chat now with southern tool
Technical Sales 1–800–458–3687

Denray 3696 Wood Sanding Down Draft Tabl

Model 3696

downdraft table

3696 3696SS

 

Model 3696 features the new tube filtration system, which cleans with a 99 percent capture rate at 1 micron. These tables are very popular with the small to medium sized shops. Many large shops use this model line when sanding small items to allow each sander to have their own station. Standard features are 115 volt and casters and these features can be varied. They come with 4 - swivel casters including two that lock. When mobility is important this model line is your best choice. If ordered with three phase, the table will come with a magnetic starter. The height can be requested from 29 inch without casters to any reasonable height. Any non-standard features must be ordered and then faxed to Denray Machine.

General Information

  • MOTORS are (TEFC) Totally Enclosed Fan Cooled. MOTORS for hazard locations like spray areas are available
  • RECEPTACLES You must bring power into them from an electrical source outside the table
  • CASTERS Standard on the 3696 model, cannot be added later
  • HEIGHTS may be altered, call for information
  • TOPS are 3/4 inch medium density fiber board (MDF) covered with a very durable sprayed-on urethane cover-non-marring, soft enough not to effect product being sanded
  • HYDRAULIC MOTORS are available to run fans
  • WARRANTY one year parts and labor except filters
SPECIFICATIONS
Size 36 x 96 Height: 36 inch
CFM 3800
Motor 3PH/2HP, 1PH 1-1/2HP
Sound Level 78 Decibels
Options Exhaust Chimneys, Exhaust Mufflers, Magnehelic Gauges, HEPA Filter Banks, and 3-Sided 20 inch Shields

 

Solid Surface This table has a very unique feature: all of the inlet air enters the table through a long slot on each side. One side may be closed, which doubles the suction on the open side, a great feature when routing or with the removal of large amounts of dust. A highlight of this unit is the chip deflector (shown in close up pictures), which is mounted on hinges and held in the upright position by two magnets. As a piece is being routed, the router chips hit the deflector, then are sucked down into the machine. The deflector can quickly be swung up into position or down out of the way. Great for house doors, table tops, counter tops, etc. Counter sink bowls can be positioned inside the machine, allowing unlimited access to the counter top's edges.

Features:

  • MOTORS are (TEFC) Totally Enclosed Fan Cooled. MOTORS for hazard locations like spray areas are available.
  • RECEPTACLES You must bring power into them from an electrical source outside the table.
  • CASTERS Standard on the 2800 series, optional on all others upon request, cannot be added later.
  • HEIGHTS may be altered, call for information.
  • TOPS are 3/4 inch medium density fiber board (MDF) covered with a very durable sprayed-on urethane cover-non-marring, soft enough not to effect product being sanded.
  • HYDRAULIC MOTORS are available to run fans.
  • WARRANTY one year parts and labor except filters. Filters are standard filters.
SPECIFICATIONS
Size  36 X 96, 36" tall, actual top 27 inch wide
CFM 4800 After Filters
Sound Level 78/ Decibels
Options exhaust chimney

 

Models and Accessories
3696-1 Downdraft Table -  Tube Type filtration  - 1 Phase Unit  **W/Casters Standard Equipment
3696-3 Downdraft Table -  Tube Type filtration  - 3 Phase Unit  **W/Casters Standard Equipment
3696SS-1 Downdraft Table -  Pushbutton Cleaning  - 1 Phase Unit  **W/Casters Standard Equipment
3696SS-3 Downdraft Table -  Pushbutton Cleaning  - 3 Phase Unit  **W/Casters Standard Equipment
3696-1
DOWNDRAFT TABLE - TUBE TYPE FILTRATION - 1 PHASE UNIT **W/CASTERS STANDARD EQUIPMENT
Mfg. item #: 3696-1
DEN3696-1
lease to own for as little as:$121 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$6,043.20

170
3696-3
DOWNDRAFT TABLE - TUBE TYPE FILTRATION - 3 PHASE UNIT **W/CASTERS STANDARD EQUIPMENT
Mfg. item #: 3696-3
DEN3696-3
lease to own for as little as:$121 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$6,043.20

170
3696SS-1
DOWNDRAFT TABLE - PUSHBUTTON CLEANING - 1 PHASE UNIT **W/CASTERS STANDARD EQUIPMENT
Mfg. item #: 3696SS-1
DEN3696SS-1
lease to own for as little as:$229 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$11,473.06

170
3696SS-3
DOWNDRAFT TABLE - PUSHBUTTON CLEANING - 3 PHASE UNIT **W/CASTERS STANDARD EQUIPMENT
Mfg. item #: 3696SS-3
DEN3696SS-3
lease to own for as little as:$229 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$11,473.06

170
Copyright © 2017 Smith-Hamilton, Inc
0.006 170719 09:22