E-Mail Us Today!
 Click Here

Southern-Tool.Com
Call Us Toll Free: 1-800-458-3687
 Phone: 786-866-9865   Fax: 865-376-9792 
 New Extended Hours
Customer Service: M - F / 8:00  -  7:00 EST

Satisfying Customers  
 Since 1954!

Join our Mailing List

New & Featured Products

FREE Tooling!
Or FREE Freight		 New
 MH-0215-0M10-sm.jpg		 New!
ZABJ-20C3-th.jpg		 New!
 		New!
 new-250-E.jpg
Edwards Defelsko Hiretech Wilton Van Mark ICS Baileigh Space Heaters ESAB Zinko CST Bomag Cana-Vac
Stow Planers
Stow Crack Saw
Stow Floorscraper
View Cart
 
Product Search:
 

Stow Floor Grinders



On all STOW Grinders!

Stow DFG Series Floor Grinders are your best choice for the removal of dirt, grease, rubber carpet backing, industrial residues, or epoxy coatings from a horizontal surface.
  • Twin counter-rotating discs provide a work area of 24" x 12".
  • Grind to within 1 1/2" of walls or obstructions.
  • Choose from Honda-powered gasoline model or electric-powered motor models available in 2-HP and 3-HP configurations (engines are dependent on environment).
  • Attachments make the surface grinder one of the most productive and practical machines available for use by surface preparation contractors, concrete repair contractors and industrial building maintenance specialists.
  • Comfortable operator handle. Full width, tubular design maximizes operator leverage and control. Helps maximize productivity and minimize fatigue.
  • Choice of power sources. 2 or 3 HP electric, domestic and foreign voltage operation. 11 HP Honda gasoline.
  • Carry handles. Comfortable and functional when loading or unloading.
  • Full-length rubber bumper. Minimizes damage to vertical walls. Quickly removed for installation of safety and dust shield.
  

Floor Preparation Equipment Brochure

ATTACHMENTS

Floor Scraper Coatings Removal System

  • Fits General and EDCO dual-headed surface grinders.
  • Removes urethanes, mastics, epoxies and material build-ups.
  • Twin insert design minimizes damage to cap surface.
  • Replaceable tungsten carbide inserts feature eight wear edges.
  • 12 inserts required per machine.
  • Available as a kit for extra savings.

Diam-A-Tach® Diamond Segment Grinding System

  • Fits General and EDCO dual-headed surface grinders.
  • Increases productivity over grinding stones.
  • Removes thin film surface coatings without clogging.
  • Matrix options for material types and abrasion levels.
  • Offset mounting extends segment service life.
  • Replaceable diamond segment pins.
  • 6 inserts of 3 segments required per machine.

TC-GB Tungsten Carbide Grinding Block

  • Fits General and EDCO dual-headed surface grinders.
  • Tungsten carbide balls deposited in softer weld matrix.
  • Longer productivity and service life than grinding stones.
  • 6 inserts required per machine.

Grinding Stones

  • Fits General and EDCO dual-headed surface grinders.
  • Sharp edges of silicon carbide are exposed with use for aggressive grinding action.
  • Available in super-coarse C06 to polishing C120.
  • 6 stones required per machine.

Scarifier Blocks

  • Fits General and EDCO dual-headed surface grinders.
  • Utilizes heat-treated, high carbon flails mounted in reusable steel frames.
  • Breaks up hard surface deposits such as varnish, paint, epoxy fiberglass and grout.
  • Chips concrete from around aggregate.
  • 6 frames required per machine.

Wire Brushes

  • Fits General and EDCO dual-headed surface grinders.
  • Breaks up soft to medium deposits of grease, dirt, rubber carpet backing and industrial residues from floor surfaces.
  • Produces exposed aggregate slabs.
  • Removes slow setting concrete without disturbing aggregate.
  • 6 brush blocks required per machine.
SPECIFICATIONS


 
grinder-e_sm.gif MULDFG110H
$5,190.38 $4,325.32
" Dual Head Grinder, Dual 10"" Discs, Honda Gas Engine GXV-340 w/ Dual Air Filter System, 227 rpm; includes safety and dustshield kit. >>> FREE TRUCK SHIPPING - To Any Commercial Address (Home Businesses are NOT Considered a Commercial Address) **Note: Residential, Lift Gate and/or Redelivery Charges are NOT Included (PC051909)"
 
