chat now with southern tool
Technical Sales 1–800–458–3687

Denray 9600 Wood Sanding Down Draft Tabl

 

downdraft table

Wood downdraft table

Tube Type Filtration Pushbutton Cleaning

 

Since the inception of this business, this table has sold the most because of its size. This model features the new tube filtration system, which cleans with a 99 percent capture rate at 1 micron. With the 48 x 96 inch top it has been used for large parts or 3-4 operators. Casters are a standard feature, coming with 4 - swivel casters including two that lock. For any non-standard feature information or special requests, contact Denray Machine.

Features:

  • MOTORS are (TEFC) Totally Enclosed Fan Cooled. MOTORS for hazard locations like spray areas are available.
  • RECEPTACLES You must bring power into them from an electrical source outside the table.
  • CASTERS Standard on the 9600 Model, cannot be added later.
  • HEIGHTS may be altered, call for information.
  • TOPS are 3/4 inch medium density fiber board (MDF) covered with a very durable sprayed-on urethane cover-non-marring, soft enough not to effect product being sanded.
  • HYDRAULIC MOTORS are available to run fans.
  • WARRANTY one year parts and labor except filters. Replacement filters are available for purchase from Denray.
SPECIFICATIONS
Size 48 x 96 Height: 36 inch
Weight 1050 lbs
CFM 4300
Motor 3HP/3PH
Voltages 230 or 460 volt, must specify
Sound Level 81 Decibels
Options Exhaust Chimneys, Exhaust Mufflers, Magnehelic Gauges, HEPA Filter Banks, and 3-Sided 20 inch Shields

 

This model contains 4 cartridge filters that clean to .5 micron. It features push button cleaning, which requires a button to be pushed 3-5 times a day, thereby releases a large amount of compressed air into filters. The air pulses off the dust, which drops into drawers below the filters. The drawers should be cleaned a few times a month, or as needed. These tables are designed to set end to end, allowing filters and drawers to be serviced from the front of the machine. The top, as with all other models, has a spray on rubber type finish.

Features:

  • MOTORS are (TEFC) Totally Enclosed Fan Cooled. MOTORS for hazard locations like spray areas are available.
  • RECEPTACLES You must bring power into them from an electrical source outside the table.
  • CASTERS Standard on the 2800 series, optional on all others upon request, cannot be added later.
  • HEIGHTS may be altered, call for information.
  • TOPS are 3/4 inch medium density fiber board (MDF) covered with a very durable sprayed-on urethane cover-non-marring, soft enough not to effect product being sanded.
  • HYDRAULIC MOTORS are available to run fans.
  • WARRANTY one year parts and labor except filters. Filters are standard filters and may be purchased from Denray or other suppliers
SPECIFICATIONS
Size 48 x 96 Height: 36 inch
Weight 1200 lbs
CFM 4800 CFM After Filter
Motor 5HP - 3PH OR 1PH
Voltages 220 - 1PH, 230 - 3PH, 460 - 3PH, and 575 - 3PH
Sound Level 82 Decibels
Options auto-timer, chiminey, explosive proof motor

 

Models and Accessories
9600-1 Downdraft Table -  Tube Type filtration  - 1 Phase Unit  **W/Casters Standard Equipment
9600-3 Downdraft Table -  Tube Type filtration  - 3 Phase Unit  **W/Casters Standard Equipment
9600B-1 Downdraft Table -  Pushbutton Cleaning  - 1 Phase Unit ** See DENCAS200 - For Caster Set
9600B-3 Downdraft Table -  Pushbutton Cleaning  - 3 Phase Unit ** See DENCAS200 - For Caster Set
CAS200 Caster Set

 

9600-1
DOWNDRAFT TABLE - TUBE TYPE FILTRATION - 1 PHASE UNIT **W/CASTERS STANDARD EQUIPMENT
Mfg. item #: 9600-1
DEN9600-1
lease to own for as little as:$140 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$7,013.66

201
9600-3
DOWNDRAFT TABLE - TUBE TYPE FILTRATION - 3 PHASE UNIT **W/CASTERS STANDARD EQUIPMENT
Mfg. item #: 9600-3
DEN9600-3
lease to own for as little as:$140 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$7,013.66

201
9600B-1
DOWNDRAFT TABLE - PUSHBUTTON CLEANING - 1 PHASE UNIT ** SEE DENCAS200 - FOR CASTER SET
Mfg. item #: 9600B-1
DEN9600B-1
lease to own for as little as:$202 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$10,108.90

201
9600B-3
DOWNDRAFT TABLE - PUSHBUTTON CLEANING - 1 PHASE UNIT ** SEE DENCAS200 - FOR CASTER SET
Mfg. item #: 9600B-3
DEN9600B-3
lease to own for as little as:$202 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$10,108.90

201
CAS200
CASTER SET FOR DOWNDRAFT TABLE
Mfg. item #: CAS200
DENCAS200
FREE shipping when ordered with a machine from this manufacturer.20
$250.00

201
Copyright © 2017 Smith-Hamilton, Inc
0.006 170719 10:25