Stow Concrete Flex Shaft Vibrators

Two shaft diameters and seven power heads allow you to match the equipment
to the job.

---

Use with 314V shafts

Model 900: 7/8" x 14 1/2"
Model 1000: 1 1/16" x 13 7/8"
Model 1300: 1 3/8" x 15 1/2"

Use with 382V shafts

Model 1400: 1 3/8" x 15 1/4"
Model 1700: 1 11/16" x 15"
Model 2100: 2 1/8" x 13 1/4"
Model 2600: 2 5/8" x 13 1/4"

• Inner core is wound from high carbon spring-wire to resist unraveling and stretching
• Coiled flat-wire reinforcement keeps the shaft from kinking
• Forged eccentrics mounted on high-speed ball bearings
• Industry’s strongest outer casing constructed of steel flat-wire covered by alternating layers of wire mesh, fabric and rubber

Everything about Stow’s SV motors is state-of-the-art.
These 1-, 2- and 3-HP units are innovative, lightweight and durable.
Choose from 115- and 230-volt capabilities.

• The new Stow SV-series vibrators are fully compatible with previous DI- and ER-series vibrators
• Easy shaft changes—half-twist quick-disconnect knob on shaft connector locks in the open position, making it easier to change the shaft
• UL and CSA approved
• Double-insulated 1-, 2-, and 3-HP motors molded in safety yellow for visibility
• Handles are fixed in rubber motor ends, absorbing the shock if the motor is dropped
• Super-tough Zenoy Resin housing—concrete won't adhere to it

SPECIFICATIONS

Model HP Amp Weight (lbs) RPM Voltage Shaft Compatibility Head Compatibility SV-1 1 10 11 15900 115V 314V 7-8 to 1-3/8 SV-2 2 15 12.5 15900 115V 382V 1-3/8 to 2-1/8 SV-2E 2 7.5 12.5 15900 230V 382V 1-3/8 to 2-1/8 SV-3 3 20 13.5 15900 115V 382V 1-3/8 to 2-5/8 SV-3E 3 10 13.5 15900 230V 382V 1-3/8 to 2-5/8

Head Model Nominal Dia. in. Compaction Capability cu. yds. per hour Distance Between Head Immersion "P" in. Maximum Head Freq'y 115V 1 in. slump Peak-to-Peak Amplitude in Air Use with 314V Shaft Use with 382V Shaft 900 7/8 1 - 3 4 12150 .062 4 -- 1000 1-1/16 2 - 4 3/4 5 1/2 11700 .092 4 -- 1300 1-3/8 3 3/4 - 7 8 12600 .092 4 -- 1400 1-3/8 3 3/4 - 7 8 12600 .092 -- 4 1700 1-11/16 9 1/2 - 15 12 11450 .114 -- 4 2100 2-1/8 12 1/2 - 21 14 11200 .106 -- 4 2600 2-5/8 22 - 35 18 9200 .108 -- 4