chat now with southern tool
Technical Sales 1–800–458–3687

Delta 12-1/2 inch 5 Speed Midi Lathe &am

 12-1/2" 5-Speed MIDI LATHE®

 
supernova 2 chuck easy wood tools
The recomended Chuck for this lathe
is a Teknatool G3 or SuperNova 2
Click the image above for more infomation
Dont forget your turning tools
Check out or full line of easy wood tools
 

 

The 46-455 includes 6 and 10 inch Tool Rest, spur center, Chrome 3 inch Face Plate, tool rest base, Knockout Bar, live center, wrenches.

  • Powerful 3/4 HP max, 1,725 rpm Motor
  • Large 12-1/2 inch swing capacity provides the largest capacity in its class
  • Easy front panel access to five speed controls (500; 950; 1,550; 2,700 and 4,000) reduces down time
  • Patented automatic belt tensioning system for easy and quick speed changes and sets the belt at the correct tension every time for maximum power transfer and longer tool life
  • 4 Groove Belt provides superior power to turn large objects
  • Indexing pin to lock the head stock spindle in 24 different locations for fluting and other decorative applications
  • Over Headstock On/off switch provides easy in use access
  • All cast-iron construction provides stability and is extremely durable
  • With a maximum distance between centers of 16-1/2 inch the MIDI LATHE turns objects as long as a chair leg or as short as a thimble. With the bed extension the MIDI LATHE can turn bed posts, stair spindles, baseball bats.
  • Ball-bearing live center for smooth turnings
  • On board storage for easy access to adjustment tools
  • 6 and 10 inch tool rests provides tool support in a variety of turning applications
  • Heavy-duty, steel knockout bar
Specifications
Model 46-455
Motor: 3/4 HP max, 120V, 60 HZ, 1 Phase
Motor Control: ON/OFF Switch
Speed: 500; 950; 1,550; 2,700 and 4,000 rpm
Swing Over Bed: 12-1/2 inch
Swing Over Base: 9-9/16 inch
Distance between Centers: 16-1/2 inch; with Extension: 42 inch
Drive Spindle Thread Count: 1-8 RH TPI Thread
Drive Spindle through Hole: 15/32 inch
Head and Tailstock Taper: #2 MT MT
Tailstock through Hole: 13/32 inch Self-ejecting
Tailstock Spindle Travel: 2-1/4 inch
Tool Rest: 6 and 10 inch
Length: 36 inch
Width: 11 inch
Height: 17 3/4 inch
Weight: 93 lbs

 

The 46-460 includes 6in and 10in Tool Rest, spur center, Chrome 3 in Face Plate, tool rest base, Knockout Bar, live center, wrenches.

  • Powerful 1 HP max, 1,725 rpm Motor
  • Large 12-1/2 in swing capacity provides the largest capacity in its class
  • Electronic Variable Speed with three-pulley speed ranges provide the required speeds needed to turn a project without changing belt position
  • Forward and Reversing function allows the turner to achieve a superior finish. Sanding a turned piece with the grain causes the wood fibers to lay down and remain rough. Sanding a turned piece against the grain will cut the wood fibers smooth. Rotating the turned piece in both directions is the way to achieve this super smooth finish. With our competitors the turner would need to remount the work piece backward to achieve this dual rotation. This is time consuming and often impossible. With the Delta 46-460 it is a simple flip of the switch.
  • Patented belt tensioning system for easy and quick speed changes and sets the belt at the correct tension every time for maximum power transfer and longer tool life
  • 6 groove belt provides superior power to turn large objects
  • Indexing pin to lock the head stock spindle in 24 different locations for fluting and other decorative applications
  • All cast-iron construction provides stability and is extremely durable
  • Over Headstock On/Off switch provides easy in use access
  • Ball-bearing live center
  • Includes 3in face plate, 6in tool rest and 10in tool rest. Turning long spindles require either a longer tool rest or the user to continually move the short tool rest. Turning short work requires a short spindle; the long spindle will not allow the turner to get close enough to the piece.
  • Extension Bed (Model 46-463) is a 25-1/2 in long cast-iron bed that increases the overall bed length of the 46-460 to 42in
  • On board storage for easy access to adjustment tools
  • 6in and 10in tool rests provides tool support in a variety of turning applications
  • Heavy-duty, steel knockout bar
Specifications
Model 46-460
Motor: 1 HP max, 120V, 60 Hz, 1 Phase
Motor Control: Electronic Variable Speed
Speed: 250-700, 600-1,800 and 1,350-4,000 rpm
Swing Over Bed: 12-1/2 inch
Swing Over Base: 9-9/16 inch
Distance between Centers: 16-1/2 inch; with Extension: 42 inch
Drive Spindle Thread Count: 1-8 RH TPI Thread
Drive Spindle through Hole: 15/32 inch
Head and Tailstock Taper: #2 MT MT
Tailstock through Hole: 13/32 inch Self-ejecting
Tailstock Spindle Travel: 2-1/4 inch
Tool Rest: 6 and 10 inch
Length: 36 inch
Width: 11 inch
Height: 17-3/4 inch
Weight: 97 lbs

