|
Original
Nova Chuck
- Stock No,: 709345
- The original
4-jaw Nova chuck. Comes standard with 50mm (2") external collets.
These collets will expand into a 2" to 3" dovetail recess in
the base of your turning. Insert required
Nova
Chuck with 1" x 8 TPI Insert
Companion
SuperNova Chuck
- Stock No.: 709346
- The next
generation of Nova chuck from the manufacturers that revolutionized
the lathe chucking system It features a nickel plated bldy that is
made from K1045 machine steel for optimum stength. It's patented
"Tuff Lock" gearing system delivers quick gripping power far
beyond that of the orininal nova chuck. This chuck offers you extra
olding strngth and stability and decreases vibration. The SuperNova
only requires one hand to operate which means less effort is needed
for secure tightening. Insert and jaws require. See two upgrades
below.
- SuperNova chuck;
standard upgrade and 1" x 8 TPI insert. 709346K
Upgrade
Kit to Standard Supernova Chuck
- Stock No. 709347
- Upgrades with
50mm (2") jaws to turn a wide array of bowls and spigot turnings
up to 14". The Woodworkm screw gives an excellent screw center
option.
Upgrade
Kit to Premier SuperNova Chuck
- Stock No.: 709348
- Upgrades with
Powergrip jaws with over 75mm (3") square or 3-1/2" round
gripping capacity. They will also grip into an expandingdovetail
facility of up to 120mm (4-3/4"). The Woodworm screw gives an
excellent screw center option.
Nova
/ SuperNova Accessories
- All Nova/SuperNova
accessories are adaptable to either chuck
- Match the thread
on your lathe headstock spindle to the required chuck insert
| Inserts |
| StockNo: |
709490 |
1" x 8
TPI |
| Stock
No: |
709491 |
3/4"
x 16 TPI |
| Stock No: |
709492 |
1" x
12 TPI |
| Stock
No: |
709493 |
5/8"
Plain |
| Stock No: |
709494 |
7/8" x
14 TPI |
| Stock
No: |
709510 |
1-1/4"
x 8 TPI |
| Stock No: |
709511 |
Blank
Insert |
Cole
Jaw Chuck Set
- Stock No.: 709495
- These jows are
3/8" cast aluminum and come with 8 rubber stoppers to position in
any of the 8 diameter threaded holes. Position on the face of the
collet bowls to finish the bottom of a bowl up to 10" in
diameter. To accomodate larger bowls the stoppers may grip the inside
and expand out or custom made wood plates may be applied. Not
applicable on JML-1014.
Cole
Jaw Fastening Spare Kit
- Stock No. 709496
- 8 extra rubber
stops and screws
|
JET
Lathe Accessories
25MM
(1") Jaw Set
- Stock No.: 709497
- Use on smaller
work. Grip the outside of your round stock 3/8" to 1-1/4" in
diameter. 1" capacity pin chuck for expanding dovetail work or
gripping square stock 1/2" to 1"
100MM
4" Jaw Set
- Stock No.: 709500
- Expanding
dovetail jaws are designed to grip bowls up to 14" in diameter.
Contracting jaws grip the bottom of up to a 3-1/2" diameter or
square billets from 2-9/16" to 3-1/8"
130MM
(4") Jaw Set
- Stock No.: 709501
- Designed to hold
bowls up to 29" in diameter. These jaws will grip spigots from
4-1/4" to 5" and expand into dovetail recesses from
4-7/8" to 5-7/8"
Pin
Jaws
- Stock No.: 709507
- Pin jaws work
like traditional pin chucks. Expands into a 1" or larger hold to
grip the workpiece
Chuck
Jaw Fastening Set
- Stock No,: 709498
- 8 extra jaw
fastening screws and 2 hex keys
Step
Jaw Set
- Stock No,: 709498
- These jaws are
designed to grip in the contraction mode. The step sizes provide
optimum gripping for 3 bowl foot sizes. They will grip from
1-5/8" to 1-4" diameters. Outside expanding dovetail fits a
recess 3" to 4" diameter to hold up the 12" diameter
bowls.
Spigot
Jaw Sets
- Stock No.: 709503
- 35 mm (1-3/8")
- Stock No.: 708504
- 45 mm (1-3/4")
- Heavy jaw sets
for heavy spigot (tenon) turning. Designed with a special serrated
tooth and a 30 mm depth they really grip into your work piece. Great
where long overhangs are needed or when hollowing into end grain
Premium
Powergrip Jaws
- Stock No.: 709505
- These are AWESOME
jaws!!! Best used with the SuperNova, the extra gripping power of the
chuck enhances the Powergrip action. They allow you to hold stock up
to 29" diameter, but has the added advantage over the 130mm jaws
because they are able to hold long spigots up to 19" long
150MM
(5-7/8") Index Faceplate
- Stock No.: 709506
- Adapts to your
lathe with standard threaded inserts. Has 8 screw positions and 4
slots where screws or other holding methods can be used. Can handle
workpieces up to 30" in diameter. The outer circumference is
indexed with 96 positions, every 3-3/4 degrees.
Spur
Center
- Stock No.: 709508
- This rugged
4-spur center fits snugly into either Nova chuck. Designed to be
secured by standard 50mm jaws.
Vari-Jaw
Set
- Stock No.: 709509
- This jaw enables
you to adjust the center point of your turning from on center to 40 mm
off center (1-1/2"). The dual action of the offset means the Vari-Jaws
can produce an almost limitless range of effects.
|
