Wheel Material - Standard wheels and phenolic plastic. Optional wheel
material avaliable |
Air Power - Optinal air motors that operate from your factory air line
supply are avaliable
- 1000 lb capacity models require 30 cfm @ 80 psi air supply
- 1500, 2000, and 2700 lb capacity models require 45 cfm @ 80
psi air supply
|
Revered Forks - Idea for overhead installation. Forks can be modified in a
reverse position, giving an increased lowered / raised height.
Consult Presto Sales |
Fith Wheel - Recominded for lifts with wide straddles and heavier load
capacities. 8" polyurethane plastic wheel and spring loaded handle.
Factory installed on B800 and BT800 |
R-5 Roller Bed - Excellent for transferring heavy objects to/from lift
with minimum effort. Front or side loading. Rollers on 3" center.
27" x 30" area mounted on a 32" x 36" slip-on platform. 1000 lb
capacity maximum. Weight 145 lbs, requires 24" load center |
P-6 Die Puller - Equipped with hand-operated winch with cable and hook
for pulling dies over roller bed. 27" x 30" roller area mounted on
32" x 30" slip-on platform. 1000 lb capacity maximum. Weight 185
lbs, 24" load center reuired. |
Remote Control - Not for lifting personnel! Must be factory installed. For
Battery or Electric AC operated lifts
- RC-10: One station, 2 lbs
- RC-20: Two station, 4 lbs
- FC-10: foot control, 15 lbs
|
Height - Standard lift height can be decreased to meet special handling
requirements. For tele-scopic mast units, consult factory. |
Fire Resistant Hydraulic Fluid - Water-glycol fluids are fire resistant,
non-explosive and non-toxic. Approved by Factory Mutual Insurance
Engineering Laboratories. |
DG30 Drum Grab - Automatically grabs 30 and 55 gallon drums for handling
and stacking in a vertical position. Mounts on the backplate of any
straddle fork model. Parrot-beak mechanism for steel and fibre
drums.
- DG-30: 36lbs
- DG-30PS: 51 lbs, for Pallet Straddle Stacker
|
Model Number |
Description and
Specifications |
Shipping Weight |
Interchanges with
forks on adjustable fork models with sheet
metal back plates
for roll and coil handling. |
RR1 |
Ram 2 ½"
round x 20" long |
1000 lb
capacity @ 15" load center |
13 lbs |
RR2 |
Ram 2 ½" round x 24" long |
1000 lb capacity @ 18" load center |
16 lbs |
RR3 |
Ram 2 ½"
round x 13" long |
1000 lb
capacity @ 13" load center |
12 lbs |
RR4 |
Ram 2 ½" round x 30" long |
1000 lb capacity @ 20" load center |
20 lbs |
RS1 |
Ram 3" square
x
20" long |
1500 lb
capacity @ 15" load center |
15 lbs |
RS2 |
Ram 3" square x
24" long |
1500 lb capacity @ 18" load center |
24 lbs |
RS3 |
Ram 2 ½"
round x 30" long |
1500 lb
capacity @ 20" load center |
22 lbs |
RS4 |
Ram 3" square x
30" long |
1500 lb capacity @ 20" load center |
27 lbs |
Interchanges with
fork models with shaft (ps) back plate |
RSPS24 |
Ram 3" square
x
24" long |
1500 lb
capacity @ 18" load center |
35 lbs |
RSPS30 |
Ram 3" square x
30" long |
1500 lb capacity @ 20" load center |
35 lbs |
RSPS36 |
Ram 3" square
x
36" long |
1500 lb
capacity @ 24" load center |
35 lbs |
|
Model Number |
Description and
Specifications |
Shipping Weight |
Mounts on fork
model with sheet metal back plates for
lifting and suspending loads. |
B13 |
13" boom with
hook |
1000 lb
capacity @ 13" load center |
22 lbs |
B15 |
15" boom with hook |
1000 lb capacity @ 15" load center |
22 lbs |
B18 |
18" boom with
hook |
1000 lb
capacity @ 18" load center |
22 lbs |
B20 |
20" boom with hook |
1000 lb capacity @ 20" load center |
25 lbs |
Mounts on fork
models with shaft (ps) back plate |
B20-15PS |
20" boom with
hook |
1500 lb
capacity @ 20" load center |
35 lbs |
B24-15PS |
24" boom with hook |
1500 lb capacity @ 24" load center |
45 lbs |
|
|
Model Number |
Description and
Specifications |
Shipping Weight |
C119-25 |
Adjustable
forks, pair - 25" length |
62 lbs |
C119-30 |
Adjustable forks, pair - 30" length |
72 lbs |
C119-36 |
Adjustable
forks, pair - 36" length |
114 lbs |
C119-42 |
Adjustable forks, pair - 42" length |
130 lbs |
BP |
Forks bolted
in place |
N/A |
FF |
Forks flat to the floor |
N/A |
Mount on fork
models with sheet metal back plates (fork
back with clips) |
C119-1 |
Pair - 12"
backs, 25" length with
15" L.C used on M200 Series |
62 lbs |
C119-2 |
Pair - 14" backs, 30" length with 18" L.C
used on M400 Series |
72 lbs |
C119-3 |
Pair - 15 ½"
backs, 25" length with 13" L.C. used on C62,
C74 |
66 lbs |
C119-4 |
Pair - 15 ½" backs, 30" length with 15" L.C.
used on C62-15, C74-15 |
76 lbs |
C119-5 |
Pair - 15"
backs, 30" length with 20" L.C. used on B800
1500/2000 lb |
72 lbs |
C119-11 |
Pair - 12" backs, 25" length with 15" L.C.
used on B600 1500/2000 lb |
62 lbs |
C119-16 |
Pair - 15"
backs, 36" length with 20" L.C. used on B800
1500/2000 lb |
14 lbs |
Mount on forks with
shaft (ps) back plate |
C119-18 |
Pair - 12"
backs, 36" length with 18" L.C. used on EPFT
1500/2000 lb |
114 lbs |
C119-12 |
Pair - 12" backs, 30" length with 18" L.C.
used on EPFT 1500/2000 lb |
80 lbs |
C119-9 |
Pair - 14"
backs, 30" length with 20" L.C. used on PS,
PST 1500/2000 lb |
80 lbs |
C119-7 |
Pair - 14" backs, 36" length with 24" L.C.
used on PS, PST 1500/2000 lb |
114 lbs |
C119-PS-42 |
Pair - 14"
backs, 42" length with 24" L.C. used on PS,
PST 1500/2000 lb |
128 lbs |
Custom fork and
back plate sizes available, please consult
customer service |
|
Model Number |
Description and
Specifications |
Shipping Weight |
SP24 |
Slip-on
platform, 24" x 24" for 13" and 15" load
center |
32 lbs |
SP32 |
Slip-on platform, 32" x 30" for 18" and 20"
load center |
52 lbs |
SP40 |
Slip-on
platform, 40" x 36" for 24" load center |
95 lbs |
Custom platform sizes available, please
consult customer servic |
|
|
|