MULDFG20E
$4,524.95 $3,770.79
" Dual Head Grinder, Dual 10"" Discs, 2 HP 1-phase, 115/230V, 60Hz, 227 rpm; includes safety and dustshield kit. >>> FREE TRUCK SHIPPING - To Any Commercial Address (Home Businesses are NOT Considered a Commercial Address) **Note: Residential, Lift Gate and/or Redelivery Charges are NOT Included (PC051909)"
 
MULDFG30E
$4,734.82 $3,945.68
" Dual Head Grinder, Dual 10"" Discs, 3 HP 230V 60 Hz elec., 227 rpm; includes safety & dustshield kit. >>> FREE TRUCK SHIPPING - To Any Commercial Address (Home Businesses are NOT Considered a Commercial Address) **Note: Residential, Lift Gate and/or Redelivery Charges are NOT Included (PC051909)"
 
MULGS-C06
$11.52 $9.60
" Grinding Stone C 06 extra coarse, inc. Mounting wedge 29019-017 - requires 6 stones for DFG, 3 stones for SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULGS-C10
$11.52 $9.60
" Grinding Stone C 10 coarse, inc. Mounting wedge 29019-017 - requires 6 stones/DFG, 3 stones/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULGS-C24
$11.52 $9.60
" Grinding Stone C 24 medium, inc. Mounting wedge 29019-017 - requires 6 stones/DFG, 3 stones/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULGS-C80
$11.52 $9.60
" Grinding Stone C 80 fine, inc. Mounting wedge 29019-017 - requires 6 stones/DFG, 3 stones/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULGS-C120
$11.52 $9.60
" Grinding Stone C 120 super fine, incl. Mounting wedge 29019-017 - requires 6 stones/DFG, 3 stones/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULTC-GBKIT
$440.00 $360.45
"Tungsten Carbide Surface Grinding Blocks System kit, incl. 6 ea. TC-GB blocks, 6 ea.p/n 29019-017 mounting wedge, installation hammer, removal tool and tool box, 20lbs ****FREE FREIGHT Shipping On This Item ONLY When Purchase With Unit! Otherwise SEE the UPS Chart at Checkout
 
MULTC-GB
$60.00 $49.15
"Tungsten Carbide Surface Grinding Blocks, with plastic mounting wedge - requires 6 per machine, 2lbs. ****FREE FREIGHT Shipping On This Item ONLY When Purchase With Unit! Otherwise SEE the UPS Chart at Checkout
 
MUL29019-016
$23.04 $19.20
" Wire Brush Assembly; .025 flat wire x .059 fill; 4 rows, 2""x4 "" hardwood block, incl. plastic mounting wedge p/n 29019-017. Requires 6 blocks/DFG, 3 blocks/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MUL29019-021
$318.27 $265.22
" Clean Sweep Rotary Brush, 11"" OD w/silicon carb impregnated bristels; inc. mounting hardware. Requires 2/DFG, 1/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULSTARKIT
$61.45 $51.21
" STAR Scarifier Block Assembly, steel case, 12 ea. 29019-010 star type flails, hardware & plastic mounting wedge p/n 29019-017, Requires 6 blocks/DFG, 3 blocks/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULBEAMKIT
$61.45 $51.21
" BEAM Scarifier Block Assembly, steel case, 12 ea. 29019-011 beam type flails, hardware & plastic mounting p/n 29019-017 wedge, Requires 6 blocks/DFG, 3 blocks/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULPENTAGONALKIT
$172.83 $144.03
" PENTAGONAL Scarifier Block Assembly, steel case, 8 ea. 29019-012 pentagonal type flails, hardware & plastic mounting wedge p/n 29019-017, Requires 6 blocks/DFG, 3 blocks/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MUL29019-011
$3.55 $2.96
" Beam Flails, 1 3/4"" OD x 5/8"" ID x 1/8"" wide, heat treaded high carbon, 12 teeth flat tips. >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MUL29019-012
$19.58 $16.32
" Pentagonal Flail; 1 3/4"" OD x 5/8"" ID x 1/4"" wide, 5 teeth with tungsten carbide inserts. >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MUL29019-013
$1.25 $1.04
" Spacer Washer 1 5/6"" OD x 45/64"" ID x 1/8 wide. Use with all flail assemblies >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MUL29019-017
$3.36 $2.80
Plas-T-Lok (TM) Mounting wedge; high density plastic; requires 6 wedges per machine. >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)
 
