driven
into the wood, you reduce the chance of the stock splitting. Just apply enough
pressure until the center grips the stock - that's all there is too it! |
|
Stock Number |
Description |
|
709988 |
1/2"
Diameter, MT-1 |
|
709989 |
1/2"
Diameter, MT-2 |
|
799991 |
1" Diameter,
MT-2 |
|
Spur Centers
These Morse Taper spur centers are designed to mount directly in the lathe
spindle depending on your center bore |
|
Stock
Number |
Description |
| 709941 |
MT-1 Spur
Center |
| 709942 |
MT-2 Spur
Center |
|
2-Prong Drive Center
These 2-Prong Drive Centers work exceptionally well when
turning naturally edged bowls. They secure themselves into the uneven surfaces
often found with this type of turning blank. These centers can also be
repositioned very easily. They measure 1" in diameter. |
|
Stock Number |
Description |
|
709987 |
1" Diameter,
MT-2 |
|
4-Prong Drive Centers
These larger drive centers have a replaceable center point.
The spurs are sharp so they will bite into even the hardest hardwoods. The
4-prong drive center measures 1-1/8" in diameter and works great on larger
spindles needing maximum holding power. |
|
Stock Number |
Description |
|
709985 |
1-1/8"
Diameter, MT-1 |
|
709986 |
1-1/8"
Diameter, MT-2 |
|
Safe Drivers
The Safe Driver offers a unique design when it comes to drive
centers. Unlike all other spur centers, which have teeth to grip the wood, the
safe driver is like a live center with a drive point in the center and a
gripping ring around teh outside. it is the pressure applied against the cetner
and the wood that causes the wood to be turned. If you find the Safe Driver
spinning around the wood, just apply a little more pressure from the tailstock.This little device is also a great training tool for someone
just learing to turn. The Safe Driver will teach them to have better control
with their chisels, not allowing them to take too aggressive of a bite. This
center is also safer because if a chisel catches a spur center it will
definately damage the chisel; not so with the Safe Driver.
|
|
Stock Number |
Description |
|
709935 |
MT-1 Safe Driver |
|
709936 |
MT-2 Safe Driver |
|
709937 |
MT-2 Safe Driver with 5/16" Bore |
|
709938 |
MT-2 Safe Driver with 3/8" Bore |
|
Chuck Spurs
These chuck spurs are designed to mount into a scroll or
4-jaw chuck. They allow you to do spindle work without removing the chuck from
the lathe. A great time saver! |
|
Stock Number |
Description |
|
709939 |
1/2" chuck Spur |
|
