Tungsten Carbide Saw CS-70NC
Made in Taiwan
Do you have a machine shop that needs to cut a lot of solid material to length before machining? If so the CS-70NC tungsten carbide saw is for you. Designed to cut solid high alloy, carbon, non-ferrous, and tool steel grade materials or heavy wall tubing accurately and efficiently, the CS-70NC will take all the abuse that a production environment can throw at it. The maximum capacity of the CS-70NC is 2-3/4 inch solid with an 11 inch carbide blade.
The CS-70NC is a true production saw that includes a 19 foot in feed table. This table can hold up to 5500 pounds of material and includes its own set of hydraulics to lift one piece of stock at a time and load it to the automatic feeding vise. Once the bar has been loaded, a sensor senses that end of the stock and feeds the bar to the cutting vise to square the end up before production cutting will begin. When actual production cutting begins the CS-70NC is accurate to .002 inch.
The cutting head of the CS-70NC is a feet of engineering in itself. It utilizes a heavy duty design that has the carbide saw blade mounted to a ridged blade containment system that is tied to a heavy hydraulic pivot system. This heavy containment system and pivot allow for little vibration during the cut and an included mist coolant system helps produce the highest tolerances and best surface finish.
Operation of the CS-70NC is a breeze. A user friendly touch screen controller handles all functions of the carbide cut off saw as well as alerts the operator to any potential problems that may arise during the cutting process. Safety interlocks are also included to ensure the CS-70NC tungsten carbide saw as safe as possible.
|Max. Blade Diameter||11 inch|
|Operation||Automatic with Magazine Feeder|
|Round Solid at 90 degree||2.75 inch|
|Rectangle Tube at 90 degree||2.36 x 2.36 inch|
|Square Tube at 90 degree||2.36 x 2.36 inch|
|Round Tube at 90 degree||2.75 inch|
|Vice Style||Single Action with Hydraulic Feed|
|Max. Vice Opening||3.5 inch|
|Arbor Size||1.26 inch|
|Blade Speed||Inverter Driven, 17 - 200 (rpm)|
|Power||220V / 3-phase|
|Shipping Weight||5,800 lbs.|
Crate 1 - 195 x 44 x 64 inch /
Crate 2 - 135 x 90 x 102 inch
|Cutting Capacity - Model: CS-70NC|
|2.36" x 2.36"||N/A|
|2.36" x 2.36"||N/A|
220V 3PHASE TUNGSTEN CARBIDE AUTOMATIC SAW. 10 BLADE OD. 2.55 ROUND CAPACITY @ 90 DEGREES.
Mfg. item #: CS-70NC
lease to own for as little as:$2,180 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1