MULDIAMKIT-B
$1,402.53 $1,168.77
" DIAM-A-TACH ¿ Kit, Black - for Abrasive Materials, inc. 6 DIMATACH-B 6 wedges; 6 pins; 6 O-rings; hammer, punch; tool box. >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULDIAMKIT-G
$1,402.53 $1,168.77
" DIAM-A-TACH ¿ Kit, Green - for very Abrasive Concrete/Ashalt, inc. 6 DIMATACH-G 6 wedges; 6 pins; 6 O-rings; hammer, punch; tool box. >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULDIAMKIT-P
$1,402.53 $1,168.77
" DIAM-A-TACH ¿ Kit, PURPLE - Hard Concrete, inc. 6 DIMATACH-P, 6 wedges; 6 pins; 6 O-rings; hammer; drive punch; tool box. >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULDIAMKIT-R
$1,402.53 $1,168.77
" DIAM-A-TACH ¿ Kit, RED - for Finishing & Polishing, inc. 6 DIMATACH-R 6 wedges; 6 pins; 6 O-rings; hammer, punch; tool box. >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULDIAMKIT-Y
$1,402.53 $1,168.77
" DIAM-A-TACH ¿ Kit, Yellow - General Purpose, inc. 6 DIMATACH-Y 6 wedges; 6 pins; 6 O-rings; hammer, drive punch, tool box. >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULDIAMTACH-B
$239.25 $199.37
" DIAM-A-TACH ¿ Black 40-50 grit; stamped ""B"" on pin shank, incl. plastic wedge 29019-017; Requires 6 blocks/DFG, 3 blocks/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULDIAMTACH-G
$239.25 $199.37
" DIAM-A-TACH ¿ Green 40-50 grit; stamped ""G"" on pin shank, incl. plastic wedge 29019-017; Requires 6 blocks/DFG, 3 blocks/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULDIAMTACH-P
$239.25 $199.37
" DIAM-A-TACH ¿ Purple, 40-50 grit; stamped ""P"" on pin shank, incl. plastic wedge 29019-017; Requires 6 blocks/DFG, 3 blocks/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULDIAMTACH-R
$239.25 $199.37
" DIMA-A-TACH ¿ Red; 40-50 grit; stamped ""R"" on pin shank, incl.plastic wedge 29019-017; Requires 6 blocks/DFG, 3 blocks/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULDIAMTACH-Y
$239.25 $199.37
" DIAM-A-TACH ¿ Yellow 40-50 grit; stamped ""Y"" on pin shank, incl. plastic wedge 29019-017; Requires 6 blocks/DFG, 3 blocks/SFG >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULG-SHANKKIT
$83.22 $69.35
" Diamond segment/pin replacement,Green, stamped ""G"" on pin shank. DIMATACH-G. Requires 3 segments/pins per block >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULB-SHANKKIT
$83.22 $69.35
" Diamond segment/pin replacement, Black, stamped ""B"" pin shank DIMATACH-B. Requires 3 segments/pins per block. >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULR-SHANKKIT
$83.22 $69.35
" Diamond segment/pin replacement, Red, stamped ""R"" on pin shank. DIMATACH-R. Requires 3 segments/pins per block >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULP-SHANKKIT
$83.22 $69.35
" Diamond segment/pin replacement, Purple, stamped ""P"" on pin shank p/n DIMATACH-P. Requires 3 segments/pins per block >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MULY-SHANKKIT
$83.22 $69.35
" Diamond segment/pin replacement, Yellow, stamped ""Y"" on pin shank p/n DIMATACH-Y. Requires 3 segments/pins per block >>> Free Freight ONLY When ordered with a Multiquip Machine or See Chart at Checkout (PC051909)"
 
MUL29018-089
$210.00 $172.30
"Surface Grinder Accessories Safety Dust Shields Safety and Dust Shield assembly kit ~ Dual Head Grinders. -->>>> FREE FREIGHT Only When Ordered with Multiquip Equipment, If not see UPS Chart at Check Out!"


Home • Contact Us •  Leasing
 

Click here to read our Ordering and Shipping policy
prior to placing any order via Internet or by Phone!

Please Read: Ordering, Billing & Shipping Policies & Information Prior To Placing An Order By Phone Or Over The Internet

Pictures for reference only, actual products may vary!

Prices Subject to change without notice.
Smith Hamilton reserves the right to refuse any order placed on this Web Site.
25% restocking charge may be applied to all return orders

©2000-2008 Southern Tool