SuperMax 25" and 37", Single and Double Drum at Southern Tool Catalog

37 x 2 Shown with optional accessories

Single And Double Drum 25" and 37"

Continuous-duty 5HP motor, 208- 230 Volt power, single or 3 Phase
SandSmart™ automatic control of the infinite-variable feed rate (0-15 ft./min.) for the conveyor gives a perfect finish
Multiple grit sanding in single pass with double drum models
Precisely dimension stock within .010” across width of sander
25” or 37” wide sanding capacity
Height of the rear drum is independently adjustable in relationship to the front drum
Optional ProScale depth gauge al- lows incredible accuracy
Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex”
Self-cooling drum with abrasive Take- Up-Fasteners make changing abrasive quick and easy plus keeping abrasives tight
Sand as thick as 12” with 37” models and 6” with 25” models Sand as thin as 1/32” and as short as 2-1/4” (single drum) 3-1/2” (double drum) models
Cast stand, zinc-plated steel bed, centerless ground column tubes
Dust Collection- mandatory for all models: 25” - 600 CFM min., 37” 1200 CFM min.
Shipped assembled, some minimal assembly required
Drum ball bearings are sealed and permanently lubricated

Sand Smart Control

Eliminates the guess-work of manually controlling the infinitely-variable feed speed
Simplifies the sanding operation
Provides a consistent finish even with varying grain pattern and density
Greatly increases abrasive planing and dimensioning speed.
Maintains highest possible feed rate without overload
Standard on all 220 Volt Series drum sander models

Sanding Capacity
Maximum Width (in):	25 or 37
Minimum Length (in):	2 1/4 single drum or 3 1/2 double drum
Maximum Thickness (in):	6-25" model or 12-37" model
Minimum Thickness (in):	1/32
Dimensions (H x W x D/in):
Model 25 & 25x2	43 x 46 x 31
Model 37x2	43 x 58 x 31
Extruded Aluminum Drum(s):
25" Model: 1 or 2	5 x 25
37" Model: 1 or 2	5 x 37
Drum Speed:	1600 RPM
Dust Hood:
25" Model:	Hinged back steel with 1 - 4" vacuum port
37" Model:	Hinged back steel with 2 - 4" vacuum ports
Height Adjustment (in):	3/32 per turn, DepthGauge with locking stop
Ball Bearings (1")	2 per drum (2 or 4)
Conveyor Motor:	SandSmart™ controlled 100"-lb. torque, direct drive D.C. motor, Infinitely variable 0-15 feet per minute
Drive Motor (TEFC):	5 HP, 1740 RPM; 208-230V, 60 Hz; continuous-duty
Power Requirements:	1 Ph, 30 amp service 3 Ph, 20 amp service
Shipping Weight (lbs):
25" Model:	405
25" x 2 Model:	435
37" Model:	450
37" x 2 Model:	485

220 Volt Models

Optional Accessories