Technical Sales 1–800–458–3687

General Equipment SG24-G Surface Grinder

General's SG24/G gasoline powered surface grinder features various grinding systems designed for breaking up deposits of grease, dirt, rubber carpet backing and industrial residues; cleaning concrete asphalt and tiles; producing exposed aggregate slabs; and buffing and polishing more delicate terrazzo and marble floor surfaces.

The SG24/G features twin, counter-rotating discs that can work a 24"x12" area. These standard discs can be quickly removed to allow an operator to attach standard 10" diameter, multi-segmented dry diamond discs for increased productivity on polymer concrete, epoxy, plastic overlays and critical flat floor installations.

Power is derived from various industrial quality 11 hp engines, with optional conversion to LP gas available. Featuring a heavy duty, dual V-belt/spur gear transmission, the unit also has an adjustable position handle for variances in operator height. In addition, the caster wheel height is also adjustable to accommodate differences in grinding system selection and component wear.

SURFACE GRINDERS
MODEL  SG24/GH SG24/GHP
POWER SOURCE    
Type Honda GXV340, 11 hp (82 kW) at 3600 RPM, 4-cycle, gasoline engine equipped with Lo Tone muffler with spark arrestor Honda GXV340, 11 hp (82 kW) at 3600 RPM, 4-cycle, gasoline engine converted with propane use, equipped with Lo Tone muffler with spark arrestor
Fuel Specification Gasoline, regular or unleaded Liquid propane
Starting Method Mechanical rewind Mechanical rewind - electric starter optional
Air Cleaner Dual element type Dual element
Electric Motor Full Leaded Amperage (FLA) Rating n/a n/a
Electric Motor Starting Power Required (SPR) (SPR)=(FLA) x 5 Factor n/a n/a
Minimum Circuit Breaker Amperage Required n/a n/a
FRAME    
Structure Unitized, welded steel plate Unitized, welded steel plate
Drive System Dual B series V-belt/pulley and spur gear reduction system. Engine powered units also utilize a centrifugal clutch assembly. Gear operate in a fully enclosed transmission case and are lubricated by a high temperature transmission grease formulated with an extreme pressure EP additive. The EP additive allows the grease to better cling to the gear teeth at high rotational speeds. Dual B series V-belt/pulley and spur gear reduction system. Engine powered units also utilize a centrifugal clutch assembly. Gear operate in a fully enclosed transmission case and are lubricated by a high temperature transmission grease formulated with an extreme pressure EP additive. The EP additive allows the grease to better cling to the gear teeth at high rotational speeds.
Transmission Bearings High capacity, self aligning ball bearing units are sealed for maximum dust protection and equipped with Zerk® type fittings for field lubrication High capacity, self aligning ball bearing units are sealed for maximum dust protection and equipped with Zerk® type fittings for field lubrication
Counter-Rotation Discs two aluminum, counter-rotation, design for direct mounting of all popular General® and EDCO® multi-accessory attachments with the PLAS-T-LOK™plastic wedge or standard wood wedge. Rotation direction of each disc is marked for easy reference two aluminum, counter-rotation, design for direct mounting of all popular General® and EDCO® multi-accessory attachments with the PLAS-T-LOK™plastic wedge or standard wood wedge. Rotation direction of each disc is marked for easy reference
Discs Rotation Speed 250 RPM 250 RPM
Discs Flexing System Twelve (six per side) Lord® type elastomeric bushing designed to flex at controlled rates and allow the multi-accessory disc to follow irregularities in the surface profile. The bushing also help prevent damage too the transmission gears and shafts in the event the multi-accessory attachment comes in direct contact with an above surface obstruction. Bushings are easily replaced in the field with simple tools Twelve (six per side) Lord® type elastomeric bushing designed to flex at controlled rates and allow the multi-accessory disc to follow irregularities in the surface profile. The bushing also help prevent damage too the transmission gears and shafts in the event the multi-accessory attachment comes in direct contact with an above surface obstruction. Bushings are easily replaced in the field with simple tools
Operator Handle Height Adjustment Three positions to accommodate variance in operator height. Adjustment procedure requires only simple hand tools. Three positions to accommodate variance in operator height. Adjustment procedure requires only simple hand tools.
Frame height Adjustment Three positions to accommodate variances in multi-accessory attachments. Adjustment procedure require only simple hand tools Three positions to accommodate variances in multi-accessory attachments. Adjustment procedure require only simple hand tools
GENERAL      
Overall Width (With Protective Bumper) 27 1/2" (699 mm) 27 1/2" (699 mm)
Normal Operator Handle Height 38" (965 mm) 38" (965 mm)
Overall length 55 1/4" (1403 mm) 55 1/4" (1403 mm)
Nominal Multi-Accessory Disc Working Width 24" (610 mm) 24" (610 mm)
Weight (Less Multi-Accessory Attachment And Safety And Dust Shield Assembly 300 lbs. (136 kg) 350 lbs. (159 kg)
Accessories
icon-planer.jpg icon-grinder.jpg icon-saw.jpg icon-stripper.jpg icon-breaker.jpg
Plane or Scarifiy Surfaces Grind or Polish Concrete Surfaces Saw Cracks or Cut Asphalt Strip Coatings from Surfaces Break Concrete
There are no further details.
There are no further specifications.
There is no further information.
There are no listed accessories.

smith hamilton circa 1926
  • Hours: Monday - Friday
    8:00 AM to 7:00 pm ET
  • Toll Free:
    1-800-458-3687
  • International:
    786-866-9865
  • Fax:
    865-376-9792
  •  
Copyright © 2024 Smith-Hamilton, Inc
0.001 150419 18:39