chat now with southern tool
Chat Now!
Call 1-800-458-3687
Monday - Friday 8:00 AM- 7:00 PM ET

 

Save 10% on Select  jet metalworking machinery logo Metalworking Machines
Free Freight on ALL
Jet and Wilton Metalworking and Metalforming Machines.

JET JWL-1442VSK, 14" x 42" Lathe, 1HP 1PH 115/230V
JET JWL-1642EVS, 16" x 42" EVS PRO Wood Lathe, 1-1/2HP & 2HP

 

/store/cms//411.jpeg JWL-1642
JWL-1442 JWL-1642
 
supernova 2 chuck s-h alt easy wood tools
The recomended Chuck for this lathe
is a Teknatool SuperNova 2
Click the image above for more infomation
Dont forget your turning tools
Check out or full line of easy wood tools
 

 

The Jet JWL-1442VSK, 14" x 42" VS PRO Wood Lathe with Legs
has a 5 Year warranty

This mid range lathe offers mechanical variable speed along with a headstock that pivot as well as slide to the end of the bed for outboard turning capabilities

  • Reeves drive pulley system allows quick variable speed changes from 450 to 3,000 RPM 
  • Heavy-duty cast-iron lathe bed adds stability while limiting vibration during operation
  • Headstock swivels 360° with positive stops at 45° and 90° and may be positioned anywhere along the bed ways for maximum flexibility and user comfort
  • Indexing mechanism which allows for fast, efficient, fluting and veining operations
  • Spindle has positive locking indexing in 10 degree increments for fast, efficient fluting and veining operations
  • Built-in spindle locks let you remove or replace faceplates and chucks with ease
  • Live center has a removable pin for boring through stock
  • Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use tools
  • Hollow tailstock allows you to perform long hole boring for lamps and other vessels
  • Special cast-in webbings in legs accept 2 x 4's or a 2 x 12 to construct a solid tool or sandbag shelf
708358K Manual

The JET JWL-1642EVS 16" x 42" EVS PRO Wood Lathe is a one of a kind machine for the true wood turner. With a 1.5 HP motor and electronic inverter, you can operate the machine at any speed from 50 to 3,200 RPM. Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use any tools at all.

The Jet JWL-1642EVS, 16" x 42" EVS PRO Wood Lathe, 1-1/2HP
has a 5 Year warranty

  • Digital readout allows operator to dial in the desired speed for best results
  • Heavy-duty cast-iron lathe bed adds stability while limiting vibration during operation
  • Electronic inverter lets you operate the machine at any speed from 50 to 3,200 RPM
  • Indexing mechanism allows for fast, efficient, fluting and veining operations
  • Sliding headstock may be positioned anywhere along the bed ways for maximum flexibility and user comfort
  • High/low speed change lever quickly changes belt positions
  • Spindle has positive locking indexing in 10 degree increments for fast, efficient fluting and veining operations
  • Built-in spindle locks let you remove or replace faceplates and chucks with ease
  • Live center has a removable pin for boring through stock
  • Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use tools
  • Hollow tailstock allows you to perform long hole boring for lamps and other vessels
708359 Whitepaper
708359 Manual
Detailed Specifications
Part Number 708358K 708359 708360
Brand Jet  Jet Jet
Centerline of Spindle to Floor 43.5 Inch 43.5 Inch 43.5 Inch
Distance Between Centers 42 " 42 " 42 "
Family Description 14" X 42" WOODWORKING LATHE  16" X 42" WOODWORKING LATHE 16" X 42" WOODWORKING LATHE
Headstock Movement pivot 360 and slide  slide slide
Headstock Taper MT-2  MT-2 MT-2
Height n.a. 28 inch 27.5 inch
Hole Through Tailstock 3/8 " 3/8 " 3/8 "
Indexing Positions 36  36 36
Length n.a. 59 inch 58.5 inch
Model Number JWL-1442VSK  JWL-1642EVS JWL-1642EVS-2
Motor Current 7.4 / 3.7 A  4.6 A 6.1 A
Motor Phase 1 Ph 1 Ph 1 Ph
Motor Power 1 HP 1 ½ HP 2 HP
Motor Voltage 115 / 230 V  input 115V 1Ph, after inverter 230V 3ph 230 V
Net Weight 356 pound 410 pound 456 pound
Prewired Voltage 115 V 115 V 230 V
Ram Travel 4 " 4 " 4 "
Speeds Eight, 450-3000 RPM  50-1200, 125-3200 RPM 50-1200, 125-3200 RPM
Spindle Nose 1 " x 8 TPI  1 1/4 " x 8 TPI 1 1/4 " x 8 TPI
Swing Over Bed 14 " 16 " 16 "
Swing Over Tool Rest Base 10 " 12 " 12 "
Tailstock Taper MT-2  n.a. n.a.
Width n.a. 29 inch 28.5 inch

