The Baileigh Industrial PH-19 power hammer is the little brother to the MH-19 Power Hammer . The PH-19 can do many of the same functions as the MH-19, shrink, stretch, dome, edge turn, bead, offset, but at a price that fits any budget. The PH-19 also accepts all readily available MH-19 tooling.
Specifications | |
---|---|
Model | PH-19 |
Capacity Mid Steel
|
16 ga
|
Capacity Aluminum
|
12 ga
|
Throat Depth
|
19"
|
Tooling Height Adjustment
|
5"
|
Speed (variable)
|
0 - 1700 beats/minute
|
Power Requirement
|
120
|
Tooling | |
---|---|
PHD-ST-BT{00 | 1.5 RADIUS LOWER DIE, 2.0DIA. |
PHD-ST-BT{01 | 2.0 RADIUS LOWER DIE, 2.0DIA. |
PHD-ST-BT{02 | 3.0 RADIUS LOWER DIE, 2.0DIA. |
PHD-ST-BT{03 | 6.0 RADIUS LOWER DIE, 3.0DIA. |
PHD-ST-BT{04 | 8.0 RADIUS LOWER DIE, 3.0DIA. |
PHD-ST-BT{05 | 12.0 RADIUS LOWER DIE, 3.0DIA. |
PHD-ST-BT{06 | 24.0 RADIUS LOWER DIE, 3.0DIA. |
PHD-ST-BT{07 | 36.0 RADIUS LOWER DIE, 3.0DIA. |
PHD-ST-BT{08 | 1.0F X 6.0R LOWER PLANISHING, 3.0DIA. |
PHD-ST-TO{00 | P-FLAT}Master Flat Top Die, 3.0"dia |
PHD-ST-TO{02 | RUBBER TOP DIE, 80 DUROMETER, 3.0DIA. |
PHD-UTHS-{00 | UNIV. TOOL HOLDERS (2) .5 OPENING, 2.0DIA. |
PHD-ST-BT{09 | .5 LINEAR LOWER STRETCH DIE, 3.0DIA. |
PHD-BDS-0250 | 1/4" Beading Dies (2) |
PHD-SH-ME{00 | MECHANICAL SHRINK DIES (2) 1 X 2 |
PHD-ST-ME{00 | MECHANICAL STRETCH DIES (2) 1 X 2 |
PHD-THDS-V4 | Thumbnail Shrink Dies (2) 3.0"dia. |
CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER -IN LAW DEAL ON THIS BAILEIGH ITEM