Technical Sales 1–800–458–3687

Wilton 720R Radial Drill Presses


  • 3' Arm Radial Drill Press
  • The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel"giving extra strength and smoothness to high torque loads
  • The spindle is made of the finest case hardened steel, for extra strength and wear
  • The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
  • The spindle is built to withstand exceptionally heavy drilling and boring loads and ti insure maximum accuracy
  • Arm raising safety device prevents arm from dropping
  • Counter balanced mechanism for spindle return
  • 6 speeds/3 feed rates make exotic materials easier to drill, bore and tap
  • Centralized control center
  • Automatic tool ejector
  • Independent arm manual clamping system, which locks and unlocks the head and column
  • Push button controls are all reduced to 110V
  • Electrical circuits are located in the built-in control box at the rear of the arm--this keeps the controls dust-and-humidity-free while making them easily accessible for maintenance
  • Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobs
  • Built-in work light
  • Coolant pump
  • Tool kit
  • Box table
There are no further details.
Model Number 720R
Part Number 720R
Motor 3HP, 230/460V, 3Ph, Prewired 230V  
Number of Spindle speeds 6 (88-1500)
Spindle Taper 4 MT
T-Slots Number and Size (in.) 3 & 3/4
Column Diameter (in.) 8-1/4
Drilling Capacity Cast Iron (in.) 2
Drilling Capacity Mild Steel (in.) 1-1/2
Tapping Capacity Cast Iron (in.) 1
Tapping Capacity Mild Steel (in.) 3/4
Boring Capacity Steel (in.) 2-3/4
Boring Capacity Cast Iron (in.) 4
Distance Column to Spindle (max/in.) 29-1/2
Distance Column to Spindle (min/in.) 8-5/8
Travel of Head Horizontal (in.) 20-7/8
Distance Base to Spindle (max/in.) 41-3/4
Distance Base to Spindle (min/in.) 9-5/8
Arm Travel Vertical (in.) 23-13/16
Quill Travel (in.) 8-1/4
Quill Down feed Rates (IPR) .002, .004, .006  
Elevating Motor 1HP
Base Dimensions (in.) 23-5/8 x 17-1/2 x 15
Coolant Pump Motor 1/8HP
Machine Hieght from Floor (in.) 85-7/16
Table Dimensions (in.) 23-5/8 x 17-1/2 x 15
Clamping Motor 1HP
Overall Dimensions 64 x 32 x 85
Height 83 inch
Width 64 inch
Length 32 inch



JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.


There are no listed accessories.
Mfg. item #: 320033
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

Copyright © 2023 Smith-Hamilton, Inc
0.002 150419 18:39