The Blastmaster 120 Remote Control System allows the operator to remotely activate and deactivate the abrasive blasting pot from the nozzle, eliminating the need for a pot tender.
OSHA requires an abrasive blasting pot to be equipped with a remote control system, which only operates with continuous hand pressure and closes immediately upon release of the control switch by the operator (29 CFR 1910.244(b)). The remote control system meets the OSHA requirement by providing a Fail-to-Safe configuration, which will deactivate the remote control system in the event the operator drops or loses control of the remote control switch.
A heavy-duty handle, 10 inch semi-pneumatic tires, and lifting lugs allow the abrasive blasting pot to be maneuvered quickly and easily around the work site.
The Blastmaster 120 Remote Control System is a dual Fail-to-Safe configuration including a 1/2 inch inlet valve,
1/2 inch diaphragm valve, outlet valve, remote control line, and a remote control switch.
The Blastmaster 1.0 cu. ft. M-Series Abrasive Blasting Pot steep angle, 90 degree cone bottom provides
significantly improved abrasive flow versus a 60 degree dished cone.
Blastmaster Junior Extractor Moisture SeparatorBlastmaster Junior Extractor Moisture Separator removes excess moisture, oil,
and other debris from compressed air before entering the abrasive blasting pot.
Abrasive Screen, Heavy-Duty Lid and UmbrellaThe abrasive screen, heavy-duty lid and umbrella help keep damaging debris out of the abrasive blasting pot.
|1.0 Cu. Ft. C-Series Abrasive Blasting Pots|
|10101081||Pneumatic Remote Control System and 1/2 inch Metering Valve|
|10101084||120V AC Electric Remote Control System and 1/2 inch Metering Valve|
|PKA||Add a 1/2 inch Moisture Separator (Installed)|