SuperMax SuperBrush 24, 36 And 49 Wire Brush

At a Glance
single drum
double drum
faq

Models and Accessories
MX-91267	SuperBrush 24 220V, 1Ph (includes 1 brush and caster set)
MX-93267-2	SuperBrush 24x2 Double Brush Sander, 3Ph (includes 2 brushes, caster set, and ProScale DRO)
MX-91367	SuperBrush 36 220V, 1Ph (includes 1 brush and caster set)
MX-93367-2	SuperBrush 36x2 Double Brush Sander, 3Ph (includes 2 brushes, caster set, and ProScale DRO)
MX-93497	SuperBrush 49 220V, 3Ph (includes 1 brush, caster set, and ProScale DRO)
MX-93497-2	SuperBrush 49x2 Double Brush Sander, 3Ph (includes 2 brushes, caster set, and ProScale DRO)
210376	Fits SUPERBRUSH Sanders and 25x2, 37x2
Brush Heads and Abrasives 24 inch Brush Heads
MX-60-0124	BRUSH, NYLON 24 inch - 22MIL/120G DS
MX-60-0083	BRUSH NYLON 24 inch -MEDIUM-40MIL/80G-DS
MX-60-0061	BRUSH NYLON 24 inch -HEAVY-45MIL/60G-DS
MX-60-0061-1	BRUSH NYLON 24 inch - EXTRA HEAVY-45/60G-DSS
MX-60-0054	BRUSH WIRE 24 inch -LIGHT-OWS .016 CS
MX-60-0055	BRUSH WIRE 24 inch -HEAVY- OWS .020 CS
MX-60-2555	24 inch Dovetail Hub 36 Sl w/ gangs TW (hub only, needs abrasive strips)
24 inch Abrasive strips
MX-60-2601	Sanding Strips, 60 Grit, SB 24 inch
MX-60-2602	Sanding Strips, 80 Grit, SB 24 inch
MX-60-2603	Sanding Strips, 120 Grit, SB 24 inch
MX-60-2604	Sanding Strips, 150 Grit, SB 24 inch
MX-60-2605	Sanding Strips, 180 Grit, SB 24 inch
MX-60-2606	Sanding Strips, 220 Grit, SB 24 inch
MX-60-2607	Sanding Strips, 320 Grit, SB 24 inch
36 inch Brush heads
MX-60-3121	BRUSH NYLON 36 inch-LIGHT- 22MIL/120G DS
MX-60-3082	BRUSH NYLON 36 inch-MEDIUM-40MIL/80G-DS
MX-60-3062	BRUSH NYLON 36 inch-HEAVY-45MIL/60G-DS
MX-60-3062-1	BRUSH NYLON 36 inch - EXTRA HEAVY-45/60G-DSS
MX-60-3054	BRUSH WIRE 36 inch -LIGHT-OWS .016 CS
MX-60-3052	BRUSH WIRE 36 inch -HEAVY- OWS .020 CS
MX-60-2565	36 inch Dovetail Hub 36 Sl w/ gangs TW (Hub only, needs abrasive strips)
36 inch Abrasive Strips
MX-60-2801	Sanding Strips, 60 Grit, SB 36 inch
MX-60-2808	Sanding Strips, 80 Grit,SB 36 inch
MX-60-2809	Sanding Strips-120 Grit,SB 36 inch
MX-60-2804	Sanding Strips, 150 Grit, SB 36 inch
MX-60-2811	Sanding Strips, 180 Grit, SB 36 inch
MX-60-2805	Sanding Strips, 220 Grit, SB 36 inch
MX-60-2807	Sanding Strips, 320 Grit, SB 36 inch
49 inch Brush Heads
MX-60-3504	BRUSH NYLON 49 inch-LIGHT- 22MIL/120G DS
MX-60-3502	BRUSH NYLON 49 inch-MEDIUM-40MIL/80G-DS
MX-60-3513	BRUSH NYLON 49 inch-HEAVY-45MIL/60G-DS
MX-60-3513-1	BRUSH NYLON 49 inch - EXTRA HEAVY-45/60G-DSS
MX-60-3501	BRUSH WIRE 49 inch -LIGHT-OWS .016 CS
MX-60-3512	BRUSH WIRE 49 inch -HEAVY- OWS .020 CS
MX-60-2580-2	49 inch Hub 36 Slots CMB aluminum (Hub only, needs abrasive strips)
49 inch Abrasive strips
MX-60-2901	Sanding Strips, 80 Grit, SB SP 49 inch
MX-60-2903	Sanding Strips, 120 Grit, SB SP 49 inch
MX-60-2904	Sanding Strips, 180 Grit, SB SP 49 inch
MX-60-2905	Sanding Strips, 220 Grit, SB SP 49 inch
MX-60-2907	Sanding Strips, 320 Grit, SB SP 49 inch

