chat now with southern tool
Technical Sales 1–800–458–3687

Original Saw 16"- 22" Super Duty Metal C

 s-h alt

16"- 22" Super Duty Metal Cutting Radial Arm Saw

Features:

Developed for production applications which require accurate high speed cutting of ferrous and non ferrous material such as steel, aluminum, copper and other material such as plastic, fiber glass, resins, ect. Smoothly cut surfaces are achieved at any combination of miter and bevel angles, Use of the optional mist coolant system, is recommended for maximum blade life (cutting non-ferrous material only) while maintaining smoothest, highest quality finish.

Features

  • 7.5 hp 3-phase totally enclosed fan cooled motor available in the following voltages: 208/230/380/415/460/575
  • Automatic brake system
  • Metal cutting "door style" guard allows for easy blade removal and installation
  • Manual (hand crank) chain carriage feed - allows for better control for carriage.
  • 24" crosscut on 'M' (Medium Arm) Models
  • 32" crosscut on 'L' (Long Arm) Models
  • Adjustable cross cut stop
  • Base column lock
  • Precision carriage riding on 8 wide contact double row ball bearings, providing a very smooth vibration free travel.
  • Powder coated heavy gage steel frame an legs
  • Metal cutter table, with T-Slot rails, this can ne used at cutting surface or allows for easy mounting or your own table top.
  • Arbor nut and precision ground blade collars
  • Wrench kit (includes allen arbor wrench, flat arbor wrench, & misc allen wrenches)

Standard Features

  • Totally Enclosed fan cooled 7.5 hp motors all 3 phase units available in 208/230/380/400/460/575 voltages.
  • Totally Enclosed fan cooled motors 1 phase units available in 208 and 230 volt – single phase motor available on 16” units only models 3579-16M and 3579-16L
  • Motors manufactured by Original Saw Company
  • Automatic Brake System
  • Manual chain crank cross feed
  • Powder Coated Heavy Gage frame and legs
  • Powder Coated castings
  • Large oversized aluminum t-slot table
  • Full IEC magnetic starter with low voltage and overload protection
  • Low voltage controls ( 24 volts at start/stop station)
  • Precision ground 6” diameter blade collars
  • Complete upper and lower blade guards
  • Wrench pack

SPECIFICATIONS

Size

16" 20" 22"
Model Number
Arm
Medium
Long
Medium
Long
Medium
Long
Blade Size
16"/400mm
16"/400mm
20"/500mm
20"/500mm
22"/550mm
22"/550mm
MOTOR: ALL MOTORS TOTALLY ENCLOSED FAN COOLED
HP
7.5*
7.5*
7.5*
7.5*
7.5*
7.5*
Phase
3
3
3
3
3
3
Hertz
50/60
50/60
50/60
50/60
50/60
50/60
Volts*
230/460**
230/460**
230/460**
230/460**
230/460**
230/460**
Brake
Auto
Auto
Auto
Auto
Auto
Auto
Arbor
1" x 1-3/8"
1" x 1-3/8"
1" x 1-3/8"
1" x 1-3/8"
1" x 1-3/8"
1" x 1-3/8"
CAPACITIES
Maximum Cross Cut 1" Stock
24"/609mm
32"/812mm
N/A N/A N/A N/A
Maximum Miter 45° 1" Stock
16"/406mm
21 5/8"/549mm
N/A N/A N/A N/A
Maximum Depth of Cut
5"/127mm
5"/127mm
7"/175mm
7"/175mm
8"/200mm
8"/200mm
Maximum Depth of Cut 45° @ bevel
2"/50mm
2"/50mm
3 3/8"/85mm
3 3/8"/85mm
4"/101mm
4"/101mm
s-h alt Motors- All Super Duty, Heavy Duty, and Contractor Duty Series motors are manufactured in our Northern Iowa facility. Producing our own motors allows us to uphold a very high level of quality in our machines. These totally enclosed fan cooled (TEFC) motors are manufactured with cooling ducts that move air through the motor laminations to keep them cool while keeping the internal portion of the motor sealed from dust and contamination. These motors also offer the added benefit of an integrated electro-mechanical brake system, these brake systems continue to operate even when the power drops out. Electronic brake systems, cannot compete with the durability or reliability of our electromechanical brake systems.