 

s-h alt WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

 

JET LATHES and Accessories
708358K JWL-1442VSK, 14" x 42" Lathe, 1HP 1PH 115/230V
708359 JWL-1642EVS, 16" x 42" Lathe, 1.5HP 3PH 230V
708360 JWL-1642-2EVS, 16" x 42" Lathe, 2HP 3PH 230V
708346 Bed Extension 20" for 14"/16" Lathes
708347 Bed Extension 57" with Leg, for JWL-1642, JWL-1442
708348  
Woodworking Lathe Chucks, Tools & Duplicators
Teknatool Midi LAthe Chuck easy wood tools vega mini lathe duplicator
TeknaTool Nova Precision Lathe
Chuck,Jaws & Inserts
Easy Lathe Tools & Chucks VEGA PRO Lathe Duplicator

 

#1 BEST SELLING CHUCK
SUPER NOVA 2 CHUCK

This powerful and solid chuck is perfect for use on lathes with up to 20 inch/508mm swing. Brilliant all around geared chuck for a majority of users.

Packed with exciting innovative features and at a fantastically competitive price, the SuperNova 2 is the leading chuck of choice on the market today and reinforces NOVA as the leading brand in the chuck market.

Note: If your lathe is less than 20 inch diameter swing, please have a look at either the Nova Precision Midi or the Nova G3 chucks.  If your lathe has more than 20 inch diameter swing, please have a look at the NOVA Titan Chuck.

supernova 2 chuck

Features standard on all NOVA chucks:

  • Quality Materials.
  • Precision Machining.
  • Common Accessory Jaw Fixing Profile compatible across all NOVA chucks and accessories.
  • High Tech Precision Composite Jaw Slides.
  • Special Woodturning Dovetail Profile on Jaws.
  • Auto Safety Stop Feature. Jaw slides cant protrude past the chuck body.
  • Comprehensive Instructions.
  • Common Insert/Adaptor Fitting compatible across all NOVA chucks.
  • Safe Lock Woodworm Screw. 
  • 2 Years Warranty

Additional SuperNova 2 Features and Benefits

  • supernova 2 backFully sealed composite indexing backing plate.  Made from ultra tough Duracon composite, reinforced with stranded glass fibres for extremely long life in tough conditions. Self lubricating properties. Unique indexing function built into backing plate. Holographic sticker for NOVA authenticity.
  • Powerful Geared Grip with Tuff Lock Technology. Precise, hardened geared action delivers incredible smooth strength. Solid, vibration free.
  • Single Handed Operation. Fast and convenient when mounting your project. More time spent turning and less time spent preparing.  
  • Captured pinion and Ball nose Allen key with large, easy grip handle.  Fast, positive location, easy and comfortable to use. Rotation arrow for easy reference and fast opening and closing action. Unique, tilt away action, means it can be angled back in operation, away from work.
  • Body made from precision machined 1045 High Tensile Steel, with a polished self metal finish to allow for closer tolerances.
  • Able to take all NOVA accessories jaws. (except Titan Power grip, special designed for Titan Chuck.) 

