KS Counter
Designed as an easy-to-use
display with basic functions, the KS Counter allows shortened machining time, a
simplified machining procedure, and reduced errors. Features include:
- 2-axis or 3-axis display
available
- Variable resolution setting
as low as 0.00002"
- Absolute/incremental
positioning
- Linear error compensation
- Counting direction
setting
- Half calculation
- Inch to millimeter
conversion
- Memory backup
- Preset capability
- Smoothing
- Zero setting
|
|
UDR-220
Counter
Designed with all the
features of the KS Counter, except smoothing, the UDR-220 Counter also allows
tool offsets and recall, as well as zero approach machining:
- 2-axis display only
- Variable resolution setting
as low as 0.00005"
- Absolute zero approach
machining
- Incremental zero approach
machining
- Scale reference
points
- Thermal coefficient factor
compensation
- Tool offset and
recall
|
|
KC Counter
High performance is possible
with the KC Counter, as it includes many of the features of the KS and UDR-220
Counters, plus programming capabilities. It includes all the features found on
the KS Counter, as well as the following additional features:
- Absolute zero approach
machining
- Incremental zero approach
machining
- Addition/subtraction
- Bolt hole circle
machining
- Lost motion
compensation
- One-touch operation key
- Programmable
- Programmable remote control
- Scale reference points
- Touch-signal probe
- Zero set remote
controller
|
|
| Specifications |
| Model |
KS Counter |
UDR-220 |
KC Counter |
| # Disply Axis |
2 or 3 |
2 |
2 or 3 |
| Absolute Zero Approach Machining |
No |
Yes |
Yes |
| Absolute/Incremental Switchable |
Yes |
Yes |
Yes |
| Addition/Subtraction |
No |
No |
Yes |
| Bolt Hole Pattern |
No |
No |
Yes |
| Counting Direction Setting |
Yes |
Yes |
Yes |
| Half Calculation |
Yes |
Yes |
Yes |
| Inch/Metric Conversion |
Yes |
Yes |
Yes |
| Incremental Zero Approach Machining |
No |
Yes |
Yes |
| Linear Error Compensation |
Yes |
Yes |
Yes |
| Memory Backup |
Yes |
Yes |
Yes |
| Preset Capable |
Yes |
Yes |
Yes |
| Programmable |
No |
No |
Yes |
| Scale Reference Points |
No |
Yes |
Yes |
| Smoothing |
Yes |
No |
Yes |
| Tool Offset and Recall |
No |
Yes |
Yes |
| Variable Resolution |
Yes (.00002") |
Yes (.00005") |
Yes (.00002") |
| Warranty |
3 year |
3 year |
3 year |
| Zero Setting |
Yes |
Yes |
Yes |
|
|