SuperBrush Single Brush Sanders 24ÃÆÃÂ¢ÃÂ¢Ã¢â¬Å¡ÃÂ¬ÃâÃÂ³, 36ÃÆÃÂ¢ÃÂ¢Ã¢â¬Å¡ÃÂ¬ÃâÃÂ³, & 49ÃÆÃÂ¢ÃÂ¢Ã¢â¬Å¡ÃÂ¬ÃâÃÂ³

SuperBrush Single Brush Sanders 24, 36, and 49 inches

Overview

SuperMax Tools offers a wide variety of SuperBrush sanders to meet the many needs of any woodworking shop. Our goal is to provide an excellent priced machine yielding an incredible return on investment by creating faster output, reduced rework, and greater product consistency.

Just think of all the applications our machines can help with here a just a few:

Raw Wood Sanding | White Wood Sanding
Break sharp edges
Blend out minor defects
Sealer Sanding
Primer Sanding
Scuff Sanding
Profile sanding
Clean reclaimed wood
Wire brushing to pull out soft grain to create textured surface

These easy to use machines come with an extremely low learning curve and offer many different features which include: quick change brush heads, infinitely variable brush and conveyor speeds to allow for endless finish possibilities, adjustable tension rollers to prevent stock slippage, and precision height adjustments. Our SuperBrush sanders come in sizes ranging from 24 to 49 inches with single and/or double brush head offerings to meet all your finishing needs.

Its also available with two brush heads.

SuperBrush Benefits

The SuperBrush has these great benefits over hand finishing:

Faster output
Reduce rework
Greater surface consistency

Dozens of brush heads available to effectively sand a wide variety of applications.

Raw Wood Sanding | White Wood Sanding
- Break sharp edges
- Open grain for even finish absorption
- Blend out minor defects
Sealer Sanding | Primer Sanding | Scuff Sanding
- Removes raised fibers and grain (denib/defuzz)
Degloss previously finished wood
Clean reclaimed wood
Wire brushing
- Distress (weathered/Southwest finish)
- Pull out soft grain to create textured surface

Specifications
Sanding Capacity	Maximum Width (in): 24, 36, or 49 Minimum Length (in): 10 Maximum Thickness (in): 11, varies with brush style Minimum Thickness (in): 1/32
Dimensions HxWxD (in):	24 inch model: 52 x 46 x 35 36 inch model: 52 x 58 x 35 49 inch model: 50 x 71 x 31
Brush (in):	9 - 11 typical diameter
Typical Bristle Length:	1-1/2 - 3 inch
Speed:	ranged variable, 400-1200 RPM brush
Dust Hood:	24 inch model: steel with hinged back, two (2)) 4 inch vacuum port, 1200 CFM min. 36 inch model: steel with hinged back, three (3) 4 inch vacuum ports, 1800 CFM min. 49 inch model: steel with hinged back, three (3) 4 inch vacuum ports, 1800 CFM min.
Drive Motor (TEFC):	24 and 39 inch model: 5HP 49 inch models: 7-1/2HP
Power Requirements:	208-230V, 60HZ; 1 PH, 30 amp service; 3 PH, 20 amp service
Shipping Weight (lbs):	24 inch model: 525 36 inch model: 605 49 inch model: 775
Conveyor Motor:	Direct Drive D.C motor, infinitely variable, 0-15 FPM 24 inch model: 100 in.-lb. torque 36 inch model: 100 in.-lb. torque 49 inch model: 200in.-lb. torque

SuperBrush Double Brush Sanders 24ÃƒÆ’Ã¢â‚¬â€2, 36ÃƒÆ’Ã¢â‚¬â€2, 49ÃƒÆ’Ã¢â‚¬â€2

SuperBrush Double Brush Sanders 24×2, 36×2, 49×2 inches

Overview

Just think of all the applications our machines can help with here a just a few:

Raw Wood Sanding
White Wood Sanding
Break sharp edges
Blend out minor defects
Sealer Sanding
Primer Sanding
Scuff Sanding
Profile sanding
Clean reclaimed wood
Wire brushing to pull out soft grain to create textured surface.