 

Specifications
Model 46-455
Motor: 3/4 HP max, 120V, 60 HZ, 1 Phase
Motor Control: ON/OFF Switch
Speed: 500; 950; 1,550; 2,700 and 4,000 rpm
Swing Over Bed: 12-1/2 inch
Swing Over Base: 9-9/16 inch
Distance between Centers: 16-1/2 inch; with Extension: 42 inch
Drive Spindle Thread Count: 1-8 RH TPI Thread
Drive Spindle through Hole: 15/32 inch
Head and Tailstock Taper: #2 MT MT
Tailstock through Hole: 13/32 inch Self-ejecting
Tailstock Spindle Travel: 2-1/4 inch
Tool Rest: 6 and 10 inch
Length: 36 inch
Width: 11 inch
Height: 17 3/4 inch
Weight: 93 lbs

5 year warranty

DELTA will repair or replace, at it's expense, and it's option, any new DELTA machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a DELTA factory service center.

#1 BEST SELLING CHUCK
SUPER NOVA 2 CHUCK

This powerful and solid chuck is perfect for use on lathes with up to 20 inch/508mm swing. Brilliant all around geared chuck for a majority of users.

Packed with exciting innovative features and at a fantastically competitive price, the SuperNova 2 is the leading chuck of choice on the market today and reinforces NOVA as the leading brand in the chuck market.

Note: If your lathe is less than 20 inch diameter swing, please have a look at either the Nova Precision Midi or the Nova G3 chucks.  If your lathe has more than 20 inch diameter swing, please have a look at the NOVA Titan Chuck.

supernova 2 chuck

Features standard on all NOVA chucks:

  • Quality Materials.
  • Precision Machining.
  • Common Accessory Jaw Fixing Profile compatible across all NOVA chucks and accessories.
  • High Tech Precision Composite Jaw Slides.
  • Special Woodturning Dovetail Profile on Jaws.
  • Auto Safety Stop Feature. Jaw slides cant protrude past the chuck body.
  • Comprehensive Instructions.
  • Common Insert/Adaptor Fitting compatible across all NOVA chucks.
  • Safe Lock Woodworm Screw. 
  • 2 Years Warranty

Additional SuperNova 2 Features and Benefits

  • supernova 2 backFully sealed composite indexing backing plate.  Made from ultra tough Duracon composite, reinforced with stranded glass fibres for extremely long life in tough conditions. Self lubricating properties. Unique indexing function built into backing plate. Holographic sticker for NOVA authenticity.
  • Powerful Geared Grip with Tuff Lock Technology. Precise, hardened geared action delivers incredible smooth strength. Solid, vibration free.
  • Single Handed Operation. Fast and convenient when mounting your project. More time spent turning and less time spent preparing.  
  • Captured pinion and Ball nose Allen key with large, easy grip handle.  Fast, positive location, easy and comfortable to use. Rotation arrow for easy reference and fast opening and closing action. Unique, tilt away action, means it can be angled back in operation, away from work.
  • Body made from precision machined 1045 High Tensile Steel, with a polished self metal finish to allow for closer tolerances.
  • Able to take all NOVA accessories jaws. (except Titan Power grip, special designed for Titan Chuck.) 

