Concrete Saws - C2020SS Owner's Manual with Parts List
The Norton Clipper C20 series of self-propelled flat saws are manufactured with an uncomplicated reinforced frame design to withstand the harshness of job cutting requirements on mid-sized jobs. Blade capabilities of 16", 20" or 24". The self-propelled hydrostatic transmission and the 4-V belt drive transfers maximum power to the blade shaft for ease of operation and durable performance
Specifications | |
---|---|
Technical Specifications | C2020SS |
Product Number | 701846 27370 1 |
Blade Guard Capacity in (mm) | 20 (356) |
Maximum Depth of Cut in (mm) | 7-5/8 (193) |
Arbor Size in (mm) | 1 (25) |
Blade Flange Diameter in (mm) | 4-1/2 (114) |
Blade Shaft RPM | 2520 RPM |
Blade Shaft Diameter in (mm) | 1-1/4 (32) |
Blade Shaft Bearings | Heavy Duty Pillow Block |
Blade Shaft Drive | 4 Belts |
Blade Guard Attachment Pivoting, | Pivoting, All Steel |
Blade Control | Hand Wheel/Screw Feed |
Axle Front in (mm) | 3/4 (19) |
Axle Rear in (mm) | 3/4 (19) |
Wheels Front D x W x B in (mm) | 5x2x3/4 (127x50x19) |
Wheels Rear D x W x B in (mm) | 6x2x3/4 (152x50x19) |
Handle Bars/Adjustment Length | 20-5/8 (530) |
Transmission | Eaton Hydrostatic |
Control | Roller Gear |
Speed | 0-220 FPM |
Chassis | Heavy duty jig welded box frame |
Power Source | Gasoline, 2 Cylinder 4 Cycle |
Engine Type | Honda GX620 |
Specifications | GX620TXF2 |
Maximum Horsepower | 20 HP (14.9 kW) |
Net Horsepower | 18.1 HP (13.5 kW) |
Displacement cu In (l) | 37.5 cu in (.614 l) |
Bore in (mm) | 3.3 (77) |
Stroke in (mm) | 2.6 (66) |
Cylinders/Cycle | 2 Cylinder 4 Cycle |
Fuel Capacity gal (l) | 2.12 gal. (8.03 l) |
Oil Capacity qt (l) | 1.90 qt. (1.8 l) |
Air Filter | Four Stage Honda |
Starter | Electric |
Engine Cooling | Forced Air |
Saw Dimensions Height | 40 (1,016) |
Minimum Saw Length (Transport) in (mm) | 56 (1,142) |
Maximum Saw Length (Working) in (mm) | 114 (2,896) |
Maximum Pointer Length in (mm) | 40 (1,016) |
Frame Width in (mm) | 17 (432) |
Saw Width in (mm) | 26 (660) |
Front (Outside to Outside Wheel Width) in (mm) | 14-3/16 (360) |
Rear (Outside to Outside Wheel Width) in (mm) | 15-1/4 (388) |
Blade to Wall in (mm) | 2-9/16 (65) |
Wheel Base Length in (mm) | 16-1/6 (407) |
Blade shaft Maximum Height in (mm) | 16 (407) |
Weight Crated lbs. (kg) | 468 lbs (212 kg) |
Weight Uncrated lbs (kg) | 428 (195 kg) |
Blade floor saw blade 20 in cured concrete wet cut | CHWCGP2012 |
A:The first thing to understand when measuring the life of a diamond blade is the unit of measure that represents the actual amount of material removed by the diamond blade. Material removal when referenced for diamond blades is expressed in inch-feet. The unit of inches describes the depth of cut of the blade and the unit of feet is used to indicate the distance of travel. So for example a blade this is used to make a 30 foot long cut 5 inches deep will have removed 150 inch-feet of material. It is also possible that a blade that is used to make a ten foot long cut ten inches deep will have removed 150 inch-feet of material. So to get the amount of material removed it is simply a matter of multiplying the length of the cut in feet by the depth of the cut in inches to get the total inch-feet removed.
No accessories listed