It’s also available with a single brush head.

Dozens of brush heads available to effectively sand a wide variety of applications.

Raw Wood Sanding | White Wood Sanding
- Break sharp edges
- Open grain for even finish absorption
- Blend out minor defects
Sealer Sanding | Primer Sanding | Scuff Sanding
- Removes raised fibers and grain (denib/defuzz)
Degloss previously finished wood
Clean reclaimed wood
Wire brushing
- Distress (weathered/Southwest finish)
- Pull out soft grain to create textured surface

Specifications
Sanding Capacity:	Maximum Width (in): 24, 36 or 49 Minimum Length (in): 11 Maximum Thickness (in): 9, varies with brush style Minimum Thickness (in): 1/32, varies by application
Dimensions HxWxD (in):	24 inch model: 67 x 46 x 54 36 inch model: 67 x 58 x 54 49 inch model: 50 x 71 x 31
Brush (in):	9-12 typical diameter
Typical Bristle Length:	1-1/2 - 3 inch
Speed:	ranged variable, 400-1200 RPM brush
Dust Hood: (steel with hinged back)	24 inch model: Four (4), 4 inch vacuum ports, 1800 CFM min. 36 inch model: Six (6), 4 inch vacuum ports, 1800 CFM min. 49 inch model: Six (6), 4 inch vacuum ports, 2400 CFM min.
Conveyor Motor:	220 in.-lb. torque, direct drive D.C. motor, ranged variable 0-30 FPM
Drive Motor (TEFC):	24, 36 inch models: (2) 7-1/2HP 49 inch models: (2) 10HP
Power Requirements:	24 inch, 36 inch models: 208-230V, 60HZ, 3 Ph, 20 amp service (2) 49″ model:208-230V, 60HZ, 3 Ph, 30 amp service (2)
Shipping Weight (lbs):	24 inch model: 1100 36 inch model: 1340 49 inch model: 1550

What is a SuperBrush brush sander?

A SuperBrush brush sander is a machine that can be equipped with different types of sanding heads to achieve a wide variety of finishes on wood or plastic composite material. It is commonly used for applications that would traditionally be done by hand, such as profile sanding mouldings or raised panel doors, or to achieve labor-intensive finishes like distressing. Unlike a drum sander which can only dimension a flat surface, the bristles on the brushes flex and bend to conform to profiles.

What do the different types of brush heads do?

The main categories of brush heads are flatter, nylon, and wire. There are many variations of brush heads within those categories, resulting in dozens of brush head options. For example, using a flatter style brush will help you to achieve a hand-sanded finish on profiles like mouldings and raised panel doors. It is also commonly used in raw wood sanding to open the grain for stain, and then used for sealer sanding in between coats of stain or primer simply by changing the grit of flatter strip. Wire brushes are most commonly used to achieve a distressed or weathered finish. Nylon brushes work well for cleaning reclaimed wood or light distressing. These are just a few of the different applications for each brush type.

What are some of the benefits of a SuperBrush?

Increase Output: SuperBrush sanders are able to run material up to 30ft a minute (depending on the model you choose), much faster than sanding by hand!

Increase Consistency: When hand sanding, an employee is likely going to produce a different result at 8 a.m than he is at 5 p.m. With a SuperBrush sander, the results are the same time after time.

Low Learning Curve: A SuperBrush sander is not difficult to operate. After a short training period, nearly anyone can run a SuperBrush sander.

Versatility: Perhaps the biggest benefit of a SuperBrush sander is its versatility. Vastly different finishes can be achieved by changing the brush head, or more finite changes can be achieved by changing the speed of the conveyor, the RPM of the brush head, or the depth of bristle penetration.


SuperBrush 24 220V, 1Ph (includes 1 brush and caster set)	SuperBrush 36 220V, 1Ph (includes 1 brush and caster set)	SuperBrush 49 220V, 3Ph (includes 1 brush, caster set, and ProScale DRO)	SuperBrush 24x2 Double Brush Sander, 3Ph (includes 2 brushes, caster set, and ProScale DRO) (Superbrush 24x2 shown)

SuperMax SuperBrush 24", 36" And 49" Wid

SuperBrush Single Brush Sanders 24, 36, and 49 inches

Overview

SuperBrush Benefits

Overview