Product Technical Specification

  • Recommended for power workholding on lathes from 350mm (14 inch) to 508mm (20 inch) diameter swing.
  • Up to 736mm/29 inch diameter bowls (using PowerGrip accessory jaws)
  • Up to 482mm/19 inch length spigots (using PowerGrip accessory jaws)  
  • Up to 310mm/12 inch bowl (using standard 50mm accessories jaw)
  • Up to 150mm/6 inch lengh x 10mm/4 inch diameter (using standard 50mm accessories jaw)
  • Full Packaged Weight (Std) 2.5kgs/5.512lbs
  • 24 Division Index built into the backing plate design.

#2 BEST SELLING CHUCK
NOVA G3 CHUCK

The Nova G3 chuck is the next generation smaller geared chuck.  Its an ideal chuck for Mini, Midi and smaller lathes with up to 360mm/14 inch diameter swing. Provides high power geared chuck option for smaller lathes.

Its light weight, and with less overhang which is perfect for smaller lathe spindles. The small 1.79 inch body length delivers less overhang from the spindle than the larger geared Chucks - the SuperNova2 Chuck and the Nova Titan Chuck, reducing stress on smaller lathe spindles.

Note: If your lathe is less than 14 inch diameter swing, please have a look at the Nova Precision Midi chuck.  If your lathe has more than 14 inch diameter swing, please have a look at the SuperNova2 Chuck or the NOVA Titan Chuck.

nova g3 chuck

Features standard on all NOVA chucks:

  • Quality Materials.
  • Precision Machining.
  • Common Accessory Jaw Fixing Profile compatible across all NOVA chucks and accessories.
  • High Tech Precision Composite Jaw Slides.
  • Special Woodturning Dovetail Profile on Jaws.
  • Auto Safety Stop Feature. Jaw slides cant protrude past the chuck body.
  • Comprehensive Instructions.
  • Common Insert/Adaptor Fitting compatible across all NOVA chucks.
  • Safe Lock Woodworm Screw. 
  • 2 Years Warranty

Additional G3 Features and Benefits

  • nova g3Small, Compact Design. Minimises load on small spindles and bearings.

  • Precision Machined. 

  • Open back for easy cleaning.

  • Powerful Geared Grip with Tuff Lock Technology. Precise, hardened geared action delivers incredible smooth strength. Solid, vibration free.

  • Single Handed Operation. Chuck key has fast, positive location, easy and comfortable to use. nova g3More time spent turning and less time spent preparing.  

  • Body made from precision machined 1045 High Tensile Steel, with a polished self metal finish to allow for closer tolerances.

  • Able to take all NOVA accessories jaws. However please note: the larger accessory jaws in the NOVA chuck range are not recommended for use on the NOVA G3 Chuck.  For more information, consult your NOVA Accessory Jaw Manual, or the NOVA Accessory Webpages.
  • 2 Year Warranty.

Product Technical Specification

  • Recommended for power workholding on lathes up to 400mm/14 inch diameter swing.
  • Up to 350mm/14 inch diameter bowls using 50mm/2 inch Jaws (supplied with chuck)
  • Up to 50mm/2 inch length spigots (using 50mm/2 inch Jaws (supplied with chuck) 
  • Full Packaged Weight (Std) 1.4kgs/3.1lbs.

 

Compatibilityjaws

Capable to take entire NOVA Jaws range. (except Titan Power Grip which specially designed for Titan Chuck)

Only NOVA Chucks give you the same jaw fixing system and same insert/adaptor system across all chuck models.

This means all accessory jaws in the range fit all the chucks in the range, including older chuck models, giving you the ultimate flexibility. In buying a NOVA chuck, you can be confident that whether you want to move up or down the range, any accessories you have invested in will Fit.

