chat now with southern tool
Technical Sales 1–800–458–3687

Winco Two Bearing Generators

2FSM2PC-1-

This belt driven generator is perfect for use on OEM equipment, such as scissor lifts, pressure washers, etc. Units are designed to rotate either direction without changing the wiring. This generator is capable of starting a 1/2hp motor.

8KS2GC-3-

This generator is ideal for power washers, welders, and marine applications. The 8KS2GC-3 puts out 8000 watts and has the capability to start a 3/4hp motor and offers 2-15 amp 120V, 2-15 amp 240V, 1-50 amp 240V receptacles, and voltmeter.

TB2400C-

This industrial designed, rugged, two bearing generator comes with double baked armatures, oversize diode and double sealed permanent bearings to insure maximum performance and life. This 2400 watt unit is capable of starting a 3/4hp motor. Offering 120V power this generator will be just what you wish for to fulfill your electrical needs.

TB4000C-

The TB4000C is a 120/240V unit that offers 4000 watts of power. All of the units in this series are designed to rotate either direction without changing the wiring, and are rated at unity power factor. Units require approximately 2hp input for each 1000 watts output from the generator.

TB6000C-

The TB6000C offers 6000 watts of power. This unit is equipped with 4-20 amp (NEMA 5-20R) 120V receptacles, 1-30 amp (NEMA L14-30R) 120/240V receptacle, and 2-25 amp circuit breakers. Each unit is tested at the factory to insure its performance and reliability.

TB7200GFI-

The TB7200GFI offers 7200 watts of power. This unit is equipped with 4-15 amp 120V (NEMA L5-15R) receptacles, 1-30 amp 120/240V (NEMA L14-30R) receptacle, and 1-30 amp and 4-15 amp circuit breakers. This generator is capable of starting a 5HP motor and is ideal for power washers, welders, and marine applications.

 

SPECIFICATIONS

Model  Watts Operating Speed Motor Starting Capacity Volts @ 60 HZ Rated AC Amps Length Width Height Weight Shaft Diameter AC Voltmeter
2FSM2PC-1 2000 3600 RPM 1/2 HP 120 16.7 15 in 6-1/2 in 6-1/4 in 59 lbs 5/8 in N/A
8KS2GC-3 8000 3600 RPM 3 HP 120/240 65.6/33.3 19 in 12 in 17-3/4 in 175 lbs 1-1/4 in Standard
TB2400C 2400 3600 RPM 1/4 HP 120 20 14.25 in 8.5 in 8.94 in 49 lbs 1.125 in N/A
TB4000C 4000 3600 RPM 1 1/2 HP 120/240 33.3/16.7 15.13 in 8.5 in 8.94 in 67 lbs 1.125 in N/A
TB6000C 6000 3600 RPM 3 HP 120/240 50/25 17.75 in 8.5 in 8.94 in 85 lbs 1.125 in N/A
TB7200GFI 7200 3600 RPM 5 HP 120/240 60/30 20.13 in 8.5 in 11.75 in 114 lbs 1.125 in N/A

 

   

    

There are no further details.
There are no further specifications.
There is no further information.
There are no listed accessories.
Copyright © 2018 Smith-Hamilton, Inc
0.003 150419 18:39