If you're looking for a space-saving shaper for your shop, the new JET JWS-25CS Shaper is what you need. This compact powerhouse features a 8000 and 10000 RPM reversing 3HP motor. The large 25" by 25" precision ground cast iron table provides a large, durable, work area. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independent left and right fences feature micro-adjustment, and a built in 4ââ¬Â dust port. If you feel you just donââ¬â¢t have the space, the nominal 23" x 25" footprint of this workhorse is sure to change your mind. Put the new JET JWS-25CS Shaper in your shop today, you'll know why JET products are "Built Better to Build Better."
Part Number | 708322 |
Spindle Speed | 8000 and 10,000 RPM |
Spindle Diameter | 1/2 and 3/4 " |
Spindle Size Under Nut | 1/2 (2 3/4) and 3/4 (3) " |
Spindle Travel | 3 |
Table Size | 25 x 25 " |
Table Height From Floor | 34 " |
Table T-Slot | 3/4 x 3/8 " |
Table Opening Diameter | 6 7/8 " |
Table Insert Opening Diameter | 1 5/8, 3 and 3 1/2 " |
Fence Size (L x H) | 9 1/2 x 2 3/4 " |
Router Bit Collet Diameter | 1/4, 3/8 and 1/2 " |
Dust Port Outside Diameter | 4 " |
Motor Power | 3 HP |
Motor Voltage | 230 V |
Prewired Voltage | 230 V |
Motor Current | 16 A |
Motor Phase | 1 Ph |
Family Description | 3HP WOODWORKING SHAPER |
Model Number | JWS-25CS |
Brand | Jet |
Overall Dimensions | 25 x 25 x 44 |
Height | 40 inch |
Width | 29 inch |
Length | 23 inch |
Net Weight | 338 pound |
![]() |
WARRANTY AND SERVICE WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jetî tools. For the name of an Authorized Service Center in your area call 1-800-274-6848. |
Accessories for the JWS-25X | |
---|---|
708118 | JMB-UMB, Universal Mobile Base |
708318 | Spindle 1" for JWS-25X Shaper |
708387 | Spindle 3/4" for JWS-25X Shaper |
708388 | Spindle 1/2" for JWS-25X Shaper |
708382 | Spindle 30mm for JWS-25X Shaper |
708383 | Collet Set 1/4" for JWS-25X Shaper |
708384 | Collet Set 1/2" for JWS-25X Shaper |