Product Technical Specification

  • Recommended for power workholding on lathes from 350mm (14 inch) to 508mm (20 inch) diameter swing.
  • Up to 736mm/29 inch diameter bowls (using PowerGrip accessory jaws)
  • Up to 482mm/19 inch length spigots (using PowerGrip accessory jaws)  
  • Up to 310mm/12 inch bowl (using standard 50mm accessories jaw)
  • Up to 150mm/6 inch lengh x 10mm/4 inch diameter (using standard 50mm accessories jaw)
  • Full Packaged Weight (Std) 2.5kgs/5.512lbs
  • 24 Division Index built into the backing plate design.

Compatibilityjaws

Capable to take entire NOVA Jaws range. (except Titan Power Grip which specially designed for Titan Chuck)

Only NOVA Chucks give you the same jaw fixing system and same insert/adaptor system across all chuck models.

This means all accessory jaws in the range fit all the chucks in the range, including older chuck models, giving you the ultimate flexibility. In buying a NOVA chuck, you can be confident that whether you want to move up or down the range, any accessories you have invested in will Fit.

Standard Equipment

  • Chuck Body and Jaw Slides (Comes fully assembled)
  • 50mm/2 inch Jaws
  • Safe Lock Woodworm Screw
  • Manual and Fastenings
  • Display/Storage Box
  • T Bar Allen Head Handle with Soft Plastic Grip
  • Insert/Adaptor (some resellers may sell this separately, check with them)

Threads Covered:

  • Std Insert/Adaptor Type Chuck (Code 23055) Requires an insert to fit to lathe. Some resellers may sell this separately, check with them.

  • M33x3.5 Dedicated Threaded Chuck (Code 23062)

 

 

 

Teknatool Wood Turning Lathe Chucks, Jaws and Inserts
Teknatool Wood Turning Lathe Chucks
23055 Supernova2 Chuck Insert Version
IDNS Insert Nova 1"  8 TPI RH (For JWL-1442VSK)
ILNS Insert Nova 1 1/4"  8 TPI UNS (for JWL-1642EVS and JWL-1642EVS-2)
INNS Insert Nova Blank (Allows you to customize a insert for any lathe)

*** Chucks Require Seperate Insert for Final Insulation & Additional Jaws Sizes are Available ***

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other type of tool on the market. Designed to be kept flat on the tool rest and level to the floor, the Easy Rougher will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening. The tool design provides support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to take the pounding that you would normally suffer through when using a conventional bowl gouge for roughing. No more white knuckling a bowl gouge.

  • Cuts left, right and straight in without changing approach angle
  • Truly deeper cuts up to 1 inch off the diameter in one pass with the Full Size Rougher.
  • Requires very little physical strength or exertion
  • Your feet and hips stay in nearly the same position for the blank roughing process.
  • Very minimal handle bouncing on irregular shaped blanks
  • Reduced kick-back or sucking into work piece
  • Available Chip Deflector keeps most projectiles away from the face and neck
  • No intimidating cutting angles to learn and remember
  • No bevels to ride
  • No fear of a dangerous catch

Easy Finisher - Yet Another Innovation in Woodturning

Ci1 DetailWith another step forward in woodturning innovation, Easy Wood Tools now offers you a tool to take up where the Easy Rougher leaves off. The Easy Finisher has a round carbide cutter perfect for doing the inside work on smaller bowls and for larger coves on spindle work. Our carbide inserts are made in the USA and we are pleased to offer you a tool that is 100 percent made in America.

