Hydraulic Ironworker SW-132
Made in Taiwan
Baileigh Industrials biggest all vertical ironworker is the SW-132. This behemoth has 132 tons of punching and 179 tons of shearing and notching power. It is also a dual operator machine, meaning two workers can work on opposite sides of the machine without a loss in power. To achieve such power the SW-132 boasts a 220 Volt three phase 15 hp motor to power the industrial grade hydraulic system. The SW-132 is truly a workhorse and will be at home in any size shop.
The SW-132 is a five station ironworker with stations for punching, notching, flat bar shearing, angle shearing, and bar shearing. Like most Baileigh Industrial hydraulic ironworkers the SW-132 uses the best design in the industry and uses vertical motion at each station. This type of machine eliminates the harsh snap in the punching station common on other brands. By eliminating the harsh snap the machine has less fatigue on it and the tooling lasts much longer. The punching station on the SW-132 ironworker comes standard with seven sets of punches and dies as well as an oversized work table that has material stops and is scaled for easy setup.
The Baileigh Industrial SW-132 hydraulic ironworker was been designed and built to the highest quality standards in the industry. No corners were cut; the frame is fully welded for rigidity and hydraulic clamps were added to the shearing station to hold everything in alignment. This eliminates any lifting of the material when shearing, extending blade life and providing a square sheared part. Other great features of the SW-132 are an electric back gauge, swing away stripper, oversized work tables, foot pedal operation, and waste buckets.
The SW-132 also has optional tooling such as press brakes, pipe notchers, channel and I-beam shears, and others are available. Call a Representative for more details.
|Round Bar Shear||1.75 inch|
|Rectangle Notcher W x D x T||2 x 3.5 x .5 inch|
|Single Vee Press Brake L x T||9.875 x .75 inch|
|Punch Capacity||1.125 x 1.062 inch|
|Punching Pressure||132 Tons|
|Pipe Notching||4.4 inch|
|Multi Vee Press Brake L x T||27.5 x .187 inch|
|Throat Depth||16 inch|
|Vee Notcher Side x Side x T||4.1 x 4.1 x .6 inch|
|Working Height||30.3 inch|
|Square Bar Shear||1.75 x 1.75 inch|
|Angle Shearing at 90 degree||6 x 6 x .6 inch|
|Angle Bending||4 x .5 inch|
|Angle Flange Trim||4 inch|
|Blade Length||18.3 inch|
|Large V Notcher Side x Side x T||5.75 x 5.75 x .5 inch|
|Max. Stroke Length||3 inch|
|Diameter x Thickness||2 x .625 inch|
|Cycles / Min.||30 at 15 mm|
|Flat Bar Shearing||18.1 x .75 inch|
|Shipping Weight||9,460 lbs.|
|Shipping Dimensions||85.5 x 44 x 80.7 inch|
* specifications subject to change without notice.
|SW-3421000||Triangular Notching Set for SW-132|
|SW-9021300W||Large Vee Notcher Set for SW-132|
|SW-9023901||Single Vee Press Brake for SW-132|
|SW-9023690||Multi Vee Press Brake for SW-132|
|SW-3424400||Angle Bending Set for SW-132|
|SW-9025W-1"||1 inch OD Tube Notching Set for SW-132|
|SW-9025W-1.25"||1-1/4 inch OD Tube Notching Set for SW-132|
|SW-9025W-1.5"||1-1/2 inch OD Tube Notching Set for SW-132|
|SW-9025W-2"||2 inch OD Tube Notching Set for SW-132|
|SW-9025W-2.5"||2-1/2 inch OD Tube Notching Set for SW-132|
|SW-9025W-3"||3 inch OD Tube Notching Set for SW-132|
|SW-9025W-3.5"||3-1/2 inch OD Tube Notching Set for SW-132|
|SW-9025W-4"||4 inch OD Tube Notching Set for SW-132|
|SW-9025W-4.25"||4-1/4 inch OD Tube Notching Set for SW-132|
|SW-9025W-1.315"||1 inch Pipe (1.315"OD) Notching Set for SW-132|
|SW-9025W-1.660"||1-1/4 inch Pipe (1.66"OD) Notch Set for SW-132|
|SW-9025W-1.9"||1-1/2 inch Pipe (1.9"OD) Notch Set for SW-132|
|SW-9025W-2.375"||2 inch Pipe (2.375"OD) Notch Set for SW-132|
|SW-9025W-2.875"||2-1/2 inch Pipe (2.875"OD) Notch Set for SW-132|
220 VOLT THREE PHASE DUAL OPERATOR 132 TON 5 STATION IRONWORKER.
CALL NOW FOR YOUR BROTHER-IN-LAW DEAL ON THIS ITEM
Mfg. item #: SW-132
lease to own for as little as:$891 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1