Standard Equipment

  • Chuck Body and Jaw Slides (Comes fully assembled)
  • 50mm/2 inch Jaws
  • Safe Lock Woodworm Screw
  • Manual and Fastenings
  • Display/Storage Box
  • T Bar Allen Head Handle with Soft Plastic Grip
  • Insert/Adaptor (some resellers may sell this separately, check with them)

Threads Covered:

  • Std Insert/Adaptor Type Chuck (Code 23055) Requires an insert to fit to lathe. Some resellers may sell this separately, check with them.

  • M33x3.5 Dedicated Threaded Chuck (Code 23062)

 

 

 

Teknatool Wood Turning Lathe Chucks, Jaws and Inserts
Teknatool Wood Turning Lathe Chucks
23055 Supernova2 Chuck Insert Version
48202 G3 Chuck Insert Version
IDNS Insert Nova 1"  8 TPI RH (For JWL-1442VSK)
ILNS Insert Nova 1 1/4"  8 TPI UNS (for JWL-1642EVS and JWL-1642EVS-2)
INNS Insert Nova Blank (Allows you to customize a insert for any lathe)

*** Chucks Require Seperate Insert for Final Insulation & Additional Jaws Sizes are Available ***

 

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other type of tool on the market. Designed to be kept flat on the tool rest and level to the floor, the Easy Rougher will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening. The tool design provides support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to take the pounding that you would normally suffer through when using a conventional bowl gouge for roughing. No more white knuckling a bowl gouge.

  • Cuts left, right and straight in without changing approach angle
  • Truly deeper cuts up to 1 inch off the diameter in one pass with the Full Size Rougher.
  • Requires very little physical strength or exertion
  • Your feet and hips stay in nearly the same position for the blank roughing process.
  • Very minimal handle bouncing on irregular shaped blanks
  • Reduced kick-back or sucking into work piece
  • Available Chip Deflector keeps most projectiles away from the face and neck
  • No intimidating cutting angles to learn and remember
  • No bevels to ride
  • No fear of a dangerous catch

Easy Finisher - Yet Another Innovation in Woodturning

Ci1 DetailWith another step forward in woodturning innovation, Easy Wood Tools now offers you a tool to take up where the Easy Rougher leaves off. The Easy Finisher has a round carbide cutter perfect for doing the inside work on smaller bowls and for larger coves on spindle work. Our carbide inserts are made in the USA and we are pleased to offer you a tool that is 100 percent made in America.

If you own one of our existing Easy Roughers, you well know by now that we deliver even more than we advertise, as hard as is was for you to believe before your first purchase. I assure you the productivity of this tool will exceed your highest expectations. You just can not predict the possibilities or joy this tool will provide you. In testing the prototypes for this new design, I found myself creating forms that were never even on my list to try because the dangers and complications of existing tools were just not worth the trouble.  Craig Jackson, Founder

Like the other Easy tools, the Easy Finishers are designed to be used with the tool rest set so that when the tool is held level the top of the cutter is on center. Then just keep it level to the floor and flat on the tool rest for all types of cuts... it does not get any easier than that. There are no complicated approach angles, or bevels to ride. The design of this tool allows the Easy Finisher to effortlessly cut from the center of a bowl out to the rim OR from the rim to the center! All without changing any angles whatsoever. You just stand in one spot and cut coming and going until you get to the shape you want.

The Easy Finisher utilizes the same carbide cutter technology as the Easy Rougher that reduces strain and fatigue, improves productivity, and virtually eliminates sharpening. It comes loaded with one round cutter and when it gets dull, you just rotate the cutter for a fresh cut. Please note: The round cutters are not interchangeable with the carbide cutters on the Easy Rougher tool bars.

When the cutter eventually gets dull, just loosen the retaining screw and rotate cutter about 1/4 of a turn, then re-tighten the screw.

We promise this tool will open up a whole new level of design possibilities for your craft and it will exceed your expectations. If not, return for a complete refund.

