|
Shown with optional accessories
 |
50 x 2 Drum Sander
-
Continuousduty 7-1/2HP motor, 208 - 230
Volt power, single or 3 phase
-
SandSmart™ automatic control of the
infinite-variable feed rate of the conveyor (0-15
ft./min.)
-
Precisely dimension stock within .010”
across width of sander
-
Magnetic starter
-
Multiple grit sanding in a single pass
-
50” wide, dual (x 2) drum sanding
capacity
-
Casters included, (wheel and swivel
lock)
-
Electric height adjustment, high speed
and adjustable speed
-
ProScale depth gauge (DRO) insures
proper dimensioning
-
Precision-flattened steel conveyor bed
reinforced with four steel cross sections for no “flex”
-
Self-cooling drum with abrasive Take-up
Fasteners, make changing abrasives quick and easy and
keeps abrasives tight
-
Sand stock as short as 3-1/2” as thin as
1/32” and as thick as 12”
-
Cast stand zinc-plated steel bed, center
less ground column tubes
-
Minimum of 1800 CFM dust collection
recommended
-
Shipped assembled, some minimal assembly
required
-
Drum ball bearings are sealed and
permanently lubricated
PROSCALE™
- Displays how much material is being removed per pass
- Displays zero when the desired thickness is reached
- Displays the actual thickness of the stock as it
exits the sander
- Standard on 220 Volt Series 50x2 drum sanders
(Optional on all other models)
|
|
Sanding Capacity |
| Maximum Width (in): |
50 |
|
Minimum Length (in): |
3 1/2 |
| Maximum Thickness (in): |
12 |
|
Minimum Thickness (in): |
1/32 |
| Dimensions (H x W x
D/in): |
50 x 71 x 31 |
|
Extruded Aluminum Drums: |
5 x
50 (2) |
| Drum Speed: |
1600 RPM |
|
Dust hood: |
Hinged back steel with 3 -4: vacuum ports |
| Height
Adjustment (in): |
Power and manual
controls, 2/32 per turn; ProScale™ digital read-out
and locking stop included |
|
Ball Bearings (1") |
4 |
| Conveyor
Motor: |
SandSmart™ controlled
220 in. - lb. torque, direct drive D.C. motor,
Infinitely variable 0-15 feet per minute |
|
Drive Motor (TEFC): |
7 1/2
HP, 1740 RPM; 208-230V, 60Hz; continuous-duty. |
| Power
Requirements: |
1 Ph, 50 amp service
3 Ph, 30 amp service |
|
Shipping Weight (lbs): |
820 |
|
220 Volt Models
-
750102 - SuperMax 50x2 dual drum,
1 Ph
-
750302 - SuperMax 50x2 dual drum,
3 Ph
Optional Accessories
-
59120 - Abrasive Cleaning Stick
-
61-1010 - 50" Poly Conveyor Belt
-
61-1007 - 37" Poly Conveyor Belt
-
98-0070 - Rack-N-Roll (Abrasive
Storage Shelf)
-
"Pre-Marked" Abrasives - 24 to 220 grit
|
|
|
SMT750102
$10,500.00 $10,290.00 
50x2 Double Drum 220V- 1PH DRUM SANDERS >>>> Call 1-800-458-3687 for Freight Rate on this item!
|
SMT750302
$10,500.00 $10,290.00
50x2 Double Drum 220V- 3PH DRUM SANDERS >>>> Call 1-800-458-3687 for Freight Rate on this item!
|
SMT60-0350
$190.00
Abrasive Conveyor Belt 50 >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM
|
SMT60-8024
$175.00
"24 Grit: Klingspor Blue, Pre-Marked Rolls Pre-MarkedZirconium (2-5 times longer life over Aluminum Oxide) Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM"
|
SMT60-8036
$175.00
"36 Grit: Klingspor Blue, Pre-Marked Rolls Pre-MarkedZirconium (2-5 times longer life over Aluminum Oxide) Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM"
|
SMT60-8050
$175.00
"50 Grit: Klingspor Blue, Pre-Marked Rolls Pre-MarkedZirconium (2-5 times longer life over Aluminum Oxide) Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM"
|
SMT60-8060
$175.00
"60 Grit: Klingspor Blue, Pre-Marked Rolls Pre-MarkedZirconium (2-5 times longer life over Aluminum Oxide) Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM"
|
SMT60-8080
$175.00
"80 Grit: Klingspor Blue, Pre-Marked Rolls Pre-MarkedZirconium (2-5 times longer life over Aluminum Oxide) Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM"
|
SMT60-8120
$175.00
"120 Grit: Klingspor Blue, Pre-Marked Rolls Pre-MarkedZirconium (2-5 times longer life over Aluminum Oxide) Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM"
|
SMT60-9036
$120.00
36 Grit: Premium Pre-Marked Rolls Pre-Marked Aluminum Oxide Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM
|
SMT60-9060
$120.00
60 Grit: Premium Pre-Marked Rolls Pre-Marked Aluminum Oxide Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM
|
SMT60-9080
$120.00
80 Grit: Premium Pre-Marked Rolls Pre-Marked Aluminum Oxide Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM
|
SMT60-9100
$120.00
100 Grit: Premium Pre-Marked Rolls Pre-Marked Aluminum Oxide Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM
|
SMT60-9120
$120.00
120 Grit: Premium Pre-Marked Rolls Pre-Marked Aluminum Oxide Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM
|
SMT60-9150
$120.00
150 Grit: Premium Pre-Marked Rolls Pre-Marked Aluminum Oxide Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM
|
SMT60-9180
$120.00
180 Grit: Premium Pre-Marked Rolls Pre-Marked Aluminum Oxide Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM
|
SMT60-9220
$120.00
220 Grit: Premium Pre-Marked Rolls Pre-Marked Aluminum Oxide Abrasive Paper >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM
|
SMT98-0118
$500.00
ProScale¿ DRO (digital read out) Depth Gauge >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM
|
SMT98-0025
$250.00
"Lowrider Legs* with 4 Casters (lowers machine 5-1/2"") >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM"
|
SMT98-0130
$89.00
Caster Set - Box of (4) >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM
|
SMT98-0070
$38.00
Rack'N Roll (Abrasive storage shelf) >>>> FREE Freight When Added to a SMT Machine Order or See UPS Chart at Checkout!9:06 AM
|
SMT98-0060
$8.99
"Kit, Tuftool >>> Freight Paid ONLY when ordered with a Super Brush machine, Otherwise see UPS chart for Shipping Costs."
|
