Grinding Stones |
The C06
and C10 is a coarse grade and one
of the most popular and provided the maximum material removal rates.
They are utilized for general grinding and the removal of trowel
marks., hight spots and rought sections on concrete surfaces. The
average servise life is approximately : 4 to 10
hours
The C24 is a medium
grade stone that will result in a lower material removal
rates. It is utilized for finer finish grinding of concrete and
rought grinding on terrazzo and other tyes of stone floor
configurations. The average service life is
approximately: 6 to 10 hours.
The C80 is a fine grade
stone the will result in still lower material removal
rates. It is utilized for polishing concrete and medium grinding on
terrazzo and other tyes of stone floor configurations with a
water/slurry mixture only. The average service life
is approximately: 8 to 20 hours.
The C120
is a super fine grade stone the will result in
still lower material removal rates. It is utilized for final
polishing concrete and medium grinding on terrazzo and other tyes of
stone floor configurations with a water/slurry mixture only. The
average service life is approximately: 40 to 75
hours
|
|
Silicon carbide as the abrasive
medium and a clay binder as the matrix. |
|
|
Remove up to
1/8 inch material thickness. The larger the number, the
finer the grain structure and usually, the smoother the
resulting finish |
|
|
Coarse to supper fine grades
available |
|
|
C10 stone
most popular. Water and slurry minimizes clogging. Do not
use to remove any thickness of paints, adhesives, epoxies,
etc because of clogging characteristics similar to
sandpaper. |
|
Service Life |
Up to 5000 square feet. |
|
|
2 inch x 2 inch x 4 inch |
|
Diamonds - DIAM-A-TACH® |
Purple
identification color, softest matrix composition,
40 to 50 grit, stamped "P" on pin shank.
Yellow identification color,
softer matrix composition, for many general purpose
applications. 40 to 50 grit, stamped "Y" on pin shank.
Black identification color,
medium matrix composition, for use on epoxy mortar
(abrasive) or more abrasive materials. 40 to 50 grit, stamped "B" on
pin shank.
Green identification color,
green matrix composition, for use on green type
(less than two day old) or extremely abrasive concrete/asphalt. 40
to 50 grit, stamped "G" on pin shank.
Red
identification color, finish matrix composition,
for use on finish grinding (polishing) applications requiring
minimal swirl marks. 100 to 120 grit, stamped "R" on pin shank.
|
|
Industry stantard diamds |
|
|
Removal of
thin layers of materials without clogging, including
adhesives, epoxies, urethanes, paints and concrete |
|
|
Sanded finsish to a polished
finished |
|
|
Segments are
directionally marked to increase diamond tail service life.
Normal segment wear: .015 inch per 8 hour day. Variety of
matrix/diamond configurations available. Use wet or dry |
|
Service Life |
Up to 50,000 square feet. (up
to 15 time longer than carbide grinding stones) |
|
|
2 inch x 2 inch x 4 inch |
|