Replacement carbide cutter number is engraved right on the tool bar.

Available in four sizes - Mini, Mid-Size, Full-Size and Pro. See purchase page for all products, sizes and accessories.

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Detailer tools really pick up where other tools leave off and provide another level of woodturning creativity as the unique diamond cutter shape fits in tight places where the cutters on the other tools will just not fit.

These tools were designed for the primary purpose of doing the small intricate work and cutting final details on your projects such as small coves and beads on both spindle and bowl work. They are also very handy for cutting chuck tenons and making inside reverse angle cuts for inside chucking bowls with dovetail jaws. You may find they work well for hogging your green wood projects too.

The Easy Detailers are engineered to cut going straight in employing just the nose of the tool.

The Easy Detailer tools are engineered with a reduced relief angle to the long cuttings edges making the long edges less aggressive when held in contact with the wood as the nose of the tool is cutting. In use, the long edge is intended to perform as a "control surface" and serve to be in contact with the wood just behind the cut; much like a bevel is being rubbed.

For safety reasons, avoid plunging the tool so deep into the work at once to the depth you would have both sides of the cutter in contact with the wood too greatly at the same time. This could cause too much force at once and lead to binding of the tool in the groove.

Each diamond-shaped Easy Detailer cutter is engineered to fit all size Detailer tools in our current product line. When the cutter eventually dulls, just loosen the retaining screw and rotate cutter, then re-tighten the screw.

Replacement carbide cutter number is engraved right on the tool bar.
Available in four sizes - see purchase page for all products, sizes and accessories.

PART NUMBER DESCRIPTION
2200 MID-SIZE EASY ROUGHER
3200 PRO EASY ROUGHER
6300 MID-SIZE EASY FINISHER
3400 PRO EASY FINISHER
7300 MID-SIZE EASY DETAILER
3700 PRO EASY DETAILER

 

46-455
12 1/2 IN. 5-SPEED MIDI-LATHE?
Mfg. item #: 46-455
PL-46-455
$60 for Delta orders between $300 and $649. Lower rates may apply to larger orders. No extra charge for residential deliveries. $30 liftgate fee, if required.1013
$599.99

2013
46-460
12 1/2 IN. VARIABLE SPEED MIDI-LATHE
Mfg. item #: 46-460
PL-46-460
Call for freight quote on this item or we will confirm freight charges before shipping.1
$708.28

535
23055
SUPERNOVA2 CHUCK INSERT VERSION
Mfg. item #: 23055
TEK23055
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$165.99

63
48202
G3 CHUCK INSERT VERSION
Mfg. item #: 48202
TEK48202
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$119.99

63
IDNS
INSERT NOVA 1 8 TPI RH
Mfg. item #: IDNS
TEKIDNS
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$22.99

63   2
ILNS
INSERT NOVA 1 1/4 8 TPI UNS
Mfg. item #: ILNS
TEKILNS
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$22.99

63
INNS
INSERT NOVA BLANK
Mfg. item #: INNS
TEKINNS
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$22.99

63
2200
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY ROUGHER ** USE CI2-SQ - GENUINE EWT REPLACEMENT CARBIDE - REPLACEMENT CUTTER OPTION: CI2-R2
Mfg. item #: 2200
EASY2200
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

210
3200
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY ROUGHER ** USE CI1-R4 - GENUINE EWT REPLACEMENT CARBIDE - REPLACEMENT CUTTER OPTIONS: CI1-SQ OR CI1-R2
Mfg. item #: 3200
EASY3200
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.98

210
6300
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY FINISHER ** USE CI3 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 6300
EASY6300
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

210
3400
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY FINISHER ** USE CI0 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 3400
EASY3400
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.98

210
7300
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY DETAILER ** USE CI4 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 7300
EASY7300
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

210
3700
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY DETAILER ** USE CI4 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 3700
EASY3700
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.98

210
Copyright © 2018 Smith-Hamilton, Inc
0.015 160913 08:05