Model 963
Rotary Pump - Fits 15 to 55 gallon drums with 2" bung
opening. Dispenses gasoline, diesal fuel and similar light petroleum products.
Constructed of cast iron. Includes telescoping tube assembly 2" NTP bung
adapter, 3/4" threaded NPT discharge spout, 8 ft. X 3/4" rubber hose
nozzle. Dispenses 7.5 gallons per 100 revolutions
Model 352
Hand Pump - fits 5 through 6 1/2 gallon pails. Features a
48" vinyl discharge hose with curved metal spout at the discharge end,
steel suction tube with plastic extension, standard bung adapter for external
threads, special bung adapter for Rieke spout, and drain back for curved metal
spout with standard bung adapter. Dispenses approximately 1 quart per 15 strokes
Model D-S1
Drum Pump - same as MODEL D-S except is equipped with MODEL D01
non-drip attachment
Model D01
Non-drip attachment for drum pumps with garden hose thread on
discharge spout
Model 366
Barrel Pump w/o hose - fits 15 through 55-gallon drums with
2" bung opening. Has zinc die-cast piston with brass piston ring. Includes
bung adapter and curved discharge spout. Discharge spout can be rotated 180 °
and can be removed to expose garden hose threaded outlet. Dispenses
approximately 1-1/2 pints per stroke
Model 366T
Barrel Pump - same as MODEL 366 except unpainted and with
lacquer thinner rod packing
Model 381
Barrel Pump - fits 15 through 55-gallon drums with 2" bung
opening. Has a zinc die-cast piston with two brass rings, steel telescoping tube
assembly, Buna N Seals, plastic handle grip, and curved discharge spout with
garden hose threads. Dispenses approximately 1 pint per stroke. Has adjusting
nut on bung threads.
Model 382
Barrel Pump - same as MODEL 381 except is equipped with MODEL D01 non-drip
attachment.
Model 155
Drum Pump - fits 55-gallon drums with 2" bung opening. Includes
pump, bung adapter, and 5 feet of clear vinyl hose with curved discharge nozzle.
Can be furnished with a MODEL 1500 universal pint meter by special order at
additional cost
Model 15-30
Drum Pump - Fits 15 through 30 gallon drums with 2" bung
opening. Includes bung adapter, 5 feet of clear vinyl hose with curved discharge
nozzle. Dispensing rate of 3 ounces per stroke
Model 321
Lube Pump - fits full open head pails 5 through 6 ½ gallons.
Includes pump, pail cover, and 4 feet of clear vinyl hose with curved discharge
nozzle. Can be furnished with MODEL 1500 universal pint meter by special order
at additional cost.
Model 362
Nylon Pump w/o hose - fits 5 to 6 gallon pails with 2 1/8" max
opening outside diameter. Constructed of nylon and nickel plated steel. Can be
used with mild thinners and solvents. Includes special plastic bung adapter and
discharge spout. Spout can be removed and special hose attached. Dispenses
approximately 8 oz. per stroke.
Model 321M
Lube Pump. Same as MODEL 321 except has a rubber gasket on underside
of cover and a marine fitting on the hose end (as opposed to a standard curved
nozzle), which provides a seal between the nozzle and the opening in the lower
gear box housing. The ideal pump to dispense lubricant into the lower gear box
housing of an outboard marine engine
Model 321R
Lube Pump - fits full open head pails 5 through 6 1/2 gallons.
Includes pail cover, 4ft. of clear rubber hose with curved discharge spout. Can
be furnished with MODEL 1500 universal pint meter by special order at additional
cost
Model 336-WMF
Lube Pump - fits 120 lb. open head drums. Includes drum cover, 5ft.
of clear vinyl hose with curved discharge spout, and universal pint meter
Model 336
Lube Pump - fits 120 lb. full open head drums. Includes pump, drum
cover, and 5' of clear vinyl hose with curved discharge nozzle
Model 338
Transfer Pump - fits 15 through 55-gallon drums. Dispensing rate of 2
ounces per stroke. Includes pump, bung adapter, and discharge spout with garden
hose threads
Model 1208
Gear Lube Pump - fits 120 lb. open head drums. Includes pump, drum
cover, 5' (longer hoses not recommended) of medium pressure oil hose, non-drip
curved discharge nozzle, MODEL 1500 universal pint meter, and MODEL 120-S drum
dolly
Model 1209
Gear Lube Pump - Fits 120 lb. open head drum. Includes drum cover, 5
ft. (longer hoses not recommended) of medium pressure oil hose, non-drip curved
discharge nozzle, drum dolly
Model 363
Nylon Pump w/o hose - fits 15 through 55-gallon drums with 2"
bung opening. Constructed of nylon and nickel plated steel. Can be used with
paint thinners and general solvents. Includes bung adapter and discharge spout.
Spout can be removed and special hose attached. Dispenses approximately 8 oz.
per stroke.
Model 372
Siphon Pump - fits 55-gallon drums with 2" bung opening.
Constructed of polyethylene. Dispensing rate of 1 pint per 5 strokes. Can be
used with water and light oil or other light fluids Not corrosive to
polyethylene. Siphons to a lower level or pumps to higher level
Model 369
Polyethylene Pump - fits 55-gallon drums with 2" bung opening.
Constructed of polyethylene and PVC. Can be used with mild acids, light oils,
water based fluids and other materials which are Not corrosive to polyethylene
and PVC. (Do Not use with lacquer thinners.) Dispensing rate of 1 pint per 5
strokes. Siphons to a lower level or pumps to higher level. Siphoning is
controlled by air vent on top
Model D-S
Drum Pump w/o hose - fits 15 through 55-gallon drums with a 2"
bung opening. Has a zinc die-cast piston with two brass piston rings, steel
telescoping tube assembly, Buna N seals, plastic handle grip, and curved
discharge spout with garden hose threads. Dispenses approximately 1 pint per
stroke. Attractive red enamel finish
|