 

s-h alt Cast Construction - Original Saw Company’s Radial Arm Saws are manufactured utilizing high quality heavy cast iron and cast aluminum construction. These high quality American castings provide a very rigid, vibration free cutting platform to perform many different sawing and dado operations. It is because of this construction, we can proudly say our machines are the best in the industry. Many of the machines we produce today will be around for generations.

 

s-h alt Carriage Control - The metal cutting series comes standard with a manual chain feed assembly. This feature gives the operator better control of the carriage versus pulling the carriage by hand.

 

s-h alt Guarding - Shown left is the Metal Cutter’s exclusive “door style” guard that allows easier and quicker blade changes, the guard needs only to be opened not taken off to change the blade out. This is a very important feature for the ferrous cutting application where frequent blade changes are necessary for optimum cutting performance and safety.

 

s-h alt Table - The Metal Cutting Series comes with the standard t-slot aluminum extruded top. This top allows for easy attaching of our aluminum fence (shown), clamping systems, or table surface options, as well as your own clamping jigs or cutting fixtures. These all come mounted to a extruded leveling frame for easy leveling of the entire table assembly through out the life of the machine.
3579-16L
16 RADIAL ARM SAW SD SERIES 7.5HP 3 PHASE 32 CROSSCUT ** TRUCK SHIPPING WEIGHT OF: 960 LBS
STILL MANUFACTURED AND ASSEMBLED IN THE USA
Mfg. item #: 3579-16L
ORG3579-16L
lease to own for as little as:$208 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$10,415.00

246
3579-16M
16 RADIAL ARM SAW SD SERIES 7.5HP 3 PHASE 24 CROSSCUT ** TRUCK SHIPPING WEIGHT OF: 925 LBS
STILL MANUFACTURED AND ASSEMBLED IN THE USA
Mfg. item #: 3579-16M
ORG3579-16M
lease to own for as little as:$199 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$9,947.00

246
3579-20L
20 RADIAL ARM SAW SD SERIES 7.5HP 3 PHASE 31 CROSSCUT ** TRUCK SHIPPING WEIGHT OF: 960 LBS
STILL MANUFACTURED AND ASSEMBLED IN THE USA
Mfg. item #: 3579-20L
ORG3579-20L
lease to own for as little as:$214 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$10,703.00

246
3579-20M
20 RADIAL ARM SAW SD SERIES 7.5HP 3 PHASE 23 CROSSCUT ** TRUCK SHIPPING WEIGHT OF: 925 LBS
STILL MANUFACTURED AND ASSEMBLED IN THE USA
Mfg. item #: 3579-20M
ORG3579-20M
lease to own for as little as:$204 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$10,210.00

246
3579-22L
22 RADIAL ARM SAW SD SERIES 7.5HP 3 PHASE 24 CROSSCUT ** TRUCK SHIPPING WEIGHT OF: 1075 LBS
STILL MANUFACTURED AND ASSEMBLED IN THE USA
Mfg. item #: 3579-22L
ORG3579-22L
lease to own for as little as:$240 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$11,993.00

246
3579-22M
22 RADIAL ARM SAW SD SERIES 7.5HP 3 PHASE 16 CROSSCUT ** TRUCK SHIPPING WEIGHT OF: 1025 LBS
STILL MANUFACTURED AND ASSEMBLED IN THE USA
Mfg. item #: 3579-22M
ORG3579-22M
lease to own for as little as:$227 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$11,368.00

246
Copyright © 2017 Smith-Hamilton, Inc
0.007 150419 18:39