If you own one of our existing Easy Roughers, you well know by now that we deliver even more than we advertise, as hard as is was for you to believe before your first purchase. I assure you the productivity of this tool will exceed your highest expectations. You just can not predict the possibilities or joy this tool will provide you. In testing the prototypes for this new design, I found myself creating forms that were never even on my list to try because the dangers and complications of existing tools were just not worth the trouble.  Craig Jackson, Founder

Like the other Easy tools, the Easy Finishers are designed to be used with the tool rest set so that when the tool is held level the top of the cutter is on center. Then just keep it level to the floor and flat on the tool rest for all types of cuts... it does not get any easier than that. There are no complicated approach angles, or bevels to ride. The design of this tool allows the Easy Finisher to effortlessly cut from the center of a bowl out to the rim OR from the rim to the center! All without changing any angles whatsoever. You just stand in one spot and cut coming and going until you get to the shape you want.

The Easy Finisher utilizes the same carbide cutter technology as the Easy Rougher that reduces strain and fatigue, improves productivity, and virtually eliminates sharpening. It comes loaded with one round cutter and when it gets dull, you just rotate the cutter for a fresh cut. Please note: The round cutters are not interchangeable with the carbide cutters on the Easy Rougher tool bars.

When the cutter eventually gets dull, just loosen the retaining screw and rotate cutter about 1/4 of a turn, then re-tighten the screw.

We promise this tool will open up a whole new level of design possibilities for your craft and it will exceed your expectations. If not, return for a complete refund.

Replacement carbide cutter number is engraved right on the tool bar.

Available in four sizes - Mini, Mid-Size, Full-Size and Pro. See purchase page for all products, sizes and accessories.

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Detailer tools really pick up where other tools leave off and provide another level of woodturning creativity as the unique diamond cutter shape fits in tight places where the cutters on the other tools will just not fit.

These tools were designed for the primary purpose of doing the small intricate work and cutting final details on your projects such as small coves and beads on both spindle and bowl work. They are also very handy for cutting chuck tenons and making inside reverse angle cuts for inside chucking bowls with dovetail jaws. You may find they work well for hogging your green wood projects too.

The Easy Detailers are engineered to cut going straight in employing just the nose of the tool.

The Easy Detailer tools are engineered with a reduced relief angle to the long cuttings edges making the long edges less aggressive when held in contact with the wood as the nose of the tool is cutting. In use, the long edge is intended to perform as a "control surface" and serve to be in contact with the wood just behind the cut; much like a bevel is being rubbed.

For safety reasons, avoid plunging the tool so deep into the work at once to the depth you would have both sides of the cutter in contact with the wood too greatly at the same time. This could cause too much force at once and lead to binding of the tool in the groove.

Each diamond-shaped Easy Detailer cutter is engineered to fit all size Detailer tools in our current product line. When the cutter eventually dulls, just loosen the retaining screw and rotate cutter, then re-tighten the screw.

Replacement carbide cutter number is engraved right on the tool bar.
Available in four sizes - see purchase page for all products, sizes and accessories.

PART NUMBER DESCRIPTION
2200 MID-SIZE EASY ROUGHER
3200 PRO EASY ROUGHER
6300 MID-SIZE EASY FINISHER
3400 PRO EASY FINISHER
7300 MID-SIZE EASY DETAILER
3700 PRO EASY DETAILER

 

 

More Informationshow more
WMH708358K mfg. item #: 708358K
$1429.99   msrp $1714.00  
JWL-1442VSK, 14 X 42 LATHE, 1HP 1PH 115/230V
lease to own for as little as:$29 per month! 3
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on all JET, POWERMATIC, WILTON and Performax products on this order. See additional details at checkout.28


More Informationshow more
WMH708359 mfg. item #: 708359
$2344.99   msrp $2816.00  
JWL-1642EVS, 16 X 42 LATHE, 1.5HP 3PH 230V
lease to own for as little as:$47 per month! 3
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on all JET, POWERMATIC, WILTON and Performax products on this order. See additional details at checkout.29


