chat now with southern tool
Technical Sales 1–800–458–3687

General Equipment EP20ACP Non-Hazardous

  

EP20ACP NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER EP20ACP NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER EP20ACP NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

 

NON-HAZARDOUS LOCATIONS

The industry's most complete line of confined space and positive pressure type ventilation products designed for use in non-hazardous locations. Steel, cast aluminum and high strength plastic construction. Choose from AC and DC electric or gasoline power sources along with a complete line of ducts and related storage accessories.

EP20ACP NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

Use the EP20ACP Ventilation Blower for both vertical and horizontal air flow movement job applications including carpets, subfloors, cabinets, closets, ceilings, attic areas and damaged drywall, Dry an entire room in just a matter of a minutes and not hours. Use it to effectively dry an entire room quickly and easily by using standard and accepted air movement principles. The multi-bladed propeller draws in warmer and less humid air from above, forces it down at high velocity and disperses it across the entire floor as a fast and effective drying solution. The effect is a vertically oriented convection pattern that helps maximize water absorption and the heat transfer necessary to dry floor surfaces. The boxed-type design gives the EP20ACP added versatility when placed in a horizontal configuration. Position it within a work area to create a horizontal convection air flow pattern to cool personnel or dilute the effects of contaminated air.

  • Power Source: 320 W, 115 VAC, 60 HZ, 3.8 amperes, 2 speed
  • Fan Type: Glass-reinforced blades and hub
  • Duct Diameter: 20 inches
  • Free Air Flow: 3500 CFM

EP20ACP NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

Use the EP20ACP Ventilation Blower for both vertical and horizontal air flow movement job applications including carpets, subfloors, cabinets, closets, ceilings, attic areas and damaged drywall, Dry an entire room in just a matter of a minutes and not hours. Use it to effectively dry an entire room quickly and easily by using standard and accepted air movement principles. The multi-bladed propeller draws in warmer and less humid air from above, forces it down at high velocity and disperses it across the entire floor as a fast and effective drying solution. The effect is a vertically oriented convection pattern that helps maximize water absorption and the heat transfer necessary to dry floor surfaces. The boxed-type design gives the EP20ACP added versatility when placed in a horizontal configuration. Position it within a work area to create a horizontal convection air flow pattern to cool personnel or dilute the effects of contaminated air.

Specifications:


POWER SOURCE
Electric Motor: 320 W, 115 VAC, 60 HZ, 3.8 amperes, 2 speed
Speed Control: Single Speed

BLOWER
Type: DOWNFORCE CONVECTION BLOWER
Material: High density, UV resistant polyethylene
Size: 20 inch (508 mm) Nominal Diam. inlet/ Outlet

GENERAL
Operating Positions: Four
Weight: 53 lbs (24 kg)

DIMENSIONS
Height: 22 inch ( mm)
Length: 26 inch ( mm)
Width: 22-3/4 inch ( mm)

Specifications:


POWER SOURCE
Electric Motor: 320 W, 115 VAC, 60 HZ, 3.8 amperes, 2 speed
Speed Control: Single Speed

BLOWER
Type: DOWNFORCE CONVECTION BLOWER
Material: High density, UV resistant polyethylene
Size: 20 inch (508 mm) Nominal Diam. inlet/ Outlet

GENERAL
Operating Positions: Four
Weight: 53 lbs (24 kg)

DIMENSIONS
Height: 22 inch ( mm)
Length: 26 inch ( mm)
Width: 22-3/4 inch ( mm)

LIMITED PRODUCT WARRANTY


GENERAL EQUIPMENT COMPANY makes the following limited warranty to the original purchaser of each new and unused light construction equipment product:

GENERAL EQUIPMENT COMPANY MAKES NO WARRANTY THAT THE LIGHT CONSTRUCTION PRODUCTS SOLD HEREUNDER SHALL BE MERCHANTABLE OR THAT SUCH PRODUCTS SHALL BE FIT FOR ANY PARTICULAR PURPOSE AND THERE ARE NO WARRANTIES EXPRESSED OR IMPLIED MADE OTHER THAN ITS STANDARD, LIMITED WARRANTY.

WHAT THE LIMITED WARRANTY COVERS

GENERAL EQUIPMENT COMPANY warrants that each new and unused light construction equipment product and or accessory product sold by it: A) to be free from defects in material and workmanship under normal use/service for a period of two (2) years from date of purchase: B) to warrant the labor expenses associated with defects in material and workmanship for a period of one (1) year from date of purchase. The obligation under this warranty being limited to current flat labor rates and the replacement and/or repair at its Owatonna, Minnesota, factory site, or at an authorized dealer designated by it, of such part or parts as shall appear upon inspection to have been defective in material or workmanship at the time sold, provided that the part or parts claimed defective are returned to the inspection point, transportation charges prepaid. At the time of requesting warranty service, the purchaser must present evidence of the purchase date of the part or parts submitted for warranty inspection.

The only remedies the purchaser has in connection with the breach of performance of any warranty for the light construction equipment products sold by GENERAL EQUIPMENT COMPANY are those set forth in this document. In no event will GENERAL EQUIPMENT COMPANY, its authorized dealer or representative, or any company affiliated with GENERAL EQUIPMENT COMPANY be held liable for any incidental or consequential damages or injuries.

WHAT THE LIMITED WARRANTY DOES NOT COVER

This warranty does not cover depreciation or damage caused by: normal wear, accident, improper protection in storage, improper use, alterations, tampering, the environment, improper maintenance, lack of maintenance or incidental costs incurred by the original purchaser while the light construction equipment product is being examined and or repaired under warranty. In addition to the above limitations and/or exclusions, the following basic product components are not covered by the limited warranty:

1) Parts and/or components subject to wear with normal usage, but not specifically limited to the following:

a) High impact/wear related components including, but not limited to: V-belts, flails, flail rods and flail drums.
b) High abrasion/wear related components including, but not limited to: augers, auger flighting and boring heads.
c) Engine throttle control cable assembly and related control devices.
d) Centrifugal clutch components including, but not limited to: shoes, springs, drum and motor assembly.

2) Parts and labor for scheduled and general maintenance services as defined in the applicable Operators Manual.

3) Engines, motors, controls and other accessories sold with, attached to, or operated with a light construction equipment product sold by GENERAL EQUIPMENT COMPANY and warranted separately by the Original Equipment Manufacturer (OEM) per its respective warranty program. Contact the Customer Service Department of GENERAL EQUIPMENT COMPANY for assistance in obtaining specific OEM warranty coverage.

This limited warranty gives you specific legal rights and may also have other rights which may vary from state to state. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. These limitations may not apply to the original purchaser.

EP20ACP
BLOWER, DOWNDRAFT, 20D, 0.4HP, 115VAC, 60HZ ** SHIPS GROUND UPS - 60 LBS APPROX WEIGHT
Mfg. item #: EP20ACP
GENEP20ACP
"Ships by UPS, see freight calculator at checkout."2
$315.25

2
Copyright © 2018 Smith-Hamilton, Inc
0.004 181010 14:35