|
|
FRAME SPECIFICATIONS: |
|
NET DIMENSIONS (METRIC) |
PACKED DIMENSIONS |
| Model |
L |
W |
H |
Weight |
L |
W |
H |
Weight |
Cubic Ft |
| LR130EL |
39 (99) |
26 (66) |
29.5 (75) |
380 (173) |
42 (107) |
40 (102) |
34.5 (88) |
420 (190) |
33.5 |
|
Model: |
LR130EL |
| Maximum
Surge Watts |
13000 |
| Rated Continuous Watts |
12000 |
|
Voltage |
120/240 |
| Amps Rated |
100 @ 120v -
50 @ 240v |
|
Frequency |
60 Hertz |
| Phase |
1 |
| Rpm |
3600 |
| Receptacles: |
Plugs Required for Receptacle (Not Supplied) |
|
- 4-20 Amp, 120V, GFI Nema, 5-20R, Straight Blade
Type With (2 GFIs, 4 Outlets) |
5-15P or 5-20P |
|
- 1-30 Amp, 120V, Twistlock, Nema L5-30R |
L5-30P |
|
- 1-30 Amp, 240V, Twistlock, Nema L14-20R |
L14-20P |
|
- 1-50 Amp, 240V, Twistlock, CS6369 |
CS6365C (1 Supplied With Unit) |
|
Main
Circuit Breaker and Circuit Breaker Protection For
Each Receptacle |
Standard |
| Voltmeter |
Standard |
|
Hour Meter (Elapsed Time) |
Standard |
| Fuel
Tank |
8 Gallons |
| -Run
Time 1/2 Load |
9.6 Hours |
| -Run
Time Full Load |
8 Hours |
| Engine |
19HP
Lombardini 25LD425 |
| -Displacement |
654cc |
| -Electric Start |
Standard |
| -Low Oil
Pressure Shut Down |
Standard |
| -Fuel
Injection |
Standard |
| -Twin
Cylinders |
Standard |
| -Cold
Start Kit |
Standard |
|
Decibels (Average Values) |
81 DBA
at 7 Meters |
|
Frame:
1" Welded steel roll cage frame with isolated recessed control panel
with heavy duty vibration isolators (Lifting hook standard on model
LR130EL).
Generator type totally brushless with capacitor, copper windings
voltage plusTM, <6% distortion, exclusive smooth waveTM,
csa listed, air cooled. Electric start
models are shipped less battery. Required battery 300 cold cranking
Amps, 5" Maximum width. Battery Type U1 12 Volts DC. |
|