More Informationshow more
WMH708360 mfg. item #: 708360
$2649.99   msrp $3183.00  
JWL-1642-2EVS, 16 X 42 LATHE, 2HP 1PH 230V
ADD TO CART NOW FOR ADDITIONAL INFORMATION & PROMOTIONS !
lease to own for as little as:$52 per month! 3
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on all JET, POWERMATIC, WILTON and Performax products on this order. See additional details at checkout.7


More Informationshow more
WMH708346 mfg. item #: 708346
$269.86   msrp $273.00  
BED EXTENSION 20 FOR 14/16 LATHES
  3
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on all JET, POWERMATIC, WILTON and Performax products on this order. See additional details at checkout.25


More Informationshow more
WMH708347 mfg. item #: 708347
$653.41   msrp $696.00  
BED EXTENSION 57 WITH LEG, FOR JWL-1642, JWL-1442
lease to own for as little as:$13 per month! 3
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on all JET, POWERMATIC, WILTON and Performax products on this order. See additional details at checkout.26


More Informationshow more
WMH708348 mfg. item #: 708348
$267.75   msrp $362.00  
LEG SET FOR JWL-1442
PRICE REFLECTS AN EXTRA 15% OFF OUR ALREADY LOW PRICE. SALE ENDS MARCH 10TH 2014
  242
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on all JET, POWERMATIC AND WILTON products on this order. See additional details at checkout.1005


TEK23055 mfg. item #: 23055
$199.99   msrp $266.59  
SUPERNOVA2 CHUCK INSERT VERSION - WOODWORKING LATHE CHUCKS (REQUIRES THE PURCHASE OF AN INSERT TO BE MOUNTED ON THE LATHE)
  30
Ships FREE via UPS to lower 48 states.5


TEKIDNS mfg. item #: IDNS
$25.99   msrp $33.46  
INSERT NOVA 1 8 TPI RH
  30
Ships FREE via UPS to lower 48 states.5


TEKILNS mfg. item #: ILNS
$25.99   msrp $33.46  
INSERT NOVA 1 1/4 8 TPI UNS
  30
Ships FREE via UPS to lower 48 states.5


TEKINNS mfg. item #: INNS
$25.99   msrp $33.46  
INSERT NOVA BLANK
  30
Ships FREE via UPS to lower 48 states.5


EASY2200 mfg. item #: 2200
$119.00    
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY ROUGHER ** USE CI2-SQ - GENUINE EWT REPLACEMENT CARBIDE - REPLACEMENT CUTTER OPTION: CI2-R2
  182
Ships FREE via UPS to lower 48 states.5


EASY3200 mfg. item #: 3200
$139.98    
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY ROUGHER ** USE CI1-R4 - GENUINE EWT REPLACEMENT CARBIDE - REPLACEMENT CUTTER OPTIONS: CI1-SQ OR CI1-R2
  182
Ships FREE via UPS to lower 48 states.5


EASY6300 mfg. item #: 6300
$119.00    
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY FINISHER ** USE CI3 - GENUINE EWT REPLACEMENT CARBIDE
  182
Ships FREE via UPS to lower 48 states.5


EASY3400 mfg. item #: 3400
$139.98    
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY FINISHER ** USE CI0 - GENUINE EWT REPLACEMENT CARBIDE
  182
Ships FREE via UPS to lower 48 states.5


EASY7300 mfg. item #: 7300
$119.00    
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY DETAILER ** USE CI4 - GENUINE EWT REPLACEMENT CARBIDE
  182
Ships FREE via UPS to lower 48 states.5


EASY3700 mfg. item #: 3700
$139.98    
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY DETAILER ** USE CI4 - GENUINE EWT REPLACEMENT CARBIDE
  182
Ships FREE via UPS to lower 48 states.5



  • Hours: Monday - Friday
    8:00 AM to 7:00 pm Eastern
  • Toll Free: 1-800-458-3687
    786-866-9865

  • Fax: 865-376-9792
  • American Express American Express American Express
  •  
Copyright © 2014 Smith-Hamilton, Inc
0.007 2